hrithik18k/switch-pcb

touch-build.log

Building 1 file(s)...
Building touch.circuit.tsx...
Generating circuit JSON...
Wrote debug artifact: dist\touch-router\placement-unrouted.png
Autorouting <board#65 /> phase 1/1 start: connections=4, obstacles=19, previous_traces=0, router=tscircuit, solver=AutoroutingPipelineSolver9_PreloadedTraceGraph, cache=miss, cache_id=12cad7cd/8100b9e8
  connections: net.V3V3, net.GND, net.OUT, net.SENSE
  phase 1/1 progress: solver=AutoroutingPipelineSolver9_PreloadedTraceGraph solver_phase=portPointPathingSolver steps=1 progress=44% iterations_per_second=3916 elapsed=1.1s
  phase 1/1 done: routed_traces=10, jumpers=0, errors=0, elapsed=2.3s
Wrote debug artifact: dist\touch-router\phase-0-routed.png
Saved autorouting paths to .tscircuit\autorouting-artifacts\touch-circuit-tsx-6cfde57673\subcircuit_source_group_0-phase-default-order-0.pcb-trace-paths.json (import this JSON into <autoroutingphase pcbTracePaths={...} />).
Wrote debug artifact: dist\touch-router\board.meta.json
Circuit JSON written to dist\touch\circuit.json
All pins on E1 are underspecified (no pinAttributes set)
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
U1 may not have availability from jlcpcb (C2757936).
Generating preview images...
[touch] Generating PCB PNG...
[touch] Written pcb.png
[touch] Generating schematic PNG...
[touch] Written schematic.png

Build complete
  Circuits  1 passed
  Options   pcb-png, schematic-png, autorouter-debug
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully