gokul/usb3-sd-hub
Engineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
- Version
- 0.1.5
- License
- MIT
- Stars
- 0
Files in (root)/design
- CompactPairRouter.ts
- connections.ts
- connector-models.ts
- downstream-four.ts
- downstream-one-receive.ts
- downstream-one-transmit.ts
- guided-usb-routes.ts
- local-solvers.ts
- paired-paths.ts
- part-selection.ts
- passive-models.ts
- pcb-position-compatibility.ts
- pinouts.ts
- placement.ts
- plated-hole-paste-policy.ts
- schematic-group-compatibility.ts
- schematic-note-layout.ts
- schematic-sheet-layout.ts
Related Packages
More from this authorgokul/musegrowUSB‑C powered ESP32‑C3 controller board with regulated 3.3 V supply, USB ESD protection, buttons/status LEDs, ambient-light I²C sensing, and a 555-driven capacitive soil-moisture electrode.
Similar packagepixalynx/usb3-hub-10gA USB 3.2 Gen 2 six-port hub board with USB-C PD power input, regulated 5 V/3.3 V/1.15 V rails, one upstream and four protected downstream USB-A/USB-C ports, SuperSpeed muxes, ESD protection, and controlled port power.
Discover something newolivergrabinski/tscircuit-weatherA 60×44 mm ESP32-S3 Wi‑Fi/BLE weather-station PCB with USB‑C power, 3.3 V regulation and ESD protection, temperature/humidity and UV/light sensors, status LEDs, buttons, Qwiic I²C expansion, debug GPIO header, and a printable enclosure.