abse/gameboy-advance
Validates and exports a four-layer Game Boy–style PCB assembly with RP2350 MCU, 32MB flash, USB-C, LCD and speaker connectors, battery buck-boost power, buttons, and verified routing, connectivity, clearances, CAD models, and physical DRC.
- Version
- 0.0.39
- License
- unset
- Stars
- 0
schematic-layout.tsx
import { createElement } from "react";
import type { SchematicSheetProps, SchematicTextProps } from "@tscircuit/props";
const SchematicSheet = (props: SchematicSheetProps) =>
createElement("schematicsheet", props);
const SchematicText = (props: SchematicTextProps) =>
createElement("schematictext", props);
// Schematic-only organization. Coordinates use schematic world mm: +X right, +Y up.
// These notes and sheets create no source components or PCB copper.
const sheets = [
{
name: "processor",
title: "Processor, Clock and Debug",
},
{
name: "core-power",
title: "RP2350 Core Regulator and Bypass",
},
{
name: "usb",
title: "USB Data and Power Detection",
},
{
name: "battery",
title: "AA Protection and 5V Converter",
},
{
name: "rails",
title: "USB Isolation and 3V2 Supply",
},
{
name: "flash",
title: "QSPI Firmware Flash",
},
{
name: "psram",
title: "QSPI Working RAM",
},
{
name: "storage",
title: "microSD Game Storage",
},
{
name: "audio",
title: "PWM Audio and Speaker",
},
{
name: "display",
title: "Display, Touch and Backlight",
},
{
name: "controls",
title: "Game Controls",
},
] as const;
const notes = [
{
name: "U1",
sheet: "processor",
x: 0,
y: 2,
noteX: -0.816,
noteY: 6.536,
label: "U1: \nRuns console\nMemory / USB / LCD /\ncontrols",
role: "Runs console",
connection: "Memory / USB / LCD / controls",
},
{
name: "U_XTAL",
sheet: "processor",
x: -10,
y: 5,
noteX: -12.697,
noteY: 5.951,
label: "U_XTAL: \nSets system clock\nU1 XIN / XOUT",
role: "Sets system clock",
connection: "U1 XIN / XOUT",
},
{
name: "U_BOOTSEL",
sheet: "processor",
x: 11,
y: 0,
noteX: 10.051,
noteY: 1.652,
label: "U_BOOTSEL: \nSelects USB boot\nFlash CS / ground",
role: "Selects USB boot",
connection: "Flash CS / ground",
},
{
name: "U_RUN",
sheet: "processor",
x: 11,
y: 5,
noteX: 10.107,
noteY: 6.652,
label: "U_RUN: \nResets processor\nU1 RUN / ground",
role: "Resets processor",
connection: "U1 RUN / ground",
},
{
name: "U_CORE_INDUCTOR",
sheet: "core-power",
x: 0,
y: 5,
noteX: -1.06,
noteY: 4.37,
label: "U_CORE_INDUCTOR: \nConverts core power\nU1 LX / DVDD",
role: "Converts core power",
connection: "U1 LX / DVDD",
},
{
name: "R_VREG_AVDD",
sheet: "core-power",
x: -7,
y: 1,
noteX: -6.15,
noteY: 1.051,
label: "R_VREG_AVDD: \nFilters analog rail\n3V2 / U1 VREG_AVDD",
role: "Filters analog rail",
connection: "3V2 / U1 VREG_AVDD",
rotation: -90,
},
{
name: "R_RUN",
sheet: "processor",
x: 8,
y: 5,
noteX: 7.107,
noteY: 6.652,
label: "R_RUN: \nHolds reset high\n3V2 / U1 RUN",
role: "Holds reset high",
connection: "3V2 / U1 RUN",
rotation: 90,
},
{
name: "C_VREG_IN",
sheet: "core-power",
x: -10,
y: 5,
noteX: -11.116,
noteY: 4.05,
label: "C_VREG_IN: \nBypasses core input\nU1 VREG_VIN / ground",
role: "Bypasses core input",
connection: "U1 VREG_VIN / ground",
},
{
name: "C_CORE",
sheet: "core-power",
x: -3,
y: -3,
noteX: -4.06,
noteY: -3.95,
label: "C_CORE: \nSmooths core output\nDVDD / U1 VREG_PGND",
role: "Smooths core output",
connection: "DVDD / U1 VREG_PGND",
},
{
name: "C_VREG_AVDD",
sheet: "core-power",
x: -7,
y: -3,
noteX: -6.15,
noteY: -2.532,
label: "C_VREG_AVDD: \nBypasses analog rail\nU1 VREG_AVDD /\nground",
role: "Bypasses analog rail",
connection: "U1 VREG_AVDD / ground",
},
{
name: "C_QSPI_USB",
sheet: "processor",
x: -7,
y: -3,
noteX: -10.082,
noteY: -2.649,
label: "C_QSPI_USB: \nBypasses IO supply\nU1 QSPI / USB supply",
role: "Bypasses IO supply",
connection: "U1 QSPI / USB supply",
},
{
name: "C_ADC",
sheet: "processor",
x: -5.2,
y: -3,
noteX: -6.016,
noteY: -3.95,
label: "C_ADC: \nBypasses ADC supply\nU1 ADC_AVDD / ground",
role: "Bypasses ADC supply",
connection: "U1 ADC_AVDD / ground",
},
{
name: "C_XIN",
sheet: "processor",
x: -11,
y: 1,
noteX: -10.15,
noteY: 1.351,
label: "C_XIN: \nLoads crystal input\nU1 XIN / ground",
role: "Loads crystal input",
connection: "U1 XIN / ground",
},
{
name: "C_XOUT",
sheet: "processor",
x: -9.2,
y: 1,
noteX: -10.082,
noteY: 3.468,
label: "C_XOUT: \nLoads crystal output\nCrystal XOUT /\nground",
role: "Loads crystal output",
connection: "Crystal XOUT / ground",
},
{
name: "R_XOUT",
sheet: "processor",
x: -7,
y: 5,
noteX: -8.06,
noteY: 6.427,
label: "R_XOUT: \nDamps crystal drive\nU1 XOUT / crystal",
role: "Damps crystal drive",
connection: "U1 XOUT / crystal",
},
{
name: "R_BOOTSEL",
sheet: "processor",
x: 8,
y: 0,
noteX: 6.996,
noteY: 1.895,
label: "R_BOOTSEL: \nLimits boot-switch\nload\nFlash CS / boot\nswitch",
role: "Limits boot-switch load",
connection: "Flash CS / boot switch",
},
{
name: "TP_SWDIO",
sheet: "processor",
x: 9,
y: -1,
noteX: 9.562,
noteY: -1.249,
label: "TP_SWDIO: \nDebug data access\nU1 SWDIO",
role: "Debug data access",
connection: "U1 SWDIO",
},
{
name: "TP_SWCLK",
sheet: "processor",
x: 9,
y: -2.4,
noteX: 6.429,
noteY: -1.449,
label: "TP_SWCLK: \nDebug clock access\nU1 SWCLK",
role: "Debug clock access",
connection: "U1 SWCLK",
},
{
name: "TP_GND",
sheet: "processor",
x: 13,
y: -2.4,
noteX: 13.562,
noteY: -1.932,
label: "TP_GND: \nDebug ground\nreference\nGround plane",
role: "Debug ground reference",
connection: "Ground plane",
},
{
name: "TP_3V3",
sheet: "processor",
x: 13,
y: -1,
noteX: 13.562,
noteY: -0.649,
label: "TP_3V3: \nMeasure logic supply\n3V2 rail",
role: "Measure logic supply",
connection: "3V2 rail",
},
{
name: "C_IOVDD6",
sheet: "processor",
x: -3.4,
y: -3,
noteX: -4.104,
noteY: -1.348,
label: "C_IOVDD6: \nBypasses IO rail\nU1 IOVDD6 / ground",
role: "Bypasses IO rail",
connection: "U1 IOVDD6 / ground",
},
{
name: "C_IOVDD5",
sheet: "processor",
x: -1.5999999999999996,
y: -3,
noteX: -2.904,
noteY: -3.95,
label: "C_IOVDD5: \nBypasses IO rail\nU1 IOVDD5 / ground",
role: "Bypasses IO rail",
connection: "U1 IOVDD5 / ground",
},
{
name: "C_IOVDD4",
sheet: "processor",
x: 0.20000000000000018,
y: -3,
noteX: -0.504,
noteY: -4.2,
label: "C_IOVDD4: \nBypasses IO rail\nU1 IOVDD4 / ground",
role: "Bypasses IO rail",
connection: "U1 IOVDD4 / ground",
},
{
name: "C_IOVDD3",
sheet: "processor",
x: 2,
y: -3,
noteX: 1.996,
noteY: -3.95,
label: "C_IOVDD3: \nBypasses IO rail\nU1 IOVDD3 / ground",
role: "Bypasses IO rail",
connection: "U1 IOVDD3 / ground",
},
{
name: "C_IOVDD2",
sheet: "processor",
x: 3.8000000000000007,
y: -3,
noteX: 3.096,
noteY: -1.348,
label: "C_IOVDD2: \nBypasses IO rail\nU1 IOVDD2 / ground",
role: "Bypasses IO rail",
connection: "U1 IOVDD2 / ground",
},
{
name: "C_IOVDD1",
sheet: "processor",
x: 5.6,
y: -3,
noteX: 6.45,
noteY: -2.649,
label: "C_IOVDD1: \nBypasses IO rail\nU1 IOVDD1 / ground",
role: "Bypasses IO rail",
connection: "U1 IOVDD1 / ground",
},
{
name: "C_DVDD3",
sheet: "core-power",
x: -1.2,
y: -3,
noteX: -2.204,
noteY: -1.098,
label: "C_DVDD3: \nBypasses core rail\nU1 DVDD3 / ground",
role: "Bypasses core rail",
connection: "U1 DVDD3 / ground",
},
{
name: "C_DVDD2",
sheet: "core-power",
x: 0.6,
y: -3,
noteX: -0.404,
noteY: -3.95,
label: "C_DVDD2: \nBypasses core rail\nU1 DVDD2 / ground",
role: "Bypasses core rail",
connection: "U1 DVDD2 / ground",
},
{
name: "C_DVDD2_BULK",
sheet: "core-power",
x: 2.4,
y: -3,
noteX: 1.451,
noteY: -1.348,
label: "C_DVDD2_BULK: \nBuffers core rail\nU1 DVDD2 / ground",
role: "Buffers core rail",
connection: "U1 DVDD2 / ground",
},
{
name: "C_DVDD1",
sheet: "core-power",
x: 4.2,
y: -3,
noteX: 5.05,
noteY: -2.649,
label: "C_DVDD1: \nBypasses core rail\nU1 DVDD1 / ground",
role: "Bypasses core rail",
connection: "U1 DVDD1 / ground",
},
{
name: "J_USB",
sheet: "usb",
x: -8,
y: 6,
noteX: -9.004,
noteY: 4.45,
label: "J_USB: \nUSB data and power\nU1 USB / VBUS /\nground",
role: "USB data and power",
connection: "U1 USB / VBUS / ground",
},
{
name: "R_CC1",
sheet: "usb",
x: -12,
y: 3,
noteX: -14.97,
noteY: 3.351,
label: "R_CC1: \nAdvertises USB sink\nJ_USB CC1 / ground",
role: "Advertises USB sink",
connection: "J_USB CC1 / ground",
rotation: -90,
},
{
name: "R_CC2",
sheet: "usb",
x: -10,
y: 3,
noteX: -9.15,
noteY: 3.351,
label: "R_CC2: \nAdvertises USB sink\nJ_USB CC2 / ground",
role: "Advertises USB sink",
connection: "J_USB CC2 / ground",
rotation: -90,
},
{
name: "R_USB_DM",
sheet: "usb",
x: -3,
y: 6,
noteX: -4.116,
noteY: 7.427,
label: "R_USB_DM: \nDamps USB data\nJ_USB D- / U1 USB_DM",
role: "Damps USB data",
connection: "J_USB D- / U1 USB_DM",
},
{
name: "R_USB_DP",
sheet: "usb",
x: -3,
y: 3,
noteX: -4.116,
noteY: 2.275,
label: "R_USB_DP: \nDamps USB data\nJ_USB D+ / U1 USB_DP",
role: "Damps USB data",
connection: "J_USB D+ / U1 USB_DP",
},
{
name: "C_VBUS",
sheet: "usb",
x: -7,
y: -3,
noteX: -9.747,
noteY: -2.649,
label: "C_VBUS: \nSmooths USB input\nVBUS / ground",
role: "Smooths USB input",
connection: "VBUS / ground",
},
{
name: "U_USB_VALID",
sheet: "usb",
x: 1,
y: -2,
noteX: -0.116,
noteY: -2.95,
label: "U_USB_VALID: \nDetects valid USB\npower\nVBUS / boost-disable\ntransistor",
role: "Detects valid USB power",
connection: "VBUS / boost-disable transistor",
width: 2.1,
},
{
name: "C_USB_VALID",
sheet: "usb",
x: -5.2,
y: -3,
noteX: -4.35,
noteY: -2.415,
label: "C_USB_VALID: \nBypasses USB\ndetector\nDetector VDD /\nground",
role: "Bypasses USB detector",
connection: "Detector VDD / ground",
},
{
name: "R_USB_BOOST_OFF",
sheet: "usb",
x: 5,
y: -2,
noteX: 3.94,
noteY: -2.95,
label: "R_USB_BOOST_OFF: \nLimits disable base\ncurrent\nUSB detector /\ntransistor",
role: "Limits disable base current",
connection: "USB detector / transistor",
rotation: 90,
},
{
name: "Q_USB_BOOST_OFF",
sheet: "usb",
x: 9,
y: -3,
noteX: 8.051,
noteY: -3.95,
label: "Q_USB_BOOST_OFF: \nDisables boost on\nUSB\nUSB valid /\nconverter EN",
role: "Disables boost on USB",
connection: "USB valid / converter EN",
},
{
name: "R_USB_BOOST_OFF_PULLDOWN",
sheet: "usb",
x: 6,
y: -6,
noteX: 4.549,
noteY: -6.95,
label: "R_USB_BOOST_OFF_PULLDOWN: \nKeeps disable\ninactive\nDisable base /\nground",
role: "Keeps disable inactive",
connection: "Disable base / ground",
rotation: -90,
},
{
name: "J_BAT",
sheet: "battery",
x: -14,
y: 7,
noteX: -16.786,
noteY: 7.468,
label: "J_BAT: \nConnects AA pack\nFuse / battery\nground",
role: "Connects AA pack",
connection: "Fuse / battery ground",
rotation: -90,
pinArrangement: {
topSide: ["pin1"],
bottomSide: ["pin2"],
},
},
{
name: "F_BAT",
sheet: "battery",
x: -12.86,
y: 7,
noteX: -12.976,
noteY: 6.52,
label: "F_BAT: \nLimits fault current\nAA pack / reverse\nFET",
role: "Limits fault current",
connection: "AA pack / reverse FET",
},
{
name: "Q_BAT_REVERSE",
sheet: "battery",
x: -7.89,
y: 7,
noteX: -9.006,
noteY: 8.886,
label: "Q_BAT_REVERSE: \nBlocks reversed pack\nFuse / protected\nbattery",
role: "Blocks reversed pack",
connection: "Fuse / protected battery",
},
{
name: "R_BAT_REVERSE_GATE",
sheet: "battery",
x: -10,
y: 3,
noteX: -9.15,
noteY: 3.585,
label: "R_BAT_REVERSE_GATE: \nBiases protection\nFET\nReverse FET gate /\nground",
role: "Biases protection FET",
connection: "Reverse FET gate / ground",
rotation: -90,
},
{
name: "U_BAT_BUCKBOOST",
sheet: "battery",
x: 2.9,
y: 1,
noteX: 1.784,
noteY: 3.386,
label: "U_BAT_BUCKBOOST: \nRegulates pack to 5V\nProtected AA /\nBAT_5V",
role: "Regulates pack to 5V",
connection: "Protected AA / BAT_5V",
pinSpacing: 0.35,
},
{
name: "L_BAT_BUCKBOOST",
sheet: "battery",
x: 6.31,
y: 0.2,
noteX: 5.194,
noteY: -0.728,
label: "L_BAT_BUCKBOOST: \nTransfers converter\nenergy\nU_BAT_BUCKBOOST L1 /\nL2",
role: "Transfers converter energy",
connection: "U_BAT_BUCKBOOST L1 / L2",
rotation: 0,
orientation: "vertical",
},
{
name: "C_BAT_IN_LOCAL",
sheet: "battery",
x: 7,
y: -3,
noteX: 4.03,
noteY: -2.532,
label: "C_BAT_IN_LOCAL: \nBypasses pack input\nConverter VIN /\nground",
role: "Bypasses pack input",
connection: "Converter VIN / ground",
},
{
name: "C_BAT_IN_BULK_A",
sheet: "battery",
x: 8.8,
y: -3,
noteX: 7.796,
noteY: -3.95,
label: "C_BAT_IN_BULK_A: \nBuffers pack input\nConverter VIN /\nground",
role: "Buffers pack input",
connection: "Converter VIN / ground",
},
{
name: "C_BAT_IN_BULK_B",
sheet: "battery",
x: 10.6,
y: -3,
noteX: 11.45,
noteY: -2.532,
label: "C_BAT_IN_BULK_B: \nBuffers pack input\nConverter VIN /\nground",
role: "Buffers pack input",
connection: "Converter VIN / ground",
},
{
name: "C_BAT_OUT_LOCAL",
sheet: "battery",
x: -9,
y: -3,
noteX: -11.747,
noteY: -2.532,
label: "C_BAT_OUT_LOCAL: \nSmooths 5V output\nConverter VOUT /\nground",
role: "Smooths 5V output",
connection: "Converter VOUT / ground",
},
{
name: "C_BAT_OUT_BULK_A",
sheet: "battery",
x: -7.2,
y: -3,
noteX: -8.204,
noteY: -3.95,
label: "C_BAT_OUT_BULK_A: \nBuffers 5V output\nConverter VOUT /\nground",
role: "Buffers 5V output",
connection: "Converter VOUT / ground",
},
{
name: "C_BAT_OUT_BULK_B",
sheet: "battery",
x: -5.4,
y: -3,
noteX: -5.804,
noteY: -3.95,
label: "C_BAT_OUT_BULK_B: \nBuffers 5V output\nConverter VOUT /\nground",
role: "Buffers 5V output",
connection: "Converter VOUT / ground",
},
{
name: "C_BAT_OUT_BULK_C",
sheet: "battery",
x: -3.6,
y: -3,
noteX: -3.604,
noteY: -3.95,
label: "C_BAT_OUT_BULK_C: \nBuffers 5V output\nConverter VOUT /\nground",
role: "Buffers 5V output",
connection: "Converter VOUT / ground",
},
{
name: "C_BAT_VAUX",
sheet: "battery",
x: -1.3,
y: 2,
noteX: -1.704,
noteY: 4.12,
label: "C_BAT_VAUX: \nBypasses auxiliary\nrail\nConverter VAUX /\nground",
role: "Bypasses auxiliary rail",
connection: "Converter VAUX / ground",
},
{
name: "R_BAT_FB_TOP",
sheet: "battery",
x: -1,
y: -2,
noteX: -0.15,
noteY: -1.532,
label: "R_BAT_FB_TOP: \nSets 5V feedback\nBAT_5V / converter\nFB",
role: "Sets 5V feedback",
connection: "BAT_5V / converter FB",
rotation: -90,
},
{
name: "R_BAT_FB_BOTTOM",
sheet: "battery",
x: -1,
y: -6,
noteX: -0.15,
noteY: -5.415,
label: "R_BAT_FB_BOTTOM: \nReturns feedback\ndivider\nConverter FB /\nground",
role: "Returns feedback divider",
connection: "Converter FB / ground",
rotation: -90,
},
{
name: "R_BAT_MODE",
sheet: "battery",
x: -2.5,
y: 4,
noteX: -5.136,
noteY: 4.885,
label: "R_BAT_MODE: \nBiases converter\nmode\nConverter VIN /\nPS_SYNC",
role: "Biases converter mode",
connection: "Converter VIN / PS_SYNC",
rotation: -90,
},
{
name: "R_BAT_EN_TOP",
sheet: "battery",
x: 9,
y: 4,
noteX: 9.85,
noteY: 4.468,
label: "R_BAT_EN_TOP: \nSets pack cutoff\nSwitched pack /\nconverter EN",
role: "Sets pack cutoff",
connection: "Switched pack / converter EN",
rotation: -90,
},
{
name: "R_BAT_EN_BOTTOM",
sheet: "battery",
x: 9,
y: 0,
noteX: 9.85,
noteY: -0.015,
label: "R_BAT_EN_BOTTOM: \nSelects 3/4-AA\ncutoff\nConverter EN /\nground",
role: "Selects 3/4-AA cutoff",
connection: "Converter EN / ground",
rotation: -90,
},
{
name: "D_BAT_POWER",
sheet: "battery",
x: -4,
y: 3,
noteX: -4.593,
noteY: 2.33,
label: "D_BAT_POWER: \nIsolates battery\nsource\nBAT_5V / VSYS",
role: "Isolates battery source",
connection: "BAT_5V / VSYS",
},
{
name: "J_PWR_SW",
sheet: "battery",
x: -0.26,
y: 7,
noteX: -1.097,
noteY: 9.22,
label: "J_PWR_SW: \nEnables battery\npower\nProtected AA /\nconverter EN",
role: "Enables battery power",
connection: "Protected AA / converter EN",
},
{
name: "D_USB_POWER",
sheet: "rails",
x: -8,
y: 2,
noteX: -9.06,
noteY: 1.33,
label: "D_USB_POWER: \nIsolates USB source\nVBUS / VSYS",
role: "Isolates USB source",
connection: "VBUS / VSYS",
},
{
name: "U_3V3",
sheet: "rails",
x: 0,
y: 2,
noteX: -0.837,
noteY: 0.95,
label: "U_3V3: \nRegulates logic\nsupply\nVSYS / 3V2",
role: "Regulates logic supply",
connection: "VSYS / 3V2",
},
{
name: "L_3V3",
sheet: "rails",
x: 4,
y: 2,
noteX: 3.219,
noteY: 1.37,
label: "L_3V3: \nSmooths buck\nswitching\nU_3V2 SW / 3V2",
role: "Smooths buck switching",
connection: "U_3V2 SW / 3V2",
},
{
name: "C_3V3_IN",
sheet: "rails",
x: -4,
y: 0,
noteX: -3.15,
noteY: 0.351,
label: "C_3V3_IN: \nBypasses buck input\nVSYS / ground",
role: "Bypasses buck input",
connection: "VSYS / ground",
},
{
name: "C_3V3_BST",
sheet: "rails",
x: 3,
y: 5,
noteX: 3.85,
noteY: 5.468,
label: "C_3V3_BST: \nBootstraps buck\ndriver\nU_3V2 BST / SW",
role: "Bootstraps buck driver",
connection: "U_3V2 BST / SW",
rotation: 180,
orientation: "pos_bottom",
},
{
name: "C_3V3_OUT_A",
sheet: "rails",
x: 6,
y: -1,
noteX: 2.918,
noteY: -0.649,
label: "C_3V3_OUT_A: \nSmooths logic output\n3V2 / ground",
role: "Smooths logic output",
connection: "3V2 / ground",
},
{
name: "C_3V3_OUT_B",
sheet: "rails",
x: 7.8,
y: -1,
noteX: 8.65,
noteY: -0.649,
label: "C_3V3_OUT_B: \nBuffers logic output\n3V2 / ground",
role: "Buffers logic output",
connection: "3V2 / ground",
},
{
name: "U2",
sheet: "flash",
x: 0,
y: 1,
noteX: 1.09,
noteY: 1.351,
label: "U2: \nStores firmware\nU1 QSPI bus",
role: "Stores firmware",
connection: "U1 QSPI bus",
},
{
name: "R_BOOT",
sheet: "flash",
x: -3,
y: 4,
noteX: -4.06,
noteY: 5.402,
label: "R_BOOT: \nHolds flash CS high\n3V2 / flash CS",
role: "Holds flash CS high",
connection: "3V2 / flash CS",
rotation: 90,
},
{
name: "C_FLASH",
sheet: "flash",
x: 4,
y: 1,
noteX: 4.85,
noteY: 1.468,
label: "C_FLASH: \nBypasses flash\nsupply\nU2 VCC / ground",
role: "Bypasses flash supply",
connection: "U2 VCC / ground",
},
{
name: "U_PSRAM",
sheet: "psram",
x: 0,
y: 1,
noteX: -0.893,
noteY: -0.25,
label: "U_PSRAM: \nAdds working RAM\nU1 QSPI / PSRAM\nselect",
role: "Adds working RAM",
connection: "U1 QSPI / PSRAM select",
},
{
name: "C_PSRAM",
sheet: "psram",
x: 4,
y: 1,
noteX: 2.584,
noteY: 0.05,
label: "C_PSRAM: \nBypasses RAM supply\nU_PSRAM VDD / ground",
role: "Bypasses RAM supply",
connection: "U_PSRAM VDD / ground",
},
{
name: "R_PSRAM_CE",
sheet: "psram",
x: -3,
y: 4,
noteX: -2.15,
noteY: 4.051,
label: "R_PSRAM_CE: \nHolds RAM deselected\n3V2 / U_PSRAM CE",
role: "Holds RAM deselected",
connection: "3V2 / U_PSRAM CE",
rotation: 90,
},
{
name: "C_PSRAM_BULK",
sheet: "psram",
x: 5.8,
y: 1,
noteX: 6.65,
noteY: 1.351,
label: "C_PSRAM_BULK: \nBuffers RAM supply\nU_PSRAM VDD / ground",
role: "Buffers RAM supply",
connection: "U_PSRAM VDD / ground",
},
{
name: "J_SD",
sheet: "storage",
x: 0,
y: 1,
noteX: -1.116,
noteY: -0.45,
label: "J_SD: \nAccepts game storage\nU1 SD bus / 3V2",
role: "Accepts game storage",
connection: "U1 SD bus / 3V2",
},
{
name: "C_SD",
sheet: "storage",
x: 6,
y: -3,
noteX: 2.918,
noteY: -2.649,
label: "C_SD: \nBypasses card supply\nJ_SD VDD / ground",
role: "Bypasses card supply",
connection: "J_SD VDD / ground",
},
{
name: "R_SD_CMD",
sheet: "storage",
x: -7,
y: 4,
noteX: -7.949,
noteY: 5.636,
label: "R_SD_CMD: \nHolds card signal\nhigh\n3V2 / J_SD CMD",
role: "Holds card signal high",
connection: "3V2 / J_SD CMD",
rotation: 90,
},
{
name: "R_SD_CS",
sheet: "storage",
x: -5,
y: 4,
noteX: -5.949,
noteY: 6.736,
label: "R_SD_CS: \nHolds card signal\nhigh\n3V2 / J_SD CS",
role: "Holds card signal high",
connection: "3V2 / J_SD CS",
rotation: 90,
},
{
name: "R_SD_DAT0",
sheet: "storage",
x: -3,
y: 4,
noteX: -3.949,
noteY: 5.636,
label: "R_SD_DAT0: \nHolds card signal\nhigh\n3V2 / J_SD DAT0",
role: "Holds card signal high",
connection: "3V2 / J_SD DAT0",
rotation: 90,
},
{
name: "R_SD_DAT1",
sheet: "storage",
x: 3,
y: 4,
noteX: 2.051,
noteY: 5.636,
label: "R_SD_DAT1: \nHolds card signal\nhigh\n3V2 / J_SD DAT1",
role: "Holds card signal high",
connection: "3V2 / J_SD DAT1",
rotation: 90,
},
{
name: "R_SD_DAT2",
sheet: "storage",
x: 5,
y: 4,
noteX: 5.85,
noteY: 4.168,
label: "R_SD_DAT2: \nHolds card signal\nhigh\n3V2 / J_SD DAT2",
role: "Holds card signal high",
connection: "3V2 / J_SD DAT2",
rotation: 90,
},
{
name: "C_SD_BULK",
sheet: "storage",
x: 7.8,
y: -3,
noteX: 8.65,
noteY: -2.832,
label: "C_SD_BULK: \nBuffers card\ntransients\nJ_SD VDD / ground",
role: "Buffers card transients",
connection: "J_SD VDD / ground",
},
{
name: "R_AMP_IN",
sheet: "audio",
x: -13,
y: 5,
noteX: -13.949,
noteY: 4.275,
label: "R_AMP_IN: \nFilters PWM audio\nU1 GPIO22 / audio\nfilter",
role: "Filters PWM audio",
connection: "U1 GPIO22 / audio filter",
},
{
name: "C_AMP_PWM_FILTER",
sheet: "audio",
x: -10,
y: 2,
noteX: -9.15,
noteY: 2.351,
label: "C_AMP_PWM_FILTER: \nRemoves PWM carrier\nPWM filter / ground",
role: "Removes PWM carrier",
connection: "PWM filter / ground",
},
{
name: "C_AMP_IN_COUPLE",
sheet: "audio",
x: -1,
y: 5,
noteX: -1.704,
noteY: 7.436,
label: "C_AMP_IN_COUPLE: \nBlocks input DC\nVolume wiper / amp\ninput",
role: "Blocks input DC",
connection: "Volume wiper / amp input",
},
{
name: "C_AMP_POT_COUPLE",
sheet: "audio",
x: -7,
y: 6,
noteX: -8.06,
noteY: 8.12,
label: "C_AMP_POT_COUPLE: \nCouples filtered\naudio\nPWM filter / volume\ncontrol",
role: "Couples filtered audio",
connection: "PWM filter / volume control",
},
{
name: "RV_VOLUME",
sheet: "audio",
x: -3,
y: 5,
noteX: -4.116,
noteY: 7.086,
label: "RV_VOLUME: \nAdjusts loudness\nFiltered audio / amp\ninput",
role: "Adjusts loudness",
connection: "Filtered audio / amp input",
},
{
name: "U_SPK_AMP",
sheet: "audio",
x: 3,
y: 5,
noteX: 1.94,
noteY: 3.45,
label: "U_SPK_AMP: \nDrives mono speaker\nFiltered audio /\nJ_SPK",
role: "Drives mono speaker",
connection: "Filtered audio / J_SPK",
},
{
name: "C_AMP_VDD",
sheet: "audio",
x: 0,
y: -1,
noteX: -2.859,
noteY: -0.532,
label: "C_AMP_VDD: \nBypasses amplifier\nrail\nVSYS / amp ground",
role: "Bypasses amplifier rail",
connection: "VSYS / amp ground",
},
{
name: "C_AMP_VDD_BULK",
sheet: "audio",
x: 1.8,
y: -1,
noteX: 0.74,
noteY: -2.2,
label: "C_AMP_VDD_BULK: \nBuffers audio peaks\nVSYS / amp ground",
role: "Buffers audio peaks",
connection: "VSYS / amp ground",
},
{
name: "C_AMP_VREF",
sheet: "audio",
x: -1,
y: 2,
noteX: -0.15,
noteY: 2.468,
label: "C_AMP_VREF: \nStabilizes audio\nbias\nAmp VREF / ground",
role: "Stabilizes audio bias",
connection: "Amp VREF / ground",
},
{
name: "FB_SPK_POS",
sheet: "audio",
x: 7,
y: 7,
noteX: 5.884,
noteY: 6.15,
label: "FB_SPK_POS: \nFilters speaker EMI\nAmp L+ / J_SPK pin 1",
role: "Filters speaker EMI",
connection: "Amp L+ / J_SPK pin 1",
},
{
name: "FB_SPK_NEG",
sheet: "audio",
x: 7,
y: 3,
noteX: 5.884,
noteY: 2.15,
label: "FB_SPK_NEG: \nFilters speaker EMI\nAmp L- / J_SPK pin 2",
role: "Filters speaker EMI",
connection: "Amp L- / J_SPK pin 2",
},
{
name: "C_SPK_EMI_POS",
sheet: "audio",
x: 10,
y: 7,
noteX: 10.85,
noteY: 7.468,
label: "C_SPK_EMI_POS: \nShunts positive-\noutput RF\nSpeaker + / ground",
role: "Shunts positive-output RF",
connection: "Speaker + / ground",
},
{
name: "C_SPK_EMI_NEG",
sheet: "audio",
x: 10,
y: 3,
noteX: 10.85,
noteY: 3.468,
label: "C_SPK_EMI_NEG: \nShunts negative-\noutput RF\nSpeaker - / ground",
role: "Shunts negative-output RF",
connection: "Speaker - / ground",
},
{
name: "J_SPK",
sheet: "audio",
x: 14,
y: 5,
noteX: 13.051,
noteY: 4.05,
label: "J_SPK: \nJST-SH speaker\noutput\nAmp L+ / L-; no\nground",
role: "JST-SH speaker output",
connection: "Amp L+ / L-; no ground",
},
{
name: "J_LCD",
sheet: "display",
x: 0,
y: 2,
noteX: -1.116,
noteY: 6.52,
label: "J_LCD: \nConnects LCD and\ntouch\nU1 SPI / touch I2C /\nrails",
role: "Connects LCD and touch",
connection: "U1 SPI / touch I2C / rails",
},
{
name: "C_LCD_VDDI",
sheet: "display",
x: -5,
y: -3,
noteX: -7.97,
noteY: -2.649,
label: "C_LCD_VDDI: \nBypasses display IO\nLCD VDDI / ground",
role: "Bypasses display IO",
connection: "LCD VDDI / ground",
},
{
name: "C_LCD_VCI",
sheet: "display",
x: -3.2,
y: -3,
noteX: -4.093,
noteY: -3.95,
label: "C_LCD_VCI: \nBypasses display\nlogic\nLCD VCI / ground",
role: "Bypasses display logic",
connection: "LCD VCI / ground",
},
{
name: "R_TOUCH_SCL",
sheet: "display",
x: -7,
y: 4,
noteX: -7.949,
noteY: 5.636,
label: "R_TOUCH_SCL: \nPulls touch clock\nhigh\n3V2 / touch SCL",
role: "Pulls touch clock high",
connection: "3V2 / touch SCL",
rotation: 90,
},
{
name: "R_TOUCH_SDA",
sheet: "display",
x: -5,
y: 4,
noteX: -5.893,
noteY: 3.05,
label: "R_TOUCH_SDA: \nPulls touch data\nhigh\n3V2 / touch SDA",
role: "Pulls touch data high",
connection: "3V2 / touch SDA",
rotation: 90,
},
{
name: "R_TOUCH_IRQ",
sheet: "display",
x: -3,
y: 4,
noteX: -3.837,
noteY: 5.636,
label: "R_TOUCH_IRQ: \nPulls touch\ninterrupt high\n3V2 / touch IRQ",
role: "Pulls touch interrupt high",
connection: "3V2 / touch IRQ",
rotation: 90,
},
{
name: "R_LCD_LED",
sheet: "display",
x: 6,
y: 4,
noteX: 4.884,
noteY: 5.886,
label: "R_LCD_LED: \nLimits backlight\ncurrent\nVSYS / LCD backlight",
role: "Limits backlight current",
connection: "VSYS / LCD backlight",
rotation: -90,
},
{
name: "Q_LCD_BL",
sheet: "display",
x: 6,
y: 0,
noteX: 5.136,
noteY: -0.85,
label: "Q_LCD_BL: \nSwitches backlight\nPWM\nU1 GPIO24 / LED\ncathodes",
role: "Switches backlight PWM",
connection: "U1 GPIO24 / LED cathodes",
},
{
name: "R_LCD_BL_PULLDOWN",
sheet: "display",
x: 3,
y: -1,
noteX: 1.94,
noteY: -1.95,
label: "R_LCD_BL_PULLDOWN: \nKeeps backlight off\nat reset\nBacklight gate /\nground",
role: "Keeps backlight off at reset",
connection: "Backlight gate / ground",
rotation: -90,
},
{
name: "SW_UP",
sheet: "controls",
x: -6,
y: 5,
noteX: -6.949,
noteY: 4.15,
label: "SW_UP: \nUp button\nU1 GPIO2 / ground",
role: "Up button",
connection: "U1 GPIO2 / ground",
},
{
name: "SW_DOWN",
sheet: "controls",
x: -2,
y: 5,
noteX: -2.949,
noteY: 4.4,
label: "SW_DOWN: \nDown button\nU1 GPIO3 / ground",
role: "Down button",
connection: "U1 GPIO3 / ground",
},
{
name: "SW_LEFT",
sheet: "controls",
x: 2,
y: 5,
noteX: 1.051,
noteY: 4.15,
label: "SW_LEFT: \nLeft button\nU1 GPIO4 / ground",
role: "Left button",
connection: "U1 GPIO4 / ground",
},
{
name: "SW_RIGHT",
sheet: "controls",
x: 6,
y: 5,
noteX: 5.051,
noteY: 4.4,
label: "SW_RIGHT: \nRight button\nU1 GPIO5 / ground",
role: "Right button",
connection: "U1 GPIO5 / ground",
},
{
name: "SW_A",
sheet: "controls",
x: -6,
y: 1,
noteX: -6.949,
noteY: 0.15,
label: "SW_A: \nA button\nU1 GPIO6 / ground",
role: "A button",
connection: "U1 GPIO6 / ground",
},
{
name: "SW_B",
sheet: "controls",
x: -2,
y: 1,
noteX: -2.949,
noteY: 0.4,
label: "SW_B: \nB button\nU1 GPIO7 / ground",
role: "B button",
connection: "U1 GPIO7 / ground",
},
{
name: "SW_X",
sheet: "controls",
x: 2,
y: 1,
noteX: 0.996,
noteY: 0.15,
label: "SW_X: \nX button\nU1 GPIO12 / ground",
role: "X button",
connection: "U1 GPIO12 / ground",
},
{
name: "SW_Y",
sheet: "controls",
x: 6,
y: 1,
noteX: 5.051,
noteY: 0.4,
label: "SW_Y: \nY button\nU1 GPIO9 / ground",
role: "Y button",
connection: "U1 GPIO9 / ground",
},
{
name: "SW_SELECT",
sheet: "controls",
x: -6,
y: -3,
noteX: -7.004,
noteY: -3.85,
label: "SW_SELECT: \nSelect button\nU1 GPIO15 / ground",
role: "Select button",
connection: "U1 GPIO15 / ground",
},
{
name: "SW_START",
sheet: "controls",
x: -2,
y: -3,
noteX: -3.004,
noteY: -3.6,
label: "SW_START: \nStart button\nU1 GPIO11 / ground",
role: "Start button",
connection: "U1 GPIO11 / ground",
},
{
name: "SW_L",
sheet: "controls",
x: 2,
y: -3,
noteX: 0.996,
noteY: -3.6,
label: "SW_L: \nL button\nU1 GPIO13 / ground",
role: "L button",
connection: "U1 GPIO13 / ground",
},
{
name: "SW_R",
sheet: "controls",
x: 6,
y: -3,
noteX: 4.996,
noteY: -3.85,
label: "SW_R: \nR button\nU1 GPIO14 / ground",
role: "R button",
connection: "U1 GPIO14 / ground",
},
{"name": "R_LOGIC_FB_TOP", "sheet": "rails", "x": 10, "y": 2, "noteX": 10.85, "noteY": 2.35, "label": "R_LOGIC_FB_TOP: \nSets3.23V supply\nLogic output / FB", "role": "Sets3.23V supply", "connection": "Logic output / FB"},{"name": "R_LOGIC_FB_BOTTOM", "sheet": "rails", "x": 10, "y": -2, "noteX": 10.85, "noteY": -1.65, "label": "R_LOGIC_FB_BOTTOM: \nSets feedback ratio\nFB / ground", "role": "Sets feedback ratio", "connection": "FB / ground"},{"name": "R_SPK_LIMIT", "sheet": "audio", "x": 3, "y": -7, "noteX": 3.85, "noteY": -6.65, "label": "R_SPK_LIMIT: \nLimits audio gain\nCoupling cap / INL", "role": "Limits audio gain", "connection": "Coupling cap / INL"},
{"name": "R_LOGIC_FB_TRIM", "sheet": "rails", "x": 10, "y": 6, "noteX": 10.85, "noteY": 6.35, "label": "R_LOGIC_FB_TRIM: \nAdds voltage margin\nOutput / upper divider", "role": "Adds voltage margin", "connection": "Output / upper divider"},
] as const;
export const SchematicSheets = () => (
<>
{sheets.map((sheet, sheetIndex) => {
const sheetNotes = notes.filter((note) => note.sheet === sheet.name);
const headingY = Math.max(...sheetNotes.map((note) => Math.max(note.y, note.noteY))) + 1.6;
return (
<SchematicSheet
key={sheet.name}
name={sheet.name}
displayName={sheet.title}
sheetIndex={sheetIndex}
sheetSize="A4"
>
<SchematicText
text={sheet.title}
schX={-13.5}
schY={headingY}
fontSize={0.55}
anchor="top_left"
/>
{sheetNotes.map((note) => (
<SchematicText
key={note.name}
text={note.label}
schX={note.noteX}
schY={note.noteY}
fontSize={0.18}
anchor="top_left"
color="#334155"
/>
))}
</SchematicSheet>
);
})}
</>
);
Related Packages
More from this authorabse/isv57t090-motion-controllerA 36 V-powered RP2040 motion-controller PCB that regulates 5 V, drives isolated STEP/DIR servo inputs, monitors alarms, temperature, limits and E-stop signals, and provides protected safety/field connectors.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newShiboSoftwareDev/nema8-20mm-usbc-pd-controllerA 20×20 mm four-layer USB‑C PD stepper motor controller PCB using a CH32X035 MCU, TMC2209 driver, protected power inputs, USB data/boot interface, 3.3 V regulation, ESD/TVS protection, current-sense circuitry, and NEMA‑8 motor outputs.