mohan-bee/compact-pir
Compact 3.3 V ESP8684 wireless motion/GPIO breakout board with LiPo regulation, 40 MHz crystal, U.FL antenna matching, digital PIR sensor, switched LED, decoupling, and dual 10-pin headers.
- Version
- 1.0.2
- License
- unset
- Stars
- 0
validation/netlist.log
Errors: 0
Warnings: 0
Readable Netlist:
COMPONENTS:
- J1: J1, source_component
- J2: J2, source_component
- U3: AP2112K-3.3TRG1
- C1: 10uF cap0603 capacitor
- C2: 10uF cap0603 capacitor
- U1: ESP8684H4X
- L1: L1, source_component
- C3: 10uF cap0603 capacitor
- C4: 100nF cap0402 capacitor
- C5: 100nF cap0402 capacitor
- C6: 100nF cap0402 capacitor
- C7: 1uF cap0402 capacitor
- C8: 10nF cap0402 capacitor
- R1: 10kΩ res0402 resistor
- C9: 1uF cap0402 capacitor
- R2: 10kΩ res0402 resistor
- R3: 10kΩ res0402 resistor
- R4: 499Ω res0402 resistor
- J3: U.FL-R-SMT-1(80)
- C10: 1.5pF cap0201 capacitor
- L2: L2, source_component
- C11: 1.5pF cap0201 capacitor
- Y1: Y1, source_component
- L3: L3, source_component
- C12: 18pF cap0402 capacitor
- C13: 18pF cap0402 capacitor
- U2: S18-L262B-2
- R5: 100Ω res0402 resistor
- C14: 1uF cap0402 capacitor
- C15: 100nF cap0402 capacitor
- Q1: MMBT3904(RANGE:100-300)
- R6: 150Ω res0603 resistor
- R7: 2.2kΩ res0402 resistor
- R8: 100kΩ res0402 resistor
NET: GPIO0
- U1 GPIO0
- J2 IO0
NET: GPIO1
- U1 GPIO1
- J2 IO1
NET: GPIO3
- U1 GPIO3
- J2 IO3
NET: GPIO4
- U1 MTMS
- J2 IO4
NET: GPIO5
- U1 MTDI
- J2 IO5
NET: GPIO6
- U1 MTCK
- J2 IO6
NET: GPIO10
- U1 GPIO10
- J1 IO10
NET: GPIO18
- U1 GPIO18
- J1 IO18
NET: GPIO19
- U1 U0RXD
- J1 RX19
NET: V3V3_RF
- L1 pin2 (-)
- U1 VDDA3P31
- U1 VDDA3P32
NET: EN
- C9 pin1 (+)
- R1 pin2
- U1 CHIP_EN
- J1 EN
NET: GPIO9
- R2 pin2
- U1 GPIO9
- J1 BOOT9
NET: GPIO8
- R3 pin2
- U1 GPIO8
- J1 IO8
NET: CHIP_TX
- R4 pin1
- U1 U0TXD
NET: UART_TX
- R4 pin2
- J1 TX20
NET: GPIO2
- U2 REL
- U1 GPIO2
- J2 PIR2
NET: V3V3
- R5 pin1
- R3 pin1
- R2 pin1
- R1 pin1
- C8 pin1 (+)
- C7 pin1 (+)
- C6 pin1 (+)
- C5 pin1 (+)
- C4 pin1 (+)
- C3 pin1 (+)
- L1 pin1 (+)
- U1 VDDA1
- U1 VDDA2
- U1 VDD3P3_CPU
- U1 VDD3P3_RTC
- C2 pin1 (+)
- U3 VOUT
- J1 3V3
NET: PIR_VDD
- C15 pin1 (+)
- C14 pin1 (+)
- R5 pin2
- U2 VDD
- U2 OEN
NET: LED_NEG
- Q1 pin3
- J2 LED_NEG
NET: VBAT
- R6 pin1
- C1 pin1 (+)
- U3 EN
- U3 VIN
- J1 BAT
NET: LED_POS
- R6 pin2
- J2 LED_POS
NET: GPIO7
- R7 pin1
- U1 MTDO
- J2 LED7
NET: LED_BASE
- R8 pin1
- R7 pin2
- Q1 pin1
NET: GND
- R8 pin2
- Q1 pin2
- C15 pin2 (-)
- C14 pin2 (-)
- U2 VSS
- U2 SENS
- U2 ONTIME
- C13 pin2 (-)
- C12 pin2 (-)
- Y1 pin4
- Y1 pin2
- C11 pin2 (-)
- C10 pin2 (-)
- J3 GND2
- J3 GND1
- C9 pin2 (-)
- C8 pin2 (-)
- C7 pin2 (-)
- C6 pin2 (-)
- C5 pin2 (-)
- C4 pin2 (-)
- C3 pin2 (-)
- U1 EP
- C2 pin2 (-)
- C1 pin2 (-)
- U3 GND
- J1 GND
NET: RF_CHIP
- L2 pin2 (-)
- C10 pin1 (+)
- U1 ANT
NET: RF_ANT
- C11 pin1 (+)
- L2 pin1 (+)
- J3 SIG
NET: XTAL_P
- L3 pin1 (+)
- U1 XTAL_P
NET: XTAL_LOAD
- C12 pin1 (+)
- L3 pin2 (-)
- Y1 pin1
NET: XTAL_N
- C13 pin1 (+)
- Y1 pin3
- U1 XTAL_N
COMPONENT_PINS:
J1 (2.54-1*10PPin)
- pin1(BAT): NETS(VBAT)
- pin2(GND): NETS(GND)
- pin3(3V3): NETS(V3V3)
- pin4(EN): NETS(EN)
- pin5(TX20): NETS(UART_TX)
- pin6(RX19): NETS(GPIO19)
- pin7(BOOT9): NETS(GPIO9)
- pin8(IO8): NETS(GPIO8)
- pin9(IO18): NETS(GPIO18)
- pin10(IO10): NETS(GPIO10)
J2 (2.54-1*10PPin)
- pin1(LED_POS): NETS(LED_POS)
- pin2(LED_NEG): NETS(LED_NEG)
- pin3(IO0): NETS(GPIO0)
- pin4(IO1): NETS(GPIO1)
- pin5(PIR2): NETS(GPIO2)
- pin6(IO3): NETS(GPIO3)
- pin7(IO4): NETS(GPIO4)
- pin8(IO5): NETS(GPIO5)
- pin9(IO6): NETS(GPIO6)
- pin10(LED7): NETS(GPIO7)
U3 (AP2112K-3.3TRG1)
- pin1(VIN): NETS(VBAT)
- pin2(GND): NETS(GND)
- pin3(EN): NETS(VBAT)
- pin4(NC): NOT_CONNECTED
- pin5(VOUT): NETS(V3V3)
C1 (10uF cap0603)
- pin1(anode, pos, left): NETS(VBAT)
- pin2(cathode, neg, right): NETS(GND)
C2 (10uF cap0603)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
U1 (ESP8684H4X)
- pin1(ANT): NETS(RF_CHIP)
- pin2(VDDA3P32): NETS(V3V3_RF)
- pin3(VDDA3P31): NETS(V3V3_RF)
- pin4(GPIO0): NETS(GPIO0)
- pin5(GPIO1): NETS(GPIO1)
- pin6(GPIO2): NETS(GPIO2)
- pin7(CHIP_EN): NETS(EN)
- pin8(GPIO3): NETS(GPIO3)
- pin9(MTMS): NETS(GPIO4)
- pin10(MTDI): NETS(GPIO5)
- pin11(VDD3P3_RTC): NETS(V3V3)
- pin12(MTCK): NETS(GPIO6)
- pin13(MTDO): NETS(GPIO7)
- pin14(GPIO8): NETS(GPIO8)
- pin15(GPIO9): NETS(GPIO9)
- pin16(GPIO10): NETS(GPIO10)
- pin17(VDD3P3_CPU): NETS(V3V3)
- pin18(GPIO18): NETS(GPIO18)
- pin19(U0RXD): NETS(GPIO19)
- pin20(U0TXD): NETS(CHIP_TX)
- pin21(VDDA2): NETS(V3V3)
- pin22(XTAL_N): NETS(XTAL_N)
- pin23(XTAL_P): NETS(XTAL_P)
- pin24(VDDA1): NETS(V3V3)
- pin25(EP): NETS(GND)
L1 (LQG15HS2N0S02D)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(V3V3_RF)
C3 (10uF cap0603)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
C4 (100nF cap0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
C5 (100nF cap0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
C6 (100nF cap0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
C7 (1uF cap0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
C8 (10nF cap0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GND)
R1 (10kΩ res0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(EN)
C9 (1uF cap0402)
- pin1(anode, pos, left): NETS(EN)
- pin2(cathode, neg, right): NETS(GND)
R2 (10kΩ res0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GPIO9)
R3 (10kΩ res0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(GPIO8)
R4 (499Ω res0402)
- pin1(anode, pos, left): NETS(CHIP_TX)
- pin2(cathode, neg, right): NETS(UART_TX)
J3 (U.FL-R-SMT-1(80))
- pin1(SIG): NETS(RF_ANT)
- pin2(GND2): NETS(GND)
- pin3(GND1): NETS(GND)
C10 (1.5pF cap0201)
- pin1(anode, pos, left): NETS(RF_CHIP)
- pin2(cathode, neg, right): NETS(GND)
L2 (LQP03TG2N7B02D)
- pin1(anode, pos, left): NETS(RF_ANT)
- pin2(cathode, neg, right): NETS(RF_CHIP)
C11 (1.5pF cap0201)
- pin1(anode, pos, left): NETS(RF_ANT)
- pin2(cathode, neg, right): NETS(GND)
Y1 (3225 40M 12PF 10PPM)
- pin1(left1, X1): NETS(XTAL_LOAD)
- pin2(gnd2, top1, gnd1): NETS(GND)
- pin3(right1, X2): NETS(XTAL_N)
- pin4(gnd1, bottom1, gnd2): NETS(GND)
L3 (LQW15AN24NH00D)
- pin1(anode, pos, left): NETS(XTAL_P)
- pin2(cathode, neg, right): NETS(XTAL_LOAD)
C12 (18pF cap0402)
- pin1(anode, pos, left): NETS(XTAL_LOAD)
- pin2(cathode, neg, right): NETS(GND)
C13 (18pF cap0402)
- pin1(anode, pos, left): NETS(XTAL_N)
- pin2(cathode, neg, right): NETS(GND)
U2 (S18-L262B-2)
- pin1(REL): NETS(GPIO2)
- pin2(ONTIME): NETS(GND)
- pin3(OEN): NETS(PIR_VDD)
- pin4(VDD): NETS(PIR_VDD)
- pin5(SENS): NETS(GND)
- pin6(VSS): NETS(GND)
R5 (100Ω res0402)
- pin1(anode, pos, left): NETS(V3V3)
- pin2(cathode, neg, right): NETS(PIR_VDD)
C14 (1uF cap0402)
- pin1(anode, pos, left): NETS(PIR_VDD)
- pin2(cathode, neg, right): NETS(GND)
C15 (100nF cap0402)
- pin1(anode, pos, left): NETS(PIR_VDD)
- pin2(cathode, neg, right): NETS(GND)
Q1 (MMBT3904(RANGE:100-300))
- pin1(B): NETS(LED_BASE)
- pin2(E): NETS(GND)
- pin3(C): NETS(LED_NEG)
R6 (150Ω res0603)
- pin1(anode, pos, left): NETS(VBAT)
- pin2(cathode, neg, right): NETS(LED_POS)
R7 (2.2kΩ res0402)
- pin1(anode, pos, left): NETS(GPIO7)
- pin2(cathode, neg, right): NETS(LED_BASE)
R8 (100kΩ res0402)
- pin1(anode, pos, left): NETS(LED_BASE)
- pin2(cathode, neg, right): NETS(GND)
Related Packages
More from this authormohan-bee/rc-link-breakaway-panelA four-layer RC link panel combining an STM32/E28 2.4‑GHz transmitter with USB-RP2040 socket and an STM32/E28 receiver providing six buffered PWM servo outputs, regulated 3.3‑V power, headers, controls, and protection/decoupling.
Similar packageimrishabh18/motor-driver-breakout"A 30x30mm TB6612FNG motor driver board with dual 8-pin headers and bypass capacitors for motor control and power regulation"
This summary captures the key physical characteristics:
- Uses TB6612FNG motor driver chip
- 30x30mm board size
- Dual 8-pin headers (JP1 and JP2)
- Includes decoupling capacitors (C1, C2, C3)
- Purpose is motor control and power management
Discover something newastra/nema17-stepper-motor-controller-spring-clamp-rp2040A 4-layer RP2040 controller board that negotiates USB‑C PD motor power and drives a NEMA17 stepper via a DRV8825, with current sensing, thermal shutdown, RGB status LED, buzzer alarm, optional AS5600 encoder, protection/filtering, and test points.