imrishabh18/nema-23-stepper-controller

A 4-layer NEMA23 stepper motor controller PCB combining an RP2040, DRV8462 dual-phase driver, USB-C/28V power protection, current/voltage/temperature sensing, alarms, and optional magnetic encoder.

Version
1.4.27
License
unset
Stars
1

imports/AP63205WU_7.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["FB"],
  pin2: ["EN"],
  pin3: ["VIN"],
  pin4: ["GND"],
  pin5: ["SW"],
  pin6: ["BST"]
} as const

const pinAttributes = {
  pin3: {requiresPower: true},
  pin4: {requiresGround: true}
} as const

export const AP63205WU_7 = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C2071056"
  ]
}}
      manufacturerPartNumber="AP63205WU-7"
      footprint={<footprint>
        <smtpad portHints={["pin6"]} pcbX="-0.94996mm" pcbY="1.1999976mm" width="0.5500116mm" height="1.1999976mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.94996mm" pcbY="1.1999976mm" width="0.5500116mm" height="1.1999976mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.94996mm" pcbY="-1.1999976mm" width="0.5500116mm" height="1.1999976mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0mm" pcbY="-1.1999976mm" width="0.5500116mm" height="1.1999976mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-0.94996mm" pcbY="-1.1999976mm" width="0.5500116mm" height="1.1999976mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0mm" pcbY="1.1999976mm" width="0.5500116mm" height="1.1999976mm" shape="rect" />
<silkscreenpath route={[{"x":-1.4999969999999934,"y":-0.7999984000000069},{"x":-1.4999969999999934,"y":0.7999984000000069}]} />
<silkscreenpath route={[{"x":1.4999970000000076,"y":0.7999984000000069},{"x":1.4999970000000076,"y":-0.7999984000000069}]} />
<silkscreencircle pcbX="-0.975106mm" pcbY="-2.124964mm" radius="0.127mm" />
<silkscreentext text="{NAME}" pcbX="0mm" pcbY="2.8034mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.699984399999991,"y":2.0499963999999977},{"x":1.700009800000018,"y":2.0499963999999977},{"x":1.700009800000018,"y":-2.0499963999999977},{"x":-1.699984399999991,"y":-2.0499963999999977},{"x":-1.699984399999991,"y":2.0499963999999977}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2071056.obj?uuid=222e8593009c495bb3d3af0c08fa5e6a",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2071056.step?uuid=222e8593009c495bb3d3af0c08fa5e6a",
        pcbRotationOffset: 90,
        modelOriginPosition: { x: 0, y: 0.000012700000013410317, z: 0.050795 },
      }}
      {...props}
    />
  )
}