nater_tot/generic-motion-ctrl-v1

A 70×55 mm RP2040 motion-control board with USB‑C/3.3 V regulation, QSPI flash, dual TMC2209 stepper drivers for 12–24 V motors, encoder/limit-switch I/O, and protected power/ground hardware.

Version
1.0.1
License
unset
Stars
0

imports/AP2112K_3_3TRG1.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["VIN"],
  pin2: ["GND"],
  pin3: ["EN"],
  pin4: ["NC"],
  pin5: ["VOUT"]
} as const

const pinAttributes = {
  pin1: {isInput: true, requiresPower: true, mustBeConnected: true, shouldHaveDecouplingCapacitor: true, recommendedDecouplingCapacitorCapacitance: "1uF"},
  pin2: {requiresGround: true, mustBeConnected: true},
  pin4: {doNotConnect: true},
  pin5: {isOutput: true, providesPower: true, providesVoltage: "3.3V", shouldHaveDecouplingCapacitor: true, recommendedDecouplingCapacitorCapacitance: "1uF"},
  pin3: {isInput: true}
} satisfies NonNullable<ChipProps["pinAttributes"]>

export const AP2112K_3_3TRG1 = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C51118"
  ]
}}
      manufacturerPartNumber="AP2112K-3.3TRG1"
      footprint="dfn6_missing(5)_p0.95mm_w3.7mm_pw0.62mm_pl1.1mm_pin1location(leftside,bottom)"
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C51118.obj?uuid=6d166d1d6c064b99aa79465714e989c1",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C51118.step?uuid=6d166d1d6c064b99aa79465714e989c1",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: -0.000012700000070253736, y: 0, z: -0.15 },
      }}
      {...props}
    />
  )
}