hrithik18k/switch-pcb

power-build-release.log

Building 1 file(s)...
Building power.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist\power\circuit.json
The "F" prefix is being used with a <chip />, try using it with a <fuse />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
PS1 has no pin with requires_power=true
PS1 has no pin with requires_ground=true
F1 has no pin with requires_power=true
F1 has no pin with requires_ground=true
All pins on F1 are underspecified (no pinAttributes set)
J1 has no pin with requires_ground=true
All pins on J1 are underspecified (no pinAttributes set)
J2 has no pin with requires_power=true
J2 has no pin with requires_ground=true
All pins on J2 are underspecified (no pinAttributes set)
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
Courtyard of F1 overlaps with courtyard of J1
Autorouting was skipped because 1 PCB placement error was found. Fix the placement errors or set placementDrcChecksDisabled to true to route anyway.
Ports [J1.pin1, F1.pin2] are not connected together through the same net.
Ports [F1.pin1, PS1.AC1] are not connected together through the same net.
Ports [J1.pin2, PS1.AC2] are not connected together through the same net.
Ports [PS1.VO_POS, J2.pin1] are not connected together through the same net.
Ports [PS1.VO_NEG, J2.pin2] are not connected together through the same net.
Trace [J1.pin1 to F1.pin2] is not connected (it has no PCB trace)
Trace [F1.pin1 to PS1.L] is not connected (it has no PCB trace)
Trace [J1.pin2 to PS1.N] is not connected (it has no PCB trace)
Trace [PS1.VO_POS to J2.pin1] is not connected (it has no PCB trace)
Trace [PS1.VO_NEG to J2.pin2] is not connected (it has no PCB trace)
Generating preview images...
[power] Generating PCB PNG...
[power] Written pcb.png
[power] Generating schematic PNG...
[power] Written schematic.png

Build complete
  Circuits  0 passed 1 failed
  Options   pcb-png, schematic-png, autorouter-debug, autorouter-dump-srj
  Output    dist

⚠ Build completed with errors
Build exiting with code 1: circuit build errors occurred