abse/rp2350-mcu-board

This code defines a compact, four-layer PCB hardware layout for the Raspberry Pi RP2350A microcontroller module, including the main IC, power regulation, USB-C connector, STM32-compatible headers, and associated passive components, with detailed component footprints, net connections, and copper pour zones for powering and ground references.

Version
0.0.11
License
unset
Stars
0

imports/SN74AHCT1G125DBVR.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["OE"],
  pin2: ["A"],
  pin3: ["GND"],
  pin4: ["Y"],
  pin5: ["VCC"]
} as const

export const SN74AHCT1G125DBVR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      supplierPartNumbers={{
  "jlcpcb": [
    "C7484"
  ]
}}
      manufacturerPartNumber="SN74AHCT1G125DBVR"
      pinAttributes={{
        pin1: { mustBeConnected: true },
        pin2: { mustBeConnected: true },
        pin3: { requiresGround: true, mustBeConnected: true },
        pin4: {
          canUsePushPull: true,
          isUsingPushPull: true,
          mustBeConnected: true,
        },
        pin5: {
          requiresPower: true,
          requiresVoltage: "5V",
          mustBeConnected: true,
        },
      }}
      footprint={<footprint>
        <smtpad portHints={["pin5"]} pcbX="-1.300099mm" pcbY="-0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="-1.300099mm" pcbY="0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="1.300099mm" pcbY="0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="1.300099mm" pcbY="-0mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="1.300099mm" pcbY="-0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<silkscreenpath route={[{"x":0.8999728000000005,"y":-1.404111999999941},{"x":0.8999728000000005,"y":-1.5500604000000067}]} />
<silkscreenpath route={[{"x":0.8999728000000005,"y":-0.45412660000010874},{"x":0.8999728000000005,"y":-0.4958079999998972}]} />
<silkscreenpath route={[{"x":0.8999728000000005,"y":0.4958079999998972},{"x":0.8999728000000005,"y":0.45415200000002187}]} />
<silkscreenpath route={[{"x":0.8999728000000005,"y":1.5499587999998994},{"x":0.8999728000000005,"y":1.404111999999941}]} />
<silkscreenpath route={[{"x":-0.9000489999999672,"y":-1.404111999999941},{"x":-0.9000489999999672,"y":-1.5500604000000067}]} />
<silkscreenpath route={[{"x":-0.9000489999999672,"y":0.4958079999998972},{"x":-0.9000489999999672,"y":-0.4958334000000377}]} />
<silkscreenpath route={[{"x":-0.9000489999999672,"y":1.5499587999998994},{"x":-0.9000489999999672,"y":1.4040866000000278}]} />
<silkscreenpath route={[{"x":-0.9000489999999672,"y":1.5499587999998994},{"x":0.8999728000000005,"y":1.5499587999998994}]} />
<silkscreenpath route={[{"x":-0.9000489999999672,"y":-1.5500604000000067},{"x":0.8999728000000005,"y":-1.5500604000000067}]} />
<silkscreentext text="{NAME}" pcbX="0.012319mm" pcbY="2.562354mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.091880999999944,"y":1.8123540000000276},{"x":2.1165190000000393,"y":1.8123540000000276},{"x":2.1165190000000393,"y":-1.786446000000069},{"x":-2.091880999999944,"y":-1.786446000000069},{"x":-2.091880999999944,"y":1.8123540000000276}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C7484.obj?uuid=460193f9bf2d42e58cf3c2f675b07dc6",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C7484.step?uuid=460193f9bf2d42e58cf3c2f675b07dc6",
        pcbRotationOffset: 180,
        modelOriginPosition: { x: 0, y: -0.000012700000070253736, z: -0.049083 },
      }}
      {...props}
    />
  )
}