anil08607/Smartwatch
A 46 mm smartwatch PCB built around an nRF52810 BLE MCU, with USB‑C PD/Li‑ion charging, buck‑boost power, LCD, accelerometer, RTC, buttons, haptic motor, crystals, antenna, and SWD programming connector.
- Version
- 1.0.14
- License
- unset
- Stars
- 0
release/drill/report.txt
Drill report for smartwatch-nrf52810.kicad_pcb
Created on 2026-10-15T19:46:36
Copper Layer Stackup:
=============================================================
L1 : F.Cu front
L2 : In1.Cu in1
L3 : In2.Cu in2
L4 : B.Cu back
Drill file 'smartwatch-nrf52810-PTH.drl' contains
plated through holes:
=============================================================
T1 0.200mm 0.0079" (99 holes))
T2 0.600mm 0.0236" (4 holes) (with 4 slots)
Total plated holes count 103
Drill file 'smartwatch-nrf52810-NPTH.drl' contains
unplated through holes:
=============================================================
T1 0.650mm 0.0256" (2 holes))
T2 0.750mm 0.0295" (4 holes))
Total unplated holes count 6
Related Packages
More from this authoranil08607/issue1This code defines a schematic diagram of a DS3231MZ real-time clock (RTC) integrated circuit connected to a 3.3V power supply, I2C data lines, and control signals on a PCB.
Similar packageabse/rp2350-mcu-boardThis code defines a compact, four-layer PCB hardware layout for the Raspberry Pi RP2350A microcontroller module, including the main IC, power regulation, USB-C connector, STM32-compatible headers, and associated passive components, with detailed component footprints, net connections, and copper pour zones for powering and ground references.
Discover something newgokul/usb-hub-boardA 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.