abse/boostxl-sharp128

This code defines a printed circuit board (PCB) with various surface-mount resistors, capacitors, inductors, and integrated circuits, including power management components and interface connectors, for a TI-based LCD and microSD module using 0603 and other package types.

Version
1.0.0
License
unset
Stars
0

imports/SSQ_110_03_T_D.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["pin1"],
  pin2: ["pin2"],
  pin3: ["pin3"],
  pin4: ["pin4"],
  pin5: ["pin5"],
  pin6: ["pin6"],
  pin7: ["pin7"],
  pin8: ["pin8"],
  pin9: ["pin9"],
  pin10: ["pin10"],
  pin11: ["pin11"],
  pin12: ["pin12"],
  pin13: ["pin13"],
  pin14: ["pin14"],
  pin15: ["pin15"],
  pin16: ["pin16"],
  pin17: ["pin17"],
  pin18: ["pin18"],
  pin19: ["pin19"],
  pin20: ["pin20"]
} as const

export const SSQ_110_03_T_D = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      supplierPartNumbers={{
  "jlcpcb": [
    "C5379997"
  ]
}}
      manufacturerPartNumber="SSQ_110_03_T_D"
      footprint={<footprint>
        <platedhole  portHints={["pin20"]} pcbX="-11.43mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin19"]} pcbX="-11.43mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin18"]} pcbX="-8.89mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin17"]} pcbX="-8.89mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin16"]} pcbX="-6.35mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin15"]} pcbX="-6.35mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin14"]} pcbX="-3.81mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin13"]} pcbX="-3.81mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin12"]} pcbX="-1.27mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin11"]} pcbX="-1.27mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin10"]} pcbX="1.27mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin9"]} pcbX="1.27mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin8"]} pcbX="3.81mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin7"]} pcbX="3.81mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin6"]} pcbX="6.35mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin5"]} pcbX="6.35mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin4"]} pcbX="8.89mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin3"]} pcbX="8.89mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin2"]} pcbX="11.43mm" pcbY="1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<platedhole  portHints={["pin1"]} pcbX="11.43mm" pcbY="-1.27mm" outerDiameter="1.530096mm" holeDiameter="1.020064mm" shape="circle" />
<silkscreenpath route={[{"x":12.955016,"y":-2.4749760000000833},{"x":-12.955016,"y":-2.4749760000000833},{"x":-12.955016,"y":2.4749760000000833},{"x":12.955016,"y":2.4749760000000833},{"x":12.955016,"y":-2.4749760000000833}]} />
<silkscreentext text="{NAME}" pcbX="0.0127mm" pcbY="3.4892mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-13.204000000000065,"y":2.7391999999999825},{"x":13.229399999999828,"y":2.7391999999999825},{"x":13.229399999999828,"y":-2.7391999999999825},{"x":-13.204000000000065,"y":-2.7391999999999825},{"x":-13.204000000000065,"y":2.7391999999999825}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C5379997.obj?uuid=c521c5e307514285b27bb4c944aa47df",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C5379997.step?uuid=c521c5e307514285b27bb4c944aa47df",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: -0.000012699999956566899, y: -0.0049873000000433265, z: -0.000010000000000509601 },
      }}
      {...props}
    />
  )
}