gokul/usb3-sd-hub

Engineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.

Version
0.1.5
License
MIT
Stars
0

verification/issues/UsbA-generated-unmodified.tsx

PCBPCB preview for verification/issues/UsbA-generated-unmodified.tsx
SchematicSchematic preview for verification/issues/UsbA-generated-unmodified.tsx
import { type ChipProps } from "tscircuit"
export const UsbAReceptacle = (props: ChipProps) => (
  <chip
    footprint={<footprint>
        <platedhole  portHints={["1"]} pcbX="0mm" pcbY="0mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["2"]} pcbX="2.5mm" pcbY="0mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["3"]} pcbX="4.5mm" pcbY="0mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["4"]} pcbX="7mm" pcbY="0mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["5"]} pcbX="7.5mm" pcbY="1.5mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["6"]} pcbX="5.5mm" pcbY="1.5mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["7"]} pcbX="3.5mm" pcbY="1.5mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["8"]} pcbX="1.5mm" pcbY="1.5mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["9"]} pcbX="-0.5mm" pcbY="1.5mm" outerDiameter="1.2mm" holeDiameter="0.7mm" shape="circle" />
<platedhole  portHints={["10"]} pcbX="9.9mm" pcbY="0.75mm" outerHeight="2.4mm" outerWidth="1.2mm" holeHeight="1.7mm" holeWidth="0.6mm" height="1.7mm" shape="pill" pcbRotation="0deg" />
<platedhole  portHints={["10"]} pcbX="-2.9mm" pcbY="0.75mm" outerHeight="2.4mm" outerWidth="1.2mm" holeHeight="1.7mm" holeWidth="0.6mm" height="1.7mm" shape="pill" pcbRotation="0deg" />
<platedhole  portHints={["10"]} pcbX="9.9mm" pcbY="-7.75mm" outerHeight="2.1mm" outerWidth="1.2mm" holeHeight="1.4mm" holeWidth="0.6mm" height="1.4mm" shape="pill" pcbRotation="0deg" />
<platedhole  portHints={["10"]} pcbX="-2.9mm" pcbY="-7.75mm" outerHeight="2.1mm" outerWidth="1.2mm" holeHeight="1.4mm" holeWidth="0.6mm" height="1.4mm" shape="pill" pcbRotation="0deg" />
<silkscreenpath route={[{"x":-3.46,"y":2.56},{"x":-3.46,"y":1.85}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":10.46,"y":2.56},{"x":10.46,"y":1.85}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":-3.46,"y":2.56},{"x":10.46,"y":2.56}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":10.46,"y":-6.8},{"x":10.46,"y":-0.35}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":-3.46,"y":-6.8},{"x":-3.46,"y":-0.35}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":-3.46,"y":-11.81},{"x":-3.46,"y":-8.7}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":10.46,"y":-11.81},{"x":10.46,"y":-8.7}]} strokeWidth={0.12} />
<silkscreenpath route={[{"x":-3.46,"y":-11.81},{"x":10.46,"y":-11.81}]} strokeWidth={0.12} />
<fabricationnotepath route={[{"x":-3.4,"y":-11.75},{"x":-3.4,"y":2.5}]} strokeWidth={0.1} />
<fabricationnotepath route={[{"x":10.4,"y":2.5},{"x":10.4,"y":-11.75}]} strokeWidth={0.1} />
<fabricationnotepath route={[{"x":10.4,"y":-11.75},{"x":-3.4,"y":-11.75}]} strokeWidth={0.1} />
<fabricationnotepath route={[{"x":-3.4,"y":2.5},{"x":10.4,"y":2.5}]} strokeWidth={0.1} />
<fabricationnotetext pcbX={3.5} pcbY={-13} anchorAlignment="center" text="USB3_A_Molex_48393-001" font="tscircuit2024" fontSize={1} />
<fabricationnotetext pcbX={3.5} pcbY={-5} anchorAlignment="center" text="%R" font="tscircuit2024" fontSize={1} />
<silkscreentext pcbX={3.5} pcbY={3.6} anchorAlignment="center" fontSize={1} font="tscircuit2024" layer="top" text="REF**" />
<courtyardoutline outline={[{"x":-4,"y":-12.3},{"x":-4,"y":3}]} layer="top" />
<courtyardoutline outline={[{"x":11,"y":-12.3},{"x":-4,"y":-12.3}]} layer="top" />
<courtyardoutline outline={[{"x":11,"y":3},{"x":11,"y":-12.3}]} layer="top" />
<courtyardoutline outline={[{"x":-4,"y":3},{"x":11,"y":3}]} layer="top" />
      </footprint>}
    {...props}
  />
)