imrishabh18/nema-23-stepper-controller

A 4-layer NEMA23 stepper motor controller PCB combining an RP2040, DRV8462 dual-phase driver, USB-C/28V power protection, current/voltage/temperature sensing, alarms, and optional magnetic encoder.

Version
1.4.27
License
unset
Stars
1

imports/data-usb-footprint.tsx

// Existing mid-mount USB land pattern with a shorter land at each locating peg.
export const dataUsbFootprint = (
  <footprint>
    <hole pcbX={-2.89} pcbY={1.055} diameter={0.7} />
    <hole pcbX={2.89} pcbY={1.055} diameter={0.7} />
    <platedhole pcbX={-4.325} pcbY={1.575} portHints={["13"]} shape={"pill"} outerWidth={1.1} outerHeight={2} holeWidth={0.6} holeHeight={1.5} />
    <platedhole pcbX={4.325} pcbY={1.575} portHints={["14"]} shape={"pill"} outerWidth={1.1} outerHeight={2} holeWidth={0.6} holeHeight={1.5} />
    <platedhole pcbX={-4.325} pcbY={-2.625} portHints={["15"]} shape={"pill"} outerWidth={1.2} outerHeight={1.7999999999999998} holeWidth={0.6} holeHeight={1.2} />
    <platedhole pcbX={4.325} pcbY={-2.625} portHints={["16"]} shape={"pill"} outerWidth={1.2} outerHeight={1.7999999999999998} holeWidth={0.6} holeHeight={1.2} />
    <smtpad pcbX={-3.2} pcbY={2.145} portHints={["17"]} width={0.55} height={1.06} shape={"rect"} />
    <smtpad pcbX={-2.4} pcbY={2.125} portHints={["18"]} width={0.55} height={1.1} shape={"rect"} />
    <smtpad pcbX={-1.75} pcbY={2.125} portHints={["19"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={-1.25} pcbY={2.125} portHints={["20"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={-0.75} pcbY={2.125} portHints={["21"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={-0.25} pcbY={2.125} portHints={["22"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={0.25} pcbY={2.125} portHints={["23"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={0.75} pcbY={2.125} portHints={["24"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={1.25} pcbY={2.125} portHints={["25"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={1.75} pcbY={2.125} portHints={["26"]} width={0.3} height={1.1} shape={"rect"} />
    <smtpad pcbX={2.4} pcbY={2.125} portHints={["27"]} width={0.55} height={1.1} shape={"rect"} />
    <smtpad pcbX={3.2} pcbY={2.145} portHints={["28"]} width={0.55} height={1.06} shape={"rect"} />
    <silkscreenpath route={[{"x":-3.825,"y":-1.525},{"x":-3.825,"y":0.375}]} strokeWidth={0.1} />
    <silkscreenpath route={[{"x":3.825,"y":-1.525},{"x":3.825,"y":0.375}]} strokeWidth={0.1} />
    <silkscreenpath route={[{"x":-3.825,"y":-5.225},{"x":3.825,"y":-5.225}]} strokeWidth={0.1} />
    <silkscreentext text={"{NAME}"} pcbX={0} pcbY={3.675} fontSize={0.7} />
    <courtyardrect pcbX={0} pcbY={-1.275} width={10.35} height={8.399999999999999} />
  </footprint>
)