krishnax12/tensa-zangetsu-keychain-nfc

patches/@tscircuit%2Fcore@0.0.1971.patch

diff --git a/dist/index.js b/dist/index.js
index a877d0f6c2b62f0d24835198b5f8901afe0e9626..464d04a6a8249a3125b087e571af7fa19880d681 100644
--- a/dist/index.js
+++ b/dist/index.js
@@ -3018,10 +3018,27 @@ var getObstaclesFromRoute = (route, source_trace_id, { viaDiameter = 0.5 } = {})
     const prev = i - 1 >= 0 ? route[i - 1] : null;
     const isHorz = isCloseTo(start.y, end.y);
     const isVert = isCloseTo(start.x, end.x);
+    const traceWidth = start.width ?? end.width ?? 0.1;
     if (!isHorz && !isVert) {
-      throw new Error(
-        `getObstaclesFromTrace currently only supports horizontal and vertical traces (not diagonals) Conflicting trace: ${source_trace_id}, start: (${start.x}, ${start.y}), end: (${end.x}, ${end.y})`
-      );
+      // Conservatively cover diagonal copper with short axis-aligned rectangles.
+      // The router chooses the route; these rectangles only describe fixed copper.
+      const segmentCount = Math.ceil(Math.hypot(end.x - start.x, end.y - start.y) / 0.25);
+      const stepX = (end.x - start.x) / segmentCount;
+      const stepY = (end.y - start.y) / segmentCount;
+      for (let segmentIndex = 0; segmentIndex < segmentCount; segmentIndex++) {
+        obstacles.push({
+          type: "rect",
+          layers: [start.layer],
+          center: {
+            x: start.x + stepX * (segmentIndex + 0.5),
+            y: start.y + stepY * (segmentIndex + 0.5)
+          },
+          width: Math.abs(stepX) + traceWidth,
+          height: Math.abs(stepY) + traceWidth,
+          connectedTo: [source_trace_id]
+        });
+      }
+      continue;
     }
     const obstacle = {
       type: "rect",
@@ -3030,10 +3047,8 @@ var getObstaclesFromRoute = (route, source_trace_id, { viaDiameter = 0.5 } = {})
         x: (start.x + end.x) / 2,
         y: (start.y + end.y) / 2
       },
-      width: isHorz ? Math.abs(start.x - end.x) : 0.1,
-      // TODO use route width
-      height: isVert ? Math.abs(start.y - end.y) : 0.1,
-      // TODO use route width
+      width: Math.abs(start.x - end.x) + traceWidth,
+      height: Math.abs(start.y - end.y) + traceWidth,
       connectedTo: [source_trace_id]
     };
     obstacles.push(obstacle);
@@ -3506,7 +3521,8 @@ var getObstaclesFromCircuitJson = (circuitJson, connMap) => {
             {
               x: rp.x,
               y: rp.y,
-              layer: rp.route_type === "wire" ? rp.layer : rp.from_layer
+              layer: rp.route_type === "wire" ? rp.layer : rp.from_layer,
+              width: rp.route_type === "wire" ? rp.width : undefined
             }
           ];
         }),
@@ -9811,26 +9827,28 @@ var PlatedHole = class extends PrimitiveComponent2 {
         pcb_group_id: this.getGroup()?.pcb_group_id ?? void 0
       });
       this.pcb_plated_hole_id = pcb_plated_hole.pcb_plated_hole_id;
-      db.pcb_solder_paste.insert({
-        layer: "top",
-        shape: "circle",
-        // @ts-ignore: no idea why this is triggering
-        radius: props.outerDiameter / 2,
-        x: position.x,
-        y: position.y,
-        subcircuit_id: subcircuit?.subcircuit_id ?? void 0,
-        pcb_group_id: this.getGroup()?.pcb_group_id ?? void 0
-      });
-      db.pcb_solder_paste.insert({
-        layer: "bottom",
-        shape: "circle",
-        // @ts-ignore: no idea why this is triggering
-        radius: props.outerDiameter / 2,
-        x: position.x,
-        y: position.y,
-        subcircuit_id: subcircuit?.subcircuit_id ?? void 0,
-        pcb_group_id: this.getGroup()?.pcb_group_id ?? void 0
-      });
+      if (!isCoveredWithSolderMask) {
+        db.pcb_solder_paste.insert({
+          layer: "top",
+          shape: "circle",
+          // @ts-ignore: no idea why this is triggering
+          radius: props.outerDiameter / 2,
+          x: position.x,
+          y: position.y,
+          subcircuit_id: subcircuit?.subcircuit_id ?? void 0,
+          pcb_group_id: this.getGroup()?.pcb_group_id ?? void 0
+        });
+        db.pcb_solder_paste.insert({
+          layer: "bottom",
+          shape: "circle",
+          // @ts-ignore: no idea why this is triggering
+          radius: props.outerDiameter / 2,
+          x: position.x,
+          y: position.y,
+          subcircuit_id: subcircuit?.subcircuit_id ?? void 0,
+          pcb_group_id: this.getGroup()?.pcb_group_id ?? void 0
+        });
+      }
     } else if (props.shape === "pill" && props.rectPad) {
       const pcb_plated_hole = db.pcb_plated_hole.insert({
         pcb_component_id,