gokul/wireless-calculator
A USB‑C rechargeable battery-powered controller board with MCP73871 Li‑ion charging, TPS63070 buck‑boost and LDO power regulation, ATmega328P and ESP32‑S3 control, LCD/keypad user interface, status LEDs, and UART/programming connectors.
- Version
- 0.0.1
- License
- ISC
- Stars
- 0
imports/MCP73871_2CCI_ML/MCP73871_2CCI_ML.tsx
import objPath from "./MCP73871_2CCI_ML.obj";
import stepPath from "./MCP73871_2CCI_ML.step";
import type { ChipProps } from "@tscircuit/props";
const pinLabels = {
pin1: ["OUT1"],
pin2: ["VPCC"],
pin3: ["SEL"],
pin4: ["PROG2"],
pin5: ["THERM"],
pin6: ["N_PG"],
pin7: ["STAT2"],
pin8: ["STAT1", "N_LBO"],
pin9: ["N_TE"],
pin10: ["VSS1"],
pin11: ["VSS2"],
pin12: ["PROG3"],
pin13: ["PROG1"],
pin14: ["VBAT1"],
pin15: ["VBAT2"],
pin16: ["VBAT_SENSE"],
pin17: ["CE"],
pin18: ["IN1"],
pin19: ["IN2"],
pin20: ["OUT2"],
pin21: ["EP"],
} as const;
const pinAttributes = {
pin18: { requiresPower: true },
pin19: { requiresPower: true },
pin1: { providesPower: true },
pin20: { providesPower: true },
pin10: { requiresGround: true },
pin11: { requiresGround: true },
} as const;
export const MCP73871_2CCI_ML = (props: ChipProps<typeof pinLabels>) => {
return (
<chip
pinLabels={pinLabels}
pinAttributes={pinAttributes}
supplierPartNumbers={{
jlcpcb: ["C5121473"],
}}
manufacturerPartNumber="MCP73871-2CCI/ML"
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="-0.999998mm"
pcbY="-1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin2"]}
pcbX="-0.499872mm"
pcbY="-1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin3"]}
pcbX="-0mm"
pcbY="-1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin4"]}
pcbX="0.500126mm"
pcbY="-1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin5"]}
pcbX="0.999998mm"
pcbY="-1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin6"]}
pcbX="1.999996mm"
pcbY="-0.999998mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin7"]}
pcbX="1.999996mm"
pcbY="-0.499872mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin8"]}
pcbX="1.999996mm"
pcbY="0mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin9"]}
pcbX="1.999996mm"
pcbY="0.500126mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin10"]}
pcbX="1.999996mm"
pcbY="0.999998mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin11"]}
pcbX="0.999998mm"
pcbY="1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin12"]}
pcbX="0.500126mm"
pcbY="1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin13"]}
pcbX="-0mm"
pcbY="1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin14"]}
pcbX="-0.499872mm"
pcbY="1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin15"]}
pcbX="-0.999998mm"
pcbY="1.999996mm"
width="0.2800096mm"
height="0.7999984mm"
shape="rect"
/>
<smtpad
portHints={["pin16"]}
pcbX="-1.999996mm"
pcbY="0.999998mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin17"]}
pcbX="-1.999996mm"
pcbY="0.500126mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin18"]}
pcbX="-1.999996mm"
pcbY="0mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin19"]}
pcbX="-1.999996mm"
pcbY="-0.499872mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin20"]}
pcbX="-1.999996mm"
pcbY="-0.999998mm"
width="0.7999984mm"
height="0.2800096mm"
shape="rect"
/>
<smtpad
portHints={["pin21"]}
pcbX="-0mm"
pcbY="0mm"
width="2.6999946mm"
height="2.6999946mm"
shape="rect"
/>
<silkscreenpath
route={[
{ x: 2.1500083999999333, y: 1.52499059999991 },
{ x: 2.1500083999999333, y: 2.1500083999999333 },
{ x: 1.52499059999991, y: 2.1500083999999333 },
]}
/>
<silkscreenpath
route={[
{ x: -1.5249906000000237, y: 2.1500083999999333 },
{ x: -2.150008400000047, y: 2.1500083999999333 },
{ x: -2.150008400000047, y: 1.52499059999991 },
]}
/>
<silkscreenpath
route={[
{ x: -1.5249906000000237, y: -2.150008400000047 },
{ x: -2.150008400000047, y: -2.150008400000047 },
{ x: -2.150008400000047, y: -1.5249906000000237 },
]}
/>
<silkscreenpath
route={[
{ x: 1.52499059999991, y: -2.150008400000047 },
{ x: 2.1500083999999333, y: -2.150008400000047 },
{ x: 2.1500083999999333, y: -1.5249906000000237 },
]}
/>
<silkscreenpath
route={[
{ x: -1.9507200000000466, y: -2.524759999999901 },
{ x: -2.099461055997722, y: -2.6754020297038323 },
{ x: -1.9494500000000698, y: -2.824779424014764 },
{ x: -1.7994389440024179, y: -2.675402029703946 },
{ x: -1.9481799999999794, y: -2.524759999999901 },
]}
/>
<silkscreentext
text="{NAME}"
pcbX="0.003302mm"
pcbY="3.393442mm"
anchorAlignment="center"
fontSize="1mm"
/>
<courtyardoutline
outline={[
{ x: -2.649995199999921, y: 2.649995200000035 },
{ x: 2.649995200000035, y: 2.649995200000035 },
{ x: 2.649995200000035, y: -2.649995200000035 },
{ x: -2.649995199999921, y: -2.649995200000035 },
{ x: -2.649995199999921, y: 2.649995200000035 },
]}
/>
</footprint>
}
cadModel={{
objUrl: objPath,
stepUrl: stepPath,
pcbRotationOffset: 90,
modelOriginPosition: { x: 0, y: 0, z: -0.02 },
}}
{...props}
/>
);
};
Related Packages
More from this authorgokul/macro-six-usbcUSB-powered ATmega32U4 controller board with protected/switched 5 V power, six tactile keys, rotary encoder, reset/boot/ISP interfaces, power LED, and six daisy-chained SK6812 RGB LEDs driven through MOSFETs.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newShiboSoftwareDev/f1c100s-linux-stepper-controllerA four-layer Linux motor-control carrier built around an Allwinner F1C100S SoC, USB‑C, SPI flash, multi-rail power regulation, DRV8825 stepper-driver stage with protection/current sensing, temperature monitoring, and external I/O connectors.