gokul/usb-hub-board

A 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.

Version
1.0.6
License
unset
Stars
1

imports/USBLC6_2SC6.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["IO1_PORT"],
  pin2: ["GND"],
  pin3: ["IO2_PORT"],
  pin4: ["IO2_IC"],
  pin5: ["VBUS"],
  pin6: ["IO1_IC"]
} as const

const pinAttributes = {
  pin2: {requiresGround: true}
} as const

export const USBLC6_2SC6 = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C2687116"
  ]
}}
      manufacturerPartNumber="USBLC6-2SC6"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-0.94996mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.94996mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.94996mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="-0.94996mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<silkscreenpath route={[{"x":1.5391891999998961,"y":-0.8892031999998835},{"x":1.5391891999998961,"y":0.8892031999999972}]} />
<silkscreenpath route={[{"x":-1.5391892000000098,"y":-0.8892031999998835},{"x":-1.5391892000000098,"y":0.8892031999999972}]} />
<silkscreencircle pcbX="-1.668272mm" pcbY="-1.301496mm" radius="0.150114mm" />
<silkscreentext text="{NAME}" pcbX="-0.1524mm" pcbY="2.6764mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.078800000000001,"y":1.9264000000000578},{"x":1.7739999999998872,"y":1.9264000000000578},{"x":1.7739999999998872,"y":-2.0279999999999063},{"x":-2.078800000000001,"y":-2.0279999999999063},{"x":-2.078800000000001,"y":1.9264000000000578}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2687116.obj?uuid=229b69761e2c45dba6a83d8866dec72d",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2687116.step?uuid=229b69761e2c45dba6a83d8866dec72d",
        pcbRotationOffset: 90,
        modelOriginPosition: { x: -0.000012700000070253736, y: 0.000012700000070253736, z: -0.048939 },
      }}
      {...props}
    />
  )
}