hrithik18k/switch-pcb

power-build-approved.log

Building 1 file(s)...
Building power.circuit.tsx...
Generating circuit JSON...
Wrote debug artifact: dist\power-router\placement-unrouted.png
Autorouting <board#29 /> phase 1/1 start: connections=5, obstacles=19, previous_traces=0, router=tscircuit, solver=AutoroutingPipelineSolver9_PreloadedTraceGraph, cache=miss, cache_id=12cad7cd/a987c644
  connections: LINE_IN, LINE_FUSED, NEUTRAL, V5, GND
Wrote debug artifact: dist\power-router\phase-0.input.simple-route.json
  phase 1/1 progress: solver=AutoroutingPipelineSolver9_PreloadedTraceGraph solver_phase=edgeSolver steps=1 progress=28% iterations_per_second=4072 elapsed=989ms
  phase 1/1 done: routed_traces=5, jumpers=0, errors=0, elapsed=2.7s
Wrote debug artifact: dist\power-router\phase-0.output.traces.json
Wrote debug artifact: dist\power-router\phase-0-routed.png
Saved autorouting paths to .tscircuit\autorouting-artifacts\power-circuit-tsx-e0de364c66\subcircuit_source_group_0-phase-default-order-0.pcb-trace-paths.json (import this JSON into <autoroutingphase pcbTracePaths={...} />).
Wrote debug artifact: dist\power-router\board.meta.json
Circuit JSON written to dist\power\circuit.json
The "F" prefix is being used with a <chip />, try using it with a <fuse />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
PS1 has no pin with requires_power=true
PS1 has no pin with requires_ground=true
F1 has no pin with requires_power=true
F1 has no pin with requires_ground=true
All pins on F1 are underspecified (no pinAttributes set)
J1 has no pin with requires_ground=true
All pins on J1 are underspecified (no pinAttributes set)
J2 has no pin with requires_power=true
J2 has no pin with requires_ground=true
All pins on J2 are underspecified (no pinAttributes set)
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
Generating preview images...
[power] Generating PCB PNG...
[power] Written pcb.png
[power] Generating schematic PNG...
[power] Written schematic.png

Build complete
  Circuits  1 passed
  Options   pcb-png, schematic-png, autorouter-debug, autorouter-dump-srj
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully