hrithik18k/smartknob-screen
A mixed SMT component library containing 3.3V regulators, resistors/capacitors, MOSFETs/transistors, USB-UART and sensor ICs, LEDs, connectors, an inductor, and related PCB footprints/CAD models.
- Version
- 1.0.3
- License
- Apache-2.0
- Stars
- 0
tscircuit.config.json
{
"mainEntrypoint": "screen.circuit.tsx"
}
Related Packages
More from this authorhrithik18k/punck-tscircuit-recreationA four-layer Eurorack drum/sampler controller PCB built around an STM32H743, dual QSPI flash, PCM5100 stereo DAC, TL074 analog audio circuitry, input clamps, 12V-to-3.3V power regulation, MIDI/USB/SWD connectors, controls, LEDs, and trigger/audio I/O.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.