hrithik18k/switch-pcb

netlist-check.log

Detected entrypoint: 'index.circuit.tsx'
trace: `key` is not a prop. Trying to access it will result in `undefined` being returned. If you need to access the same value within the child component, you should pass it as a different prop. (https://react.dev/link/special-props)
Errors: 0
Warnings: 0

Readable Netlist:
COMPONENTS:
 - U1: LOLIN D1 mini V3.1.0
 - J1: J1, source_component
 - C1: 100uF capacitor
 - C2: 100nF capacitor
 - J2: J2, source_component
 - R1: 220Ω resistor
 - R2: 100kΩ resistor
 - J3: J3, source_component
 - R3: 1kΩ resistor
 - R4: 100kΩ resistor

NET: V5
  - J2 V5
  - C2 pin1 (+)
  - C1 pin1 (+)
  - J1 V5
  - U1 V5

NET: GND
  - R2 pin2
  - J3 GND
  - J2 GND
  - C2 pin2 (-)
  - C1 pin2 (-)
  - J1 GND
  - U1 GND

NET: V3V3
  - R4 pin2
  - J3 V3V3
  - U1 V3V3

NET: R1_pos
  - U1 D6
  - R1 pin1
  - R2 pin1

NET: J2_IN
  - R1 pin2
  - J2 IN

NET: R3_pos
  - U1 D7
  - R3 pin1
  - R4 pin1

NET: J3_OUT
  - R3 pin2
  - J3 OUT


COMPONENT_PINS:
U1 (LOLIN D1 mini V3.1.0)
- pin1(RST): NOT_CONNECTED
- pin2(A0): NOT_CONNECTED
- pin3(D0): NOT_CONNECTED
- pin4(D5): NOT_CONNECTED
- pin5(D6): NETS(R1_pos)
- pin6(D7): NETS(R3_pos)
- pin7(D8): NOT_CONNECTED
- pin8(V3V3): NETS(V3V3)
- pin9(V5): NETS(V5)
- pin10(GND): NETS(GND)
- pin11(D4): NOT_CONNECTED
- pin12(D3): NOT_CONNECTED
- pin13(D2): NOT_CONNECTED
- pin14(D1): NOT_CONNECTED
- pin15(RX): NOT_CONNECTED
- pin16(TX): NOT_CONNECTED

J1
- pin1(V5): NETS(V5)
- pin2(GND): NETS(GND)

C1 (100uF undefined)
- pin1(anode, pos): NETS(V5)
- pin2(cathode, neg): NETS(GND)

C2 (100nF undefined)
- pin1(anode, pos, left): NETS(V5)
- pin2(cathode, neg, right): NETS(GND)

J2
- pin1(V5): NETS(V5)
- pin2(GND): NETS(GND)
- pin3(IN): NETS(J2_IN)

R1 (220Ω undefined)
- pin1(anode, pos, left): NETS(R1_pos)
- pin2(cathode, neg, right): NETS(J2_IN)

R2 (100kΩ undefined)
- pin1(anode, pos, left): NETS(R1_pos)
- pin2(cathode, neg, right): NETS(GND)

J3
- pin1(V3V3): NETS(V3V3)
- pin2(GND): NETS(GND)
- pin3(OUT): NETS(J3_OUT)

R3 (1kΩ undefined)
- pin1(anode, pos, left): NETS(R3_pos)
- pin2(cathode, neg, right): NETS(J3_OUT)

R4 (100kΩ undefined)
- pin1(anode, pos, left): NETS(R3_pos)
- pin2(cathode, neg, right): NETS(V3V3)