mohan-bee/fitness-band

validation/release-main-placement.log

Each child in a list should have a unique "key" prop.

Check the render method of `MainBoard`. It was passed a child from FlexConnections. See https://react.dev/link/warning-keys for more information.
Each child in a list should have a unique "key" prop.

Check the render method of `board`. It was passed a child from MainBoard. See https://react.dev/link/warning-keys for more information.
Each child in a list should have a unique "key" prop.

Check the render method of `FlexLanding`. See https://react.dev/link/warning-keys for more information.
placement summary: 1 suboptimal orientation

worst issues:
1. C10 connections cross the routing path between its pads. Suggested move: rotate C10 180 degrees.

board top-layer utilization:
- occupied: 33.043% (396.521mm^2 of 1200mm^2)
- empty spaces over 5% of board area:
  - 7.035% (84.417mm^2); bounds=(minX=11.45mm, maxX=25mm, minY=5.77mm, maxY=12mm)
  - 5.857% (70.283mm^2); bounds=(minX=-6.625mm, maxX=0.75mm, minY=-12mm, maxY=-2.47mm)

board-edge status:
- U1: 0.6mm inside left edge
- J_SWD: 2.05mm inside top edge
- U2: 4.6mm inside bottom edge
- R7: 6.68mm inside bottom edge
- R8: 8.68mm inside bottom edge
- R9: 9.68mm inside top edge
- U3: 5.86mm inside bottom edge
- L1: 5.057mm inside bottom edge
- J_BAT: 0.5mm inside top edge
- J_CHG: 0.35mm inside bottom edge
- F1: 2.325mm inside bottom edge
- D1: 3.9mm inside bottom edge
- D2: 1.275mm inside bottom edge
- U4: 5.375mm inside top edge
- U5: 5.35mm inside top edge
- U6: 6.75mm inside top edge
- J_FLEX: 0.5mm inside right edge
- C1: 9.7mm inside bottom edge
- C2: 11.18mm inside top edge
- C3: 6.6mm inside bottom edge
- C4: 2.825mm inside bottom edge
- C5: 11.1mm inside bottom edge
- C6: 9.075mm inside bottom edge
- C7: 1.875mm inside bottom edge
- C8: 1.875mm inside bottom edge
- C9: 6.18mm inside top edge
- C10: 3.38mm inside top edge
- C11: 3.68mm inside top edge
- C12: 4.525mm inside top edge
- C13: 5.525mm inside top edge
- C19: 6.38mm inside bottom edge
- R1: 11.68mm inside top edge
- R2: 6.18mm inside top edge
- R3: 6.68mm inside bottom edge
- R4: 7.22mm inside right edge
- R5: 7.22mm inside right edge

flagged components:
- C10
  source placement: placement_mode=none
  resolved placement: center=(-8mm, -8.3mm) on top; bounds=(minX=-8.78mm, maxX=-7.22mm, minY=-8.62mm, maxY=-7.98mm); size=(width=1.56mm, height=0.64mm); anchor_alignment="center"
  board edge status: 3.38mm inside top edge
  issues:
  - C10 connections cross the routing path between its pads. Suggested move: rotate C10 180 degrees.

placement drc:
Errors: 0
Warnings: 0