hrithik18k/switch-pcb

esp-pipeline4.log

Building 1 file(s)...
Building esp-router-trial.tsx...
Generating circuit JSON...
Wrote debug artifact: dist\esp-pipeline4\placement-unrouted.png
Autorouting <board#251 /> phase 1/1 start: connections=12, obstacles=65, previous_traces=0, router=tscircuit, version=beta_pipeline4, solver=AutoroutingPipelineSolver4, cache=miss, cache_id=a8be5a67/6d5e902b
  connections: net.V5, net.GND, net.V3V3, net.EN, net.RST, net.BOOT, net.STRAP2, net.STRAP15, net.RELAY, net.TOUCH, net.TXD, net.RXD
Wrote debug artifact: dist\esp-pipeline4\phase-0.input.simple-route.json
  phase 1/1 progress: solver=AutoroutingPipelineSolver4 solver_phase=nodeSolver steps=1 progress=0% iterations_per_second=9956 elapsed=641ms
  phase 1/1 progress: solver=AutoroutingPipelineSolver4 solver_phase=portPointPathingSolver steps=3 progress=0% iterations_per_second=7 elapsed=14.3s
  phase 1/1 progress: solver=AutoroutingPipelineSolver4 solver_phase=portPointPathingSolver steps=37 progress=0% iterations_per_second=132860 elapsed=24.6s
  phase 1/1 error after 32.7s: e ran out of iterations (capacity-autorouter@0.0.1018)
Wrote debug artifact: dist\esp-pipeline4\phase-0.input.simple-route.json
Wrote debug artifact: dist\esp-pipeline4\phase-0.error.json
Async effect error in PcbTraceRender "autorouting":
AutorouterError: e ran out of iterations (capacity-autorouter@0.0.1018)
    at runCycleAndQueueNextCycle (C:\Users\Hrithik\Documents\Codex\2026-10-28\hey-x20-2\outputs\switch-pcb\node_modules\@tscircuit\core\dist\index.js:145236:24)
    at <anonymous> (C:\Users\Hrithik\Documents\Codex\2026-10-28\hey-x20-2\outputs\switch-pcb\node_modules\@tscircuit\core\dist\index.js:145271:27)
Wrote debug artifact: dist\esp-pipeline4\board.meta.json
Circuit JSON written to dist\esp-router-trial\circuit.json
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
e ran out of iterations (capacity-autorouter@0.0.1018)
<pinheader#34 name=".J1" /> is missing a manufacturer part number and could not be resolved to a supplier part. Specify mpn, manufacturerPartNumber, or mfn, provide supplierPartNumbers, or configure a parts engine to select a part. If this part will not be assembled, mark it doNotPlace.
<pinheader#167 name=".J2" /> is missing a manufacturer part number and could not be resolved to a supplier part. Specify mpn, manufacturerPartNumber, or mfn, provide supplierPartNumbers, or configure a parts engine to select a part. If this part will not be assembled, mark it doNotPlace.
<pinheader#180 name=".J3" /> is missing a manufacturer part number and could not be resolved to a supplier part. Specify mpn, manufacturerPartNumber, or mfn, provide supplierPartNumbers, or configure a parts engine to select a part. If this part will not be assembled, mark it doNotPlace.
<pinheader#189 name=".J4" /> is missing a manufacturer part number and could not be resolved to a supplier part. Specify mpn, manufacturerPartNumber, or mfn, provide supplierPartNumbers, or configure a parts engine to select a part. If this part will not be assembled, mark it doNotPlace.
Port [J1.V5] is not connected to net [V5] by a PCB trace.
Port [U2.VIN] is not connected to net [V5] by a PCB trace.
Port [U2.EN] is not connected to net [V5] by a PCB trace.
Port [C1.pin1] is not connected to net [V5] by a PCB trace.
Port [J3.V5] is not connected to net [V5] by a PCB trace.
Port [J1.GND] is not connected to net [GND] by a PCB trace.
Port [U2.GND] is not connected to net [GND] by a PCB trace.
Port [C1.pin2] is not connected to net [GND] by a PCB trace.
Port [C2.pin2] is not connected to net [GND] by a PCB trace.
Port [C3.pin2] is not connected to net [GND] by a PCB trace.
Port [C4.pin2] is not connected to net [GND] by a PCB trace.
Port [U1.GND] is not connected to net [GND] by a PCB trace.
Port [R5.pin2] is not connected to net [GND] by a PCB trace.
Port [R6.pin2] is not connected to net [GND] by a PCB trace.
Port [J2.GND] is not connected to net [GND] by a PCB trace.
Port [J3.GND] is not connected to net [GND] by a PCB trace.
Port [J4.GND] is not connected to net [GND] by a PCB trace.
Port [U2.VOUT] is not connected to net [V3V3] by a PCB trace.
Port [U1.VCC] is not connected to net [V3V3] by a PCB trace.
Port [C2.pin1] is not connected to net [V3V3] by a PCB trace.
Port [C3.pin1] is not connected to net [V3V3] by a PCB trace.
Port [C4.pin1] is not connected to net [V3V3] by a PCB trace.
Port [R1.pin2] is not connected to net [V3V3] by a PCB trace.
Port [R2.pin2] is not connected to net [V3V3] by a PCB trace.
Port [R3.pin2] is not connected to net [V3V3] by a PCB trace.
Port [R4.pin2] is not connected to net [V3V3] by a PCB trace.
Port [J4.V3V3] is not connected to net [V3V3] by a PCB trace.
Port [U1.EN] is not connected to net [EN] by a PCB trace.
Port [R1.pin1] is not connected to net [EN] by a PCB trace.
Port [U1.RST] is not connected to net [RST] by a PCB trace.
Port [R2.pin1] is not connected to net [RST] by a PCB trace.
Port [J2.RST] is not connected to net [RST] by a PCB trace.
Port [U1.GPIO0] is not connected to net [BOOT] by a PCB trace.
Port [R3.pin1] is not connected to net [BOOT] by a PCB trace.
Port [J2.BOOT] is not connected to net [BOOT] by a PCB trace.
Port [U1.GPIO2] is not connected to net [STRAP2] by a PCB trace.
Port [R4.pin1] is not connected to net [STRAP2] by a PCB trace.
Port [U1.GPIO15] is not connected to net [STRAP15] by a PCB trace.
Port [R5.pin1] is not connected to net [STRAP15] by a PCB trace.
Port [U1.GPIO12] is not connected to net [RELAY] by a PCB trace.
Port [J3.RELAY] is not connected to net [RELAY] by a PCB trace.
Port [R6.pin1] is not connected to net [RELAY] by a PCB trace.
Port [U1.GPIO13] is not connected to net [TOUCH] by a PCB trace.
Port [J4.TOUCH] is not connected to net [TOUCH] by a PCB trace.
Port [U1.TXD0] is not connected to net [TXD] by a PCB trace.
Port [J2.TXD] is not connected to net [TXD] by a PCB trace.
Port [U1.RXD0] is not connected to net [RXD] by a PCB trace.
Port [J2.RXD] is not connected to net [RXD] by a PCB trace.
Generating preview images...
[esp-router-trial] Generating PCB PNG...
[esp-router-trial] Written pcb.png
[esp-router-trial] Generating schematic PNG...
[esp-router-trial] Written schematic.png

Build complete
  Circuits  0 passed 1 failed
  Options   pcb-png, schematic-png, autorouter-debug, autorouter-dump-srj
  Output    dist

⚠ Build completed with errors
Build exiting with code 1: circuit build errors occurred