hrithik18k/switch-pcb

power-placement.log

placement summary: 1 suboptimal orientation

worst issues:
1. J1 connections cross the routing path between its pads. Suggested move: rotate J1 180 degrees.

board top-layer utilization:
- occupied: 49.956% (1198.941mm^2 of 2400mm^2)
- empty spaces over 5% of board area:
  - 18.253% (438.064mm^2); bounds=(minX=-15.75mm, maxX=25mm, minY=-17mm, maxY=-6.25mm)
  - 10.896% (261.511mm^2); bounds=(minX=-25mm, maxX=20.48mm, minY=18.25mm, maxY=24mm)

board-edge status:
- PS1: 8.31mm inside top edge
- F1: 3.2mm inside bottom edge
- J1: 3.9mm inside left edge
- J2: 2.2mm inside right edge

flagged components:
- J1
  source placement: placement_mode=none
  resolved placement: center=(-20mm, -12.8mm) on top; bounds=(minX=-21.1mm, maxX=-18.9mm, minY=-16.4mm, maxY=-9.2mm); size=(width=2.2mm, height=7.2mm); anchor_alignment="center"
  board edge status: 3.9mm inside left edge
  issues:
  - J1 connections cross the routing path between its pads. Suggested move: rotate J1 180 degrees.

placement drc:
Errors: 0
Warnings: 0