gokul/wireless-calculator
A USB‑C rechargeable battery-powered controller board with MCP73871 Li‑ion charging, TPS63070 buck‑boost and LDO power regulation, ATmega328P and ESP32‑S3 control, LCD/keypad user interface, status LEDs, and UART/programming connectors.
- Version
- 0.0.1
- License
- ISC
- Stars
- 0
imports/ATMEGA328P_AU/ATMEGA328P_AU.tsx
import objPath from "./ATMEGA328P_AU.obj";
import stepPath from "./ATMEGA328P_AU.step";
import type { ChipProps } from "@tscircuit/props";
const pinLabels = {
pin1: ["PCINT19", "OC2B", "INT1_PD3"],
pin2: ["PCINT20", "XCK", "T0_PD4"],
pin3: ["GND3"],
pin4: ["VCC2"],
pin5: ["GND2"],
pin6: ["VCC1"],
pin7: ["PCINT6", "XTAL1", "TOSC1_PB6"],
pin8: ["PCINT7", "XTAL2", "TOSC2_PB7"],
pin9: ["PCINT21", "OC0B", "T1_PD5"],
pin10: ["PCINT22", "OC0A", "AIN0_PD6"],
pin11: ["PCINT23", "AIN1_PD7"],
pin12: ["PCINT0", "CLKO", "ICP1_PB0"],
pin13: ["PCINT1", "OC1A_PB1"],
pin14: ["PCINT2", "N_SS", "OC1B_PB2"],
pin15: ["PCINT3", "OC2A", "MOSI_PB3"],
pin16: ["PCINT4", "MISO_PB4"],
pin17: ["PB5_SCK", "PCINT5"],
pin18: ["AVCC"],
pin19: ["ADC6"],
pin20: ["AREF"],
pin21: ["GND1"],
pin22: ["ADC7"],
pin23: ["PC0_ADC0", "PCINT8"],
pin24: ["PC1_ADC1", "PCINT9"],
pin25: ["PC2_ADC2", "PCINT10"],
pin26: ["PC3_ADC3", "PCINT11"],
pin27: ["PC4_ADC4", "SDA", "PCINT12"],
pin28: ["PC5_ADC5", "SCL", "PCINT13"],
pin29: ["N_PC6_RESET", "PCINT14"],
pin30: ["PD0_RXD", "PCINT16"],
pin31: ["PD1_TXD", "PCINT17"],
pin32: ["PD2_INT0", "PCINT18"],
} as const;
const pinAttributes = {
pin3: { requiresGround: true, mustBeConnected: true },
pin4: {
requiresPower: true,
mustBeConnected: true,
shouldHaveDecouplingCapacitor: true,
},
pin5: { requiresGround: true, mustBeConnected: true },
pin6: {
requiresPower: true,
mustBeConnected: true,
shouldHaveDecouplingCapacitor: true,
},
pin21: { requiresGround: true, mustBeConnected: true },
pin32: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin31: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["uart_tx"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin30: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["uart_rx"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin29: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin28: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["i2c_scl"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin27: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["i2c_sda"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin26: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin25: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin24: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin23: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin22: { isInput: true },
pin20: { isInput: true },
pin19: { isInput: true },
pin18: {
requiresPower: true,
mustBeConnected: true,
shouldHaveDecouplingCapacitor: true,
},
pin17: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["spi_sck"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin16: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["spi_miso"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin15: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["spi_mosi"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin14: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
capabilities: ["spi_cs"],
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin13: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin12: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin11: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin10: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin9: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin8: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin7: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin2: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
pin1: {
isInput: true,
isOutput: true,
isBidirectional: true,
canUseTriState: true,
canUseInternalPullup: true,
canUsePushPull: true,
isGpio: true,
},
} satisfies NonNullable<ChipProps["pinAttributes"]>;
export const ATMEGA328P_AU = (props: ChipProps<typeof pinLabels>) => {
return (
<chip
pinLabels={pinLabels}
pinAttributes={pinAttributes}
supplierPartNumbers={{
jlcpcb: ["C14877"],
}}
manufacturerPartNumber="ATMEGA328P-AU"
footprint={
<footprint>
<smtpad
portHints={["pin32"]}
pcbX="-4.3815mm"
pcbY="-2.7999944mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin31"]}
pcbX="-4.3815mm"
pcbY="-1.999996mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin30"]}
pcbX="-4.3815mm"
pcbY="-1.1999976mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin29"]}
pcbX="-4.3815mm"
pcbY="-0.3999992mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin28"]}
pcbX="-4.3815mm"
pcbY="0.3999992mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin27"]}
pcbX="-4.3815mm"
pcbY="1.1999976mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin26"]}
pcbX="-4.3815mm"
pcbY="1.999996mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin25"]}
pcbX="-4.3815mm"
pcbY="2.7999944mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin24"]}
pcbX="-2.7999944mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin23"]}
pcbX="-1.999996mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin22"]}
pcbX="-1.1999976mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin21"]}
pcbX="-0.3999992mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin20"]}
pcbX="0.3999992mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin19"]}
pcbX="1.1999976mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin18"]}
pcbX="1.999996mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin17"]}
pcbX="2.7999944mm"
pcbY="4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin16"]}
pcbX="4.3815mm"
pcbY="2.7999944mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin15"]}
pcbX="4.3815mm"
pcbY="1.999996mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin14"]}
pcbX="4.3815mm"
pcbY="1.1999976mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin13"]}
pcbX="4.3815mm"
pcbY="0.3999992mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin12"]}
pcbX="4.3815mm"
pcbY="-0.3999992mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin11"]}
pcbX="4.3815mm"
pcbY="-1.1999976mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin10"]}
pcbX="4.3815mm"
pcbY="-1.999996mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin9"]}
pcbX="4.3815mm"
pcbY="-2.7999944mm"
width="1.6500094mm"
height="0.4500118mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin8"]}
pcbX="2.7999944mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin7"]}
pcbX="1.999996mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin6"]}
pcbX="1.1999976mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin5"]}
pcbX="0.3999992mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin4"]}
pcbX="-0.3999992mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin3"]}
pcbX="-1.1999976mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin2"]}
pcbX="-1.999996mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<smtpad
portHints={["pin1"]}
pcbX="-2.7999944mm"
pcbY="-4.3688mm"
width="0.4500118mm"
height="1.6500094mm"
radius="0.2250059mm"
shape="pill"
/>
<silkscreenpath
route={[
{ x: -2.967482000000004, y: -4.825999999999993 },
{ x: -2.819400000000016, y: -4.677917989294684 },
{ x: -2.6713180000000136, y: -4.825999999999993 },
]}
/>
<silkscreenpath
route={[
{ x: -2.6713180000000136, y: -4.825999999999993 },
{ x: -2.819400000000016, y: -4.9740820107053025 },
{ x: -2.967482000000004, y: -4.825999999999993 },
]}
/>
<silkscreenpath
route={[
{ x: -2.9626559999999813, y: 2.9499560000000145 },
{ x: -2.9626559999999813, y: -2.949955999999986 },
{ x: 2.937256000000019, y: -2.949955999999986 },
{ x: 2.937256000000019, y: 2.9499560000000145 },
{ x: -2.9626559999999813, y: 2.9499560000000145 },
]}
/>
<silkscreenpath
route={[
{ x: -3.7591999999999928, y: -4.063999999999993 },
{ x: -3.907941055997668, y: -4.214642029703938 },
{ x: -3.7579300000000018, y: -4.364019424014728 },
{ x: -3.6079189440023356, y: -4.214642029703938 },
{ x: -3.7566599999999966, y: -4.063999999999993 },
]}
/>
<silkscreenpath
route={[
{ x: -2.2123399999999975, y: -1.998980000000003 },
{ x: -2.4015150142161303, y: -2.137897449194128 },
{ x: -2.3284212288967012, y: -2.3609278108984313 },
{ x: -2.0937187711032834, y: -2.3609278108984313 },
{ x: -2.0206249857838543, y: -2.137897449194128 },
{ x: -2.209799999999987, y: -1.998980000000003 },
]}
/>
<silkscreentext
text="{NAME}"
pcbX="0mm"
pcbY="5.9657mm"
anchorAlignment="center"
fontSize="1mm"
/>
<courtyardoutline
outline={[
{ x: -5.456504699999996, y: 5.443804700000001 },
{ x: 5.456504699999996, y: 5.443804700000001 },
{ x: 5.456504699999996, y: -5.443804699999987 },
{ x: -5.456504699999996, y: -5.443804699999987 },
{ x: -5.456504699999996, y: 5.443804700000001 },
]}
/>
</footprint>
}
cadModel={{
objUrl: objPath,
stepUrl: stepPath,
pcbRotationOffset: 90,
modelOriginPosition: {
x: -0.0012984000000164642,
y: -0.0030292999999934622,
z: 0.000917,
},
}}
{...props}
/>
);
};
Related Packages
More from this authorgokul/macro-six-usbcUSB-powered ATmega32U4 controller board with protected/switched 5 V power, six tactile keys, rotary encoder, reset/boot/ISP interfaces, power LED, and six daisy-chained SK6812 RGB LEDs driven through MOSFETs.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newShiboSoftwareDev/f1c100s-linux-stepper-controllerA four-layer Linux motor-control carrier built around an Allwinner F1C100S SoC, USB‑C, SPI flash, multi-rail power regulation, DRV8825 stepper-driver stage with protection/current sensing, temperature monitoring, and external I/O connectors.