mohan-bee/fitness-band

A 4-layer BLE wearable mainboard with Li-ion charging/protection, 3.3/1.8 V power regulation, motion and battery sensing, plus a folded 2-layer flex sensor board carrying MAX30102 optical and TMP117 temperature sensors.

Version
0.0.2
License
unset
Stars
0

validation/release-flex-build.log

Building 1 file(s)...
Building sensor-flex.circuit.tsx...
Generating circuit JSON...
Each child in a list should have a unique "key" prop.

Check the render method of `board`. It was passed a child from SensorFlex. See https://react.dev/link/warning-keys for more information.
Each child in a list should have a unique "key" prop.

Check the render method of `FlexLanding`. See https://react.dev/link/warning-keys for more information.
Could not save autorouting paths for subcircuit_source_group_0: Saved phase paths for "source_net_0" must connect every endpoint; use autorouter="fanout" for saved escapes
Circuit JSON written to dist/sensor-flex/circuit.json
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
J_TAIL has no pin with requires_power=true
J_TAIL has no pin with requires_ground=true
All pins on J_TAIL are underspecified (no pinAttributes set)
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
J_TAIL has no courtyard
Trace [.J_TAIL > .pin5 to .TP5 > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
Generating preview images...
[sensor-flex] Generating PCB SVG...
[sensor-flex] Written pcb.svg
[sensor-flex] Generating PCB PNG...
[sensor-flex] Written pcb.png
[sensor-flex] Generating schematic SVG...
[sensor-flex] Written schematic.svg

Build complete
  Circuits  1 passed
  Options   pcb-png, svgs, autorouter-timeout
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully