hrithik18k/switch-pcb

build.log

Building 1 file(s)...
Building index.circuit.tsx...
Generating circuit JSON...
trace: `key` is not a prop. Trying to access it will result in `undefined` being returned. If you need to access the same value within the child component, you should pass it as a different prop. (https://react.dev/link/special-props)
Wrote debug artifact: dist\autorouter-debug\placement-unrouted.png
Autorouting <board#157 /> phase 1/1 start: connections=9, obstacles=41, previous_traces=0, router=tscircuit, solver=AutoroutingPipelineSolver9_PreloadedTraceGraph, cache=miss, cache_id=12cad7cd/225d3a68
  connections: U1.D6 to R1.pin1, R1.pin1 to R2.pin1, R1.pin2 to J2.IN, U1.D7 to R3.pin1, R3.pin1 to R4.pin1, R3.pin2 to J3.OUT, net.V5, net.GND, net.V3V3
  phase 1/1 progress: solver=AutoroutingPipelineSolver9_PreloadedTraceGraph solver_phase=topologyPlanningSolver steps=1 progress=17% iterations_per_second=1575 elapsed=1.1s
  phase 1/1 progress: solver=AutoroutingPipelineSolver9_PreloadedTraceGraph solver_phase=powerTraceExpansionSolver steps=30 progress=97% iterations_per_second=105820 elapsed=11.1s
  phase 1/1 done: routed_traces=18, jumpers=0, errors=0, elapsed=14.2s
Wrote debug artifact: dist\autorouter-debug\phase-0-routed.png
Could not save autorouting paths for subcircuit_source_group_0: Routes contain a junction or endpoint that cannot select a unique PCB port
Wrote debug artifact: dist\autorouter-debug\board.meta.json
Circuit JSON written to dist\index\circuit.json
<trace#142(from:U1.D6 to:R1.pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#143(from:R1.pin1 to:R2.pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#144(from:R1.pin2 to:J2.IN) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#145(from:U1.D7 to:R3.pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#146(from:R3.pin1 to:R4.pin1) /> is missing a name. Add a name prop to make the trace easier to identify.
<trace#147(from:R3.pin2 to:J3.OUT) /> is missing a name. Add a name prop to make the trace easier to identify.
U1 has no pin with requires_power=true
U1 has no pin with requires_ground=true
All pins on U1 are underspecified (no pinAttributes set)
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
Generating preview images...
[index] Generating PCB PNG...
[index] Written pcb.png
[index] Generating schematic PNG...
[index] Written schematic.png

Build complete
  Circuits  1 passed
  Options   pcb-png, schematic-png, autorouter-debug
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully