mohan-bee/fitness-band

validation/publish-full-build.log

Building 2 file(s) with concurrency 2...
Generating circuit JSON for index.circuit.tsx...
Generating circuit JSON for sensor-flex.circuit.tsx...
Could not save autorouting paths for subcircuit_source_group_0: Saved phase paths for "source_net_0" must connect every endpoint; use autorouter="fanout" for saved escapes
Circuit JSON written to dist/sensor-flex/circuit.json
Warning: The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Warning: J_TAIL has no pin with requires_power=true
Warning: J_TAIL has no pin with requires_ground=true
Warning: All pins on J_TAIL are underspecified (no pinAttributes set)
Warning: No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
Warning: J_TAIL has no courtyard
Warning: Trace [.J_TAIL > .pin5 to .TP5 > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
✓ sensor-flex.circuit.tsx
Could not save autorouting paths for subcircuit_source_group_0: Only port-anchored wire/via routes can be saved
Circuit JSON written to dist/index/circuit.json
Warning: The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Warning: The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Warning: The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Warning: The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Warning: <trace#1299(from:.R7 > .pin1 to:.U2 > .PROG1) /> is missing a name. Add a name prop to make the trace easier to identify.
Warning: <trace#1301(from:.R8 > .pin1 to:.U2 > .PROG3) /> is missing a name. Add a name prop to make the trace easier to identify.
Warning: Port VBUS on U1 is missing a trace
Warning: J_SWD has no pin with requires_power=true
Warning: J_SWD has no pin with requires_ground=true
Warning: All pins on J_SWD are underspecified (no pinAttributes set)
Warning: U2 has no pin with requires_power=true
Warning: U2 has no pin with requires_ground=true
Warning: All pins on U2 are underspecified (no pinAttributes set)
Warning: J_BAT has no pin with requires_power=true
Warning: J_BAT has no pin with requires_ground=true
Warning: All pins on J_BAT are underspecified (no pinAttributes set)
Warning: J_CHG has no pin with requires_power=true
Warning: J_CHG has no pin with requires_ground=true
Warning: All pins on J_CHG are underspecified (no pinAttributes set)
Warning: D1 has no pin with requires_power=true
Warning: D1 has no pin with requires_ground=true
Warning: All pins on D1 are underspecified (no pinAttributes set)
Warning: D2 has no pin with requires_power=true
Warning: D2 has no pin with requires_ground=true
Warning: All pins on D2 are underspecified (no pinAttributes set)
Warning: U6 has no pin with requires_power=true
Warning: J_FLEX has no pin with requires_power=true
Warning: J_FLEX has no pin with requires_ground=true
Warning: All pins on J_FLEX are underspecified (no pinAttributes set)
Warning: No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
Warning: J_FLEX has no courtyard
✓ index.circuit.tsx
Generating 3D preview images for all site builds...
Transpiling entry file...
Building ESM bundle...
ESM bundle written to dist/index.js
Building CommonJS bundle...
Writing CJS bundle to: /Users/mohan/Documents/Codex/2026-10-21/screenless-fitness-tracker-custom-pcb-plan/outputs/fitness-band/dist/index.cjs
CommonJS bundle written to dist/index.cjs
Generating type declarations...
Type declarations written to dist/index.d.ts
Transpilation complete!

Build complete
  Circuits  2 passed
  Options   site, transpile, autorouter-timeout
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully