abse/boostxl-ads7841-q1
The ADS7841ESQDBQRQ1 is a 16-pin touchscreen controller IC with voltage, ground, communication, and mode control pins designed for interfacing with touch sensors.
- Version
- 1.0.6
- License
- unset
- Stars
- 0
dist/index.js
import { jsx, jsxs } from 'react/jsx-runtime';
import objPath from '././assets/ADS7841ESQDBQRQ1-8a418a45.obj';
import stepPath from '././assets/ADS7841ESQDBQRQ1-abb738c1.step';
import objPath$1 from '././assets/A_5_1814832_2-b987212f.obj';
import stepPath$1 from '././assets/A_5_1814832_2-cfc15657.step';
import objPath$2 from '././assets/A_5001-202a87e9.obj';
import stepPath$2 from '././assets/A_5001-09d3965f.step';
import objPath$3 from '././assets/BR24G32FVT_3GE2-73e7705d.obj';
import stepPath$3 from '././assets/BR24G32FVT_3GE2-52c19618.step';
import objPath$4 from '././assets/OPA2320AQDGKRQ1-30b83b1d.obj';
import stepPath$4 from '././assets/OPA2320AQDGKRQ1-d0c3e83f.step';
import objPath$5 from '././assets/PEC02SAAN-882dfa81.obj';
import stepPath$5 from '././assets/PEC02SAAN-ab371332.step';
import objPath$6 from '././assets/PEC03SAAN-c8ff84f2.obj';
import stepPath$6 from '././assets/PEC03SAAN-b5212ff5.step';
import objPath$7 from '././assets/PZ254V_12_4P-a974cb90.obj';
import stepPath$7 from '././assets/PZ254V_12_4P-220c890a.step';
import objPath$8 from '././assets/PZ254V_12_6P-73f3628b.obj';
import stepPath$8 from '././assets/PZ254V_12_6P-10118318.step';
import objPath$9 from '././assets/REF5045AQDRQ1-7dd9baba.obj';
import stepPath$9 from '././assets/REF5045AQDRQ1-c92ad31a.step';
import objPath$a from '././assets/REG71055DDCR-a0745699.obj';
import stepPath$a from '././assets/REG71055DDCR-7137a637.step';
import objPath$b from '././assets/SN74LVC2T45QDCURQ1-f3326eaa.obj';
import stepPath$b from '././assets/SN74LVC2T45QDCURQ1-9e71ee3c.step';
import objPath$c from '././assets/SSQ_110_03_T_D-72062960.obj';
import stepPath$c from '././assets/SSQ_110_03_T_D-62c92b4d.step';
import objPath$d from '././assets/TPS79901DRVR-6ca8706f.obj';
import stepPath$d from '././assets/TPS79901DRVR-23a2340f.step';
const pinLabels$d = {
pin1: ["VCC2"],
pin2: ["CH0"],
pin3: ["CH1"],
pin4: ["CH2"],
pin5: ["CH3"],
pin6: ["COM"],
pin7: ["SHDN"],
pin8: ["VREF"],
pin9: ["VCC1"],
pin10: ["GND"],
pin11: ["MODE"],
pin12: ["DOUT"],
pin13: ["BUSY"],
pin14: ["DIN"],
pin15: ["CS"],
pin16: ["DCLK"]
};
const ADS7841ESQDBQRQ1 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$d, supplierPartNumbers: {
"jlcpcb": [
"C701652"
]
}, manufacturerPartNumber: "ADS7841ESQDBQRQ1", footprint: "dfn16_pillpads_p0.635mm_w7.1244mm_pw0.3556mm_pl1.8148mm_pin1location(leftside,bottom)", cadModel: {
objUrl: objPath,
stepUrl: stepPath,
pcbRotationOffset: 90,
modelOriginPosition: { x: -12700000070253736e-21, y: -12700000070253736e-21, z: 0.075575 },
}, ...props }));
};
const pinLabels$c = {
pin1: ["GND1"],
pin2: ["GND2"],
pin3: ["GND3"],
pin4: ["GND4"],
pin5: ["SIGNAL"]
};
const A_5_1814832_2 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$c, supplierPartNumbers: {
"jlcpcb": [
"C482015"
]
}, manufacturerPartNumber: "5-1814832-1", footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin1"], pcbX: "-2.54mm", pcbY: "-2.54mm", outerDiameter: "2.7999944mm", holeDiameter: "1.7999964mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin2"], pcbX: "-2.54mm", pcbY: "2.54mm", outerDiameter: "2.7999944mm", holeDiameter: "1.7999964mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin3"], pcbX: "2.54mm", pcbY: "2.54mm", outerDiameter: "2.7999944mm", holeDiameter: "1.7999964mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin4"], pcbX: "2.54mm", pcbY: "-2.54mm", outerDiameter: "2.7999944mm", holeDiameter: "1.7999964mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin5"], pcbX: "-0.000254mm", pcbY: "0.000254mm", outerDiameter: "2.499995mm", holeDiameter: "1.700022mm", shape: "circle" }), jsx("silkscreenpath", { route: [{ "x": 1.2020295999999462, "y": 3.1751270000000886 }, { "x": -1.2022836000001007, "y": 3.1751270000000886 }] }), jsx("silkscreenpath", { route: [{ "x": 3.174872999999934, "y": -1.2020295999998325 }, { "x": 3.174872999999934, "y": 1.2022836000001007 }] }), jsx("silkscreenpath", { route: [{ "x": -1.2022836000001007, "y": -3.174872999999934 }, { "x": 1.2020295999999462, "y": -3.174872999999934 }] }), jsx("silkscreenpath", { route: [{ "x": -3.1751270000002023, "y": 1.2022836000001007 }, { "x": -3.1751270000002023, "y": -1.2020295999998325 }] }), jsx("silkscreentext", { text: "{NAME}", pcbX: "0mm", pcbY: "5.0386mm", anchorAlignment: "center", fontSize: "1mm" }), jsx("courtyardoutline", { outline: [{ "x": -4.288600000000088, "y": 4.288600000000088 }, { "x": 4.28859999999986, "y": 4.288600000000088 }, { "x": 4.28859999999986, "y": -4.288599999999974 }, { "x": -4.288600000000088, "y": -4.288599999999974 }, { "x": -4.288600000000088, "y": 4.288600000000088 }] })] }), cadModel: {
objUrl: objPath$1,
stepUrl: stepPath$1,
pcbRotationOffset: 0,
modelOriginPosition: { x: 0, y: 0, z: -8000000000230045e-21 },
}, ...props }));
};
const pinLabels$b = {
pin1: ["pin1"]
};
const A_5001 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$b, supplierPartNumbers: {
"jlcpcb": [
"C238122"
]
}, manufacturerPartNumber: "A_5001", footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin1"], pcbX: "0mm", pcbY: "0mm", outerDiameter: "1.8999962mm", holeDiameter: "1.3899896mm", shape: "circle" }), jsx("silkscreenpath", { route: [{ "x": 1.2699999999998681, "y": 0 }, { "x": 1.226725799387168, "y": -0.3287001872802193 }, { "x": 1.0998522628062801, "y": -0.6349999999999909 }, { "x": 0.8980256121069488, "y": -0.8980256121069488 }, { "x": 0.6349999999999909, "y": -1.0998522628061664 }, { "x": 0.32870018728010564, "y": -1.226725799387168 }, { "x": 0, "y": -1.2699999999999818 }, { "x": -0.3287001872802193, "y": -1.226725799387168 }, { "x": -0.6350000000001046, "y": -1.0998522628061664 }, { "x": -0.8980256121069488, "y": -0.8980256121069488 }, { "x": -1.0998522628062801, "y": -0.6349999999999909 }, { "x": -1.226725799387168, "y": -0.3287001872802193 }, { "x": -1.2699999999999818, "y": 0 }, { "x": -1.226725799387168, "y": 0.3287001872802193 }, { "x": -1.0998522628062801, "y": 0.6349999999999909 }, { "x": -0.8980256121069488, "y": 0.8980256121069488 }, { "x": -0.6350000000001046, "y": 1.0998522628062801 }, { "x": -0.3287001872802193, "y": 1.226725799387168 }, { "x": 0, "y": 1.2700000000000955 }, { "x": 0.32870018728010564, "y": 1.226725799387168 }, { "x": 0.6349999999999909, "y": 1.0998522628062801 }, { "x": 0.8980256121069488, "y": 0.8980256121069488 }, { "x": 1.0998522628062801, "y": 0.6349999999999909 }, { "x": 1.226725799387168, "y": 0.3287001872802193 }, { "x": 1.2699999999998681, "y": 0 }] }), jsx("silkscreentext", { text: "{NAME}", pcbX: "0.0127mm", pcbY: "2.2954mm", anchorAlignment: "center", fontSize: "1mm" }), jsx("courtyardoutline", { outline: [{ "x": -1.5199999999999818, "y": 1.5453999999999724 }, { "x": 1.5453999999999724, "y": 1.5453999999999724 }, { "x": 1.5453999999999724, "y": -1.5199999999999818 }, { "x": -1.5199999999999818, "y": -1.5199999999999818 }, { "x": -1.5199999999999818, "y": 1.5453999999999724 }] })] }), cadModel: {
objUrl: objPath$2,
stepUrl: stepPath$2,
pcbRotationOffset: 0,
modelOriginPosition: { x: 0.0050038000000540706, y: 0, z: -0.05000599999999977 },
}, ...props }));
};
const pinLabels$a = {
pin1: ["A0"],
pin2: ["A1"],
pin3: ["A2"],
pin4: ["GND"],
pin5: ["SDA"],
pin6: ["SCL"],
pin7: ["WP"],
pin8: ["VCC"]
};
const BR24G32FVT_3GE2 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$a, supplierPartNumbers: {
"jlcpcb": [
"C2061284"
]
}, manufacturerPartNumber: "BR24G32FVT-3AGE2", footprint: "dfn8_pillpads_p0.65mm_w7.3082mm_pw0.353mm_pl1.454mm_pin1location(leftside,bottom)", cadModel: {
objUrl: objPath$3,
stepUrl: stepPath$3,
pcbRotationOffset: 0,
modelOriginPosition: { x: 0, y: 0, z: 0 },
}, ...props }));
};
const pinLabels$9 = {
pin1: ["OUTA"],
pin2: ["INA_NEG"],
pin3: ["INA_POS"],
pin4: ["V_NEG"],
pin5: ["INB_POS"],
pin6: ["INB_NEG"],
pin7: ["OUTB"],
pin8: ["V_POS"]
};
const OPA2320AQDGKRQ1 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$9, supplierPartNumbers: {
"jlcpcb": [
"C189188"
]
}, manufacturerPartNumber: "OPA2320AQDGKRQ1", footprint: "dfn8_pillpads_p0.65mm_w5.9241mm_pw0.364mm_pl1.662mm_pin1location(leftside,bottom)", cadModel: {
objUrl: objPath$4,
stepUrl: stepPath$4,
pcbRotationOffset: 90,
modelOriginPosition: { x: -12700000070253736e-21, y: 0, z: -0.149083 },
}, ...props }));
};
const pinLabels$8 = {
pin1: ["pin1"],
pin2: ["pin2"]
};
const PEC02SAAN = (props) => {
return (jsx("chip", { pinLabels: pinLabels$8, supplierPartNumbers: {
"jlcpcb": [
"C7261569"
]
}, manufacturerPartNumber: "PEC02SAAN", footprint: "radial_p2.54mm_od1.65mm_id1mm", cadModel: {
objUrl: objPath$5,
stepUrl: stepPath$5,
pcbRotationOffset: 0,
modelOriginPosition: { x: -2.54, y: 0, z: -0.05000599999999977 },
}, ...props }));
};
const pinLabels$7 = {
pin1: ["pin1"],
pin2: ["pin2"],
pin3: ["pin3"]
};
const PEC03SAAN = (props) => {
return (jsx("chip", { pinLabels: pinLabels$7, supplierPartNumbers: {
"jlcpcb": [
"C5708637"
]
}, manufacturerPartNumber: "PEC03SAAN", footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin1"], pcbX: "2.54mm", pcbY: "0mm", outerDiameter: "1.5999968mm", holeDiameter: "1.0200132mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin2"], pcbX: "-0mm", pcbY: "0mm", outerDiameter: "1.5999968mm", holeDiameter: "1.0200132mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin3"], pcbX: "-2.54mm", pcbY: "0mm", outerDiameter: "1.5999968mm", holeDiameter: "1.0200132mm", shape: "circle" }), jsx("silkscreenpath", { route: [{ "x": 3.810050799999999, "y": 1.2700000000000955 }, { "x": -3.810000000000173, "y": 1.2700000000000955 }] }), jsx("silkscreenpath", { route: [{ "x": -3.810000000000173, "y": 1.2700000000000955 }, { "x": -3.810000000000173, "y": -1.2699999999999818 }] }), jsx("silkscreenpath", { route: [{ "x": -3.810000000000173, "y": -1.2699999999999818 }, { "x": 3.810050799999999, "y": -1.2699999999999818 }] }), jsx("silkscreenpath", { route: [{ "x": 3.810050799999999, "y": -1.2699999999999818 }, { "x": 3.810050799999999, "y": 1.2700000000000955 }] }), jsx("silkscreentext", { text: "{NAME}", pcbX: "0.0127mm", pcbY: "2.27mm", anchorAlignment: "center", fontSize: "1mm" }), jsx("courtyardoutline", { outline: [{ "x": -4.060000000000173, "y": 1.5200000000000955 }, { "x": 4.085399999999936, "y": 1.5200000000000955 }, { "x": 4.085399999999936, "y": -1.5199999999999818 }, { "x": -4.060000000000173, "y": -1.5199999999999818 }, { "x": -4.060000000000173, "y": 1.5200000000000955 }] })] }), cadModel: {
objUrl: objPath$6,
stepUrl: stepPath$6,
pcbRotationOffset: 0,
modelOriginPosition: { x: -1.2649872999999299, y: -12700000070253736e-21, z: -5999999999950489e-21 },
}, ...props }));
};
const pinLabels$6 = {
pin1: ["pin1"],
pin2: ["pin2"],
pin3: ["pin3"],
pin4: ["pin4"]
};
const PZ254V_12_4P = (props) => {
return (jsx("chip", { pinLabels: pinLabels$6, supplierPartNumbers: {
"jlcpcb": [
"C492419"
]
}, manufacturerPartNumber: "PEC02DAAN", footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin1"], pcbX: "-1.27mm", pcbY: "-1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin2"], pcbX: "-1.27mm", pcbY: "1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin3"], pcbX: "1.27mm", pcbY: "-1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin4"], pcbX: "1.27mm", pcbY: "1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("silkscreenpath", { route: [{ "x": 2.769997000000103, "y": 2.5399999999999636 }, { "x": 2.769997000000103, "y": -2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -2.7699969999998757, "y": 2.5399999999999636 }, { "x": 2.769997000000103, "y": 2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -2.7699969999998757, "y": -2.5399999999999636 }, { "x": 2.769997000000103, "y": -2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -2.7699969999998757, "y": 0.007061199999952805 }, { "x": 0, "y": 0.007061199999952805 }, { "x": 0, "y": -2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -2.7699969999998757, "y": 2.5399999999999636 }, { "x": -2.7699969999998757, "y": -2.5399999999999636 }] }), jsx("silkscreentext", { text: "{NAME}", pcbX: "0mm", pcbY: "3.54mm", anchorAlignment: "center", fontSize: "1mm" }), jsx("courtyardoutline", { outline: [{ "x": -3.018599999999992, "y": 2.7899999999999636 }, { "x": 3.018599999999992, "y": 2.7899999999999636 }, { "x": 3.018599999999992, "y": -2.7899999999999636 }, { "x": -3.018599999999992, "y": -2.7899999999999636 }, { "x": -3.018599999999992, "y": 2.7899999999999636 }] })] }), cadModel: {
objUrl: objPath$7,
stepUrl: stepPath$7,
pcbRotationOffset: 0,
modelOriginPosition: { x: 0.0004872999999296912, y: 0, z: -5999999999950489e-21 },
}, ...props }));
};
const pinLabels$5 = {
pin1: ["pin1"],
pin2: ["pin2"],
pin3: ["pin3"],
pin4: ["pin4"],
pin5: ["pin5"],
pin6: ["pin6"]
};
const PZ254V_12_6P = (props) => {
return (jsx("chip", { pinLabels: pinLabels$5, supplierPartNumbers: {
"jlcpcb": [
"C492420"
]
}, manufacturerPartNumber: "TSW-103-07-G-D", footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin1"], pcbX: "-2.54mm", pcbY: "-1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin2"], pcbX: "-2.54mm", pcbY: "1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin3"], pcbX: "0mm", pcbY: "-1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin4"], pcbX: "0mm", pcbY: "1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin5"], pcbX: "2.54mm", pcbY: "-1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin6"], pcbX: "2.54mm", pcbY: "1.27mm", outerDiameter: "1.6999966mm", holeDiameter: "1.1000232mm", shape: "circle" }), jsx("silkscreenpath", { route: [{ "x": 4.039996999999971, "y": 2.5399999999999636 }, { "x": 4.039996999999971, "y": -2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -4.0399969999998575, "y": -2.5399999999999636 }, { "x": 4.039996999999971, "y": -2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -4.0399969999998575, "y": 2.5399999999999636 }, { "x": 4.039996999999971, "y": 2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -4.0399969999998575, "y": 0.007061199999952805 }, { "x": -1.2699999999999818, "y": 0.007061199999952805 }, { "x": -1.2699999999999818, "y": -2.5399999999999636 }] }), jsx("silkscreenpath", { route: [{ "x": -4.0399969999998575, "y": 2.5399999999999636 }, { "x": -4.0399969999998575, "y": -2.5399999999999636 }] }), jsx("silkscreentext", { text: "{NAME}", pcbX: "0mm", pcbY: "3.54mm", anchorAlignment: "center", fontSize: "1mm" }), jsx("courtyardoutline", { outline: [{ "x": -4.288599999999974, "y": 2.7899999999999636 }, { "x": 4.288600000000088, "y": 2.7899999999999636 }, { "x": 4.288600000000088, "y": -2.7899999999999636 }, { "x": -4.288599999999974, "y": -2.7899999999999636 }, { "x": -4.288599999999974, "y": 2.7899999999999636 }] })] }), cadModel: {
objUrl: objPath$8,
stepUrl: stepPath$8,
pcbRotationOffset: 0,
modelOriginPosition: { x: 2.545, y: -1.2700127000000703, z: -5999999999950489e-21 },
}, ...props }));
};
const pinLabels$4 = {
pin1: ["DNC2"],
pin2: ["VIN"],
pin3: ["TEMP"],
pin4: ["GND"],
pin5: ["pin5"],
pin6: ["VOUT"],
pin7: ["NC"],
pin8: ["DNC1"]
};
const REF5045AQDRQ1 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$4, supplierPartNumbers: {
"jlcpcb": [
"C2872966"
]
}, manufacturerPartNumber: "REF5045AQDRQ1", footprint: "soic8_pillpads_w7.3604mm_pw0.5684mm_pl1.9502mm_pin1location(leftside,bottom)", cadModel: {
objUrl: objPath$9,
stepUrl: stepPath$9,
pcbRotationOffset: 0,
modelOriginPosition: { x: -38099999983387534e-21, y: -1015999999935957e-19, z: -0.86 },
}, ...props }));
};
const pinLabels$3 = {
pin1: ["VOUT"],
pin2: ["GND"],
pin3: ["Enable"],
pin4: ["CPUMP_NEG"],
pin5: ["VIN"],
pin6: ["CPUMP_POS"]
};
const REG71055DDCR = (props) => {
return (jsx("chip", { pinLabels: pinLabels$3, supplierPartNumbers: {
"jlcpcb": [
"C2071120"
]
}, manufacturerPartNumber: "REG71055IDDCRQ1", footprint: "dfn6_p0.95mm_w3.2mm_pw0.532mm_pl0.8mm_pin1location(rightside,bottom)", cadModel: {
objUrl: objPath$a,
stepUrl: stepPath$a,
pcbRotationOffset: 180,
modelOriginPosition: { x: -1269999999067295e-19, y: -12699999956566899e-21, z: 0.050795 },
}, ...props }));
};
const pinLabels$2 = {
pin1: ["VCCA"],
pin2: ["A1"],
pin3: ["A2"],
pin4: ["GND"],
pin5: ["DIR"],
pin6: ["B2"],
pin7: ["B1"],
pin8: ["VCCB"]
};
const SN74LVC2T45QDCURQ1 = (props) => {
return (jsx("chip", { pinLabels: pinLabels$2, supplierPartNumbers: {
"jlcpcb": [
"C2652936"
]
}, manufacturerPartNumber: "SN74LVC2T45QDCURQ1", footprint: "dfn8_pillpads_p0.5001mm_w3.7102mm_pw0.28mm_pl0.905mm_pin1location(leftside,bottom)", cadModel: {
objUrl: objPath$b,
stepUrl: stepPath$b,
pcbRotationOffset: 270,
modelOriginPosition: { x: -38099999983387534e-21, y: 0, z: -0.535 },
}, ...props }));
};
const pinLabels$1 = {
pin1: ["pin1"],
pin2: ["pin2"],
pin3: ["pin3"],
pin4: ["pin4"],
pin5: ["pin5"],
pin6: ["pin6"],
pin7: ["pin7"],
pin8: ["pin8"],
pin9: ["pin9"],
pin10: ["pin10"],
pin11: ["pin11"],
pin12: ["pin12"],
pin13: ["pin13"],
pin14: ["pin14"],
pin15: ["pin15"],
pin16: ["pin16"],
pin17: ["pin17"],
pin18: ["pin18"],
pin19: ["pin19"],
pin20: ["pin20"]
};
const SSQ_110_03_T_D = (props) => {
return (jsx("chip", { pinLabels: pinLabels$1, supplierPartNumbers: {
"jlcpcb": [
"C5379997"
]
}, manufacturerPartNumber: "SSQ_110_03_T_D", footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin20"], pcbX: "-11.43mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin19"], pcbX: "-11.43mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin18"], pcbX: "-8.89mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin17"], pcbX: "-8.89mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin16"], pcbX: "-6.35mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin15"], pcbX: "-6.35mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin14"], pcbX: "-3.81mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin13"], pcbX: "-3.81mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin12"], pcbX: "-1.27mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin11"], pcbX: "-1.27mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin10"], pcbX: "1.27mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin9"], pcbX: "1.27mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin8"], pcbX: "3.81mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin7"], pcbX: "3.81mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin6"], pcbX: "6.35mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin5"], pcbX: "6.35mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin4"], pcbX: "8.89mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin3"], pcbX: "8.89mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin2"], pcbX: "11.43mm", pcbY: "1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("platedhole", { portHints: ["pin1"], pcbX: "11.43mm", pcbY: "-1.27mm", outerDiameter: "1.530096mm", holeDiameter: "1.020064mm", shape: "circle" }), jsx("silkscreenpath", { route: [{ "x": 12.955016, "y": -2.4749760000000833 }, { "x": -12.955016, "y": -2.4749760000000833 }, { "x": -12.955016, "y": 2.4749760000000833 }, { "x": 12.955016, "y": 2.4749760000000833 }, { "x": 12.955016, "y": -2.4749760000000833 }] }), jsx("silkscreentext", { text: "{NAME}", pcbX: "0.0127mm", pcbY: "3.4892mm", anchorAlignment: "center", fontSize: "1mm" }), jsx("courtyardoutline", { outline: [{ "x": -13.204000000000065, "y": 2.7391999999999825 }, { "x": 13.229399999999828, "y": 2.7391999999999825 }, { "x": 13.229399999999828, "y": -2.7391999999999825 }, { "x": -13.204000000000065, "y": -2.7391999999999825 }, { "x": -13.204000000000065, "y": 2.7391999999999825 }] })] }), cadModel: {
objUrl: objPath$c,
stepUrl: stepPath$c,
pcbRotationOffset: 0,
modelOriginPosition: { x: -12699999956566899e-21, y: -0.0049873000000433265, z: -10000000000509601e-21 },
}, ...props }));
};
const pinLabels = {
pin1: ["OUT"],
pin2: ["FB"],
pin3: ["GND"],
pin4: ["EN"],
pin5: ["NR"],
pin6: ["IN"],
pin7: ["EP", "GND"]
};
const footprinterPinLabels = {
...pinLabels,
"pin7": [...pinLabels["pin7"], "thermalpad"],
};
const TPS79901DRVR = (props) => {
return (jsx("chip", { pinLabels: footprinterPinLabels, supplierPartNumbers: {
"jlcpcb": [
"C398922"
]
}, manufacturerPartNumber: "TPS79901QDRVRQ1", footprint: "dfn6_thermalpad1mmx1.6mm_p0.65mm_w2.4002mm_pw0.4mm_pl0.45mm_pin1location(leftside,bottom)", cadModel: {
objUrl: objPath$d,
stepUrl: stepPath$d,
pcbRotationOffset: 90,
modelOriginPosition: { x: -12700000013410317e-21, y: 0, z: 0 },
}, ...props }));
};
const POWER_SHEET = "ADS7841 Power Supply";
const DIGITAL_SHEET = "ADS7841 LaunchPad and EEPROM";
const LEVEL_SHEET = "ADS7841 SPI Level Translation";
const ANALOG_SHEET = "ADS7841 Analog Input Buffers";
const ADC_SHEET = "ADS7841 ADC and Voltage Reference";
const N = {
GND: "net.GND",
V5: "net.V5",
V55_RAW: "net.V5V5_RAW",
V55: "net.V5V5",
VDD: "net.VDD",
V33: "net.V3V3",
LDO_FB: "net.LDO_FB",
LDO_NR: "net.LDO_NR",
CPUMP_P: "net.CPUMP_POS",
CPUMP_N: "net.CPUMP_NEG",
EEPROM_A0: "net.EEPROM_A0",
ID_SCL: "net.ID_SCL",
ID_SDA: "net.ID_SDA",
SCLK_TIVA: "net.SCLK_TIVA",
CS_TIVA: "net.CS_TIVA",
SDI_TIVA: "net.SDI_TIVA",
SDO_TIVA: "net.SDO_TIVA",
BUSY_TIVA: "net.BUSY_TIVA",
SHDN_TIVA: "net.SHDN_TIVA",
LP_SCLK: "net.LP_SCLK",
LP_SCL: "net.LP_SCL",
LP_SDA: "net.LP_SDA",
LP_CS: "net.LP_CS",
LP_SDI: "net.LP_SDI",
LP_SDO: "net.LP_SDO",
LP_BUSY: "net.LP_BUSY",
LP_SHDN: "net.LP_SHDN",
SCLK: "net.SCLK",
CS: "net.CS",
SDI: "net.SDI",
SDO: "net.SDO",
BUSY: "net.BUSY",
SHDN: "net.SHDN",
ADC_DCLK: "net.ADC_DCLK",
ADC_CS: "net.ADC_CS",
ADC_DIN: "net.ADC_DIN",
ADC_DOUT: "net.ADC_DOUT",
WP: "net.EEPROM_WP",
AIN0: "net.AIN0",
AIN1: "net.AIN1",
AIN2: "net.AIN2",
AIN3: "net.AIN3",
AMP0_IN: "net.AMP0_IN",
AMP0_PLUS: "net.AMP0_PLUS",
AMP0_MINUS: "net.AMP0_MINUS",
AMP0_OUT: "net.AMP0_OUT",
AMP2_IN: "net.AMP2_IN",
AMP2_PLUS: "net.AMP2_PLUS",
AMP2_MINUS: "net.AMP2_MINUS",
AMP2_OUT: "net.AMP2_OUT",
VREF: "net.VREF",
VREF45_FILTERED: "net.VREF_4V5_FILTERED",
VREF45_RAW: "net.VREF_4V5_RAW",
DIVIDER: "net.AIN3_DIVIDER",
DIVIDER_BOTTOM: "net.AIN3_DIVIDER_BOTTOM",
IDD: "net.ADC_IDD",
};
function Circuit() {
return (jsxs("board", { name: "BOOSTXL_ADS7841_Q1", width: "63.5mm", height: "44.45mm", layers: 4, solderMaskColor: "red", silkscreenColor: "white", defaultTraceWidth: "0.2mm", minViaHoleDiameter: "0.3mm", minViaPadDiameter: "0.45mm", autorouter: { preset: "auto_local", local: true, traceClearance: "0.2mm" }, autorouterEffortLevel: "1x", children: [jsx("schematicsheet", { name: POWER_SHEET, displayName: POWER_SHEET, sheetIndex: 1 }), jsx("schematicsheet", { name: DIGITAL_SHEET, displayName: DIGITAL_SHEET, sheetIndex: 2 }), jsx("schematicsheet", { name: LEVEL_SHEET, displayName: LEVEL_SHEET, sheetIndex: 3 }), jsx("schematicsheet", { name: ANALOG_SHEET, displayName: ANALOG_SHEET, sheetIndex: 4 }), jsx("schematicsheet", { name: ADC_SHEET, displayName: ADC_SHEET, sheetIndex: 5 }), jsx("hole", { name: "H1", diameter: "3.2mm", pcbX: -26.1, pcbY: 19.5 }), jsx("hole", { name: "H2", diameter: "3.2mm", pcbX: 28.9, pcbY: 19.5 }), jsx("hole", { name: "H3", diameter: "3.2mm", pcbX: -26.1, pcbY: -19.5 }), jsx("silkscreentext", { text: "BOOSTXL-ADS7841-Q1", pcbX: 14.8, pcbY: 20.7, fontSize: "0.9mm", anchorAlignment: "center" }), jsxs("group", { name: "POWER_SUPPLY", schSheetName: POWER_SHEET, schX: 0, schY: 0, pcbX: 0, pcbY: 0, schMaxTraceDistance: "1.2mm", schTraceAutoLabelEnabled: true, children: [jsx("schematicsection", { name: "POWER_GENERATION", displayName: "5 V to 5.5 V Charge Pump and 5 V LDO" }), jsx("schematictext", { text: "5 V input -> REG71055-Q1 -> TPS79901-Q1 -> VDD", schX: -13.8, schY: 5.4, fontSize: 0.2, anchor: "left" }), jsx(REG71055DDCR, { name: "U1", schX: -9.5, schY: 1.5, schWidth: "4.5mm", schHeight: "4.2mm", pcbX: -7.7, pcbY: 19.2, connections: { VIN: N.V5, Enable: N.V5, GND: N.GND, VOUT: N.V55_RAW, CPUMP_POS: N.CPUMP_P, CPUMP_NEG: N.CPUMP_N } }), jsx("capacitor", { name: "C1", capacitance: "0.22uF", footprint: "0603", manufacturerPartNumber: "C0603C224J3RAC7867", supplierPartNumbers: { jlcpcb: ["C106833"] }, schX: -9.5, schY: -1.7, pcbX: -9.5, pcbY: 16.4, connections: { pin1: N.CPUMP_P, pin2: N.CPUMP_N } }), jsx("capacitor", { name: "C2", capacitance: "2.2uF", footprint: "0805", manufacturerPartNumber: "C0805C225K4RACTU", supplierPartNumbers: { jlcpcb: ["C100210"] }, schX: -13, schY: 1.5, pcbX: -11.8, pcbY: 19.3, connections: { pin1: N.V5, pin2: N.GND } }), jsx("capacitor", { name: "C5", capacitance: "2.2uF", footprint: "0805", manufacturerPartNumber: "C0805C225K4RACTU", supplierPartNumbers: { jlcpcb: ["C100210"] }, schX: -6.4, schY: 1.5, pcbX: -3.2, pcbY: 16.8, connections: { pin1: N.V55_RAW, pin2: N.GND } }), jsx("resistor", { name: "R2", resistance: "10ohm", footprint: "0603", manufacturerPartNumber: "CRCW060310R0FKEA", supplierPartNumbers: { jlcpcb: ["C844919"] }, schX: -4, schY: 2.7, pcbX: -3.2, pcbY: 19.4, connections: { pin1: N.V55_RAW, pin2: N.V55 } }), jsx("capacitor", { name: "C6", capacitance: "10uF", footprint: "0805", manufacturerPartNumber: "0805YD106MAT2A", supplierPartNumbers: { jlcpcb: ["C13585"] }, schX: -3.8, schY: 0.7, pcbX: -4.3, pcbY: 14.6, connections: { pin1: N.V55, pin2: N.GND } }), jsx("capacitor", { name: "C7", capacitance: "1uF", footprint: "0603", manufacturerPartNumber: "C0603C105K3RACTU", supplierPartNumbers: { jlcpcb: ["C1591"] }, schX: -1.9, schY: 0.7, pcbX: 0.5, pcbY: 14.6, connections: { pin1: N.V55, pin2: N.GND } }), jsx(TPS79901DRVR, { name: "U2", schX: 1.2, schY: 1.5, schWidth: "4.8mm", schHeight: "4.2mm", pcbX: 3.1, pcbY: 17.8, connections: { pin1: N.VDD, pin2: N.LDO_FB, pin3: N.GND, pin4: N.V55, pin5: N.LDO_NR, pin6: N.V55, pin7: N.GND } }), jsx("capacitor", { name: "C8", displayName: "C8 DNP", doNotPlace: true, capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D (DNP)", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: 1.2, schY: -1.7, pcbX: 5.4, pcbY: 19.3, pcbRotation: 90, connections: { pin1: N.LDO_NR, pin2: N.GND } }), jsx("resistor", { name: "R4", resistance: "100kohm", footprint: "0402", manufacturerPartNumber: "RG1005P-104-B-T5", supplierPartNumbers: { jlcpcb: ["C2073385"] }, schX: 5.1, schY: 2.6, pcbX: 8.4, pcbY: 18.2, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.LDO_FB } }), jsx("resistor", { name: "R11", resistance: "31.6kohm", footprint: "0402", manufacturerPartNumber: "CRCW040231K6FKED", supplierPartNumbers: { jlcpcb: ["C316008"] }, schX: 5.1, schY: 0.5, pcbX: 9.8, pcbY: 18.2, pcbRotation: 90, connections: { pin1: N.LDO_FB, pin2: N.GND } }), jsx("capacitor", { name: "C3", capacitance: "180pF", footprint: "0402", manufacturerPartNumber: "04025A181FAT2A", supplierPartNumbers: { jlcpcb: ["C272803"] }, schX: 7.3, schY: 2.6, pcbX: 7.0, pcbY: 18.2, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.LDO_FB } }), jsx("capacitor", { name: "C4", capacitance: "2.2uF", footprint: "0805", manufacturerPartNumber: "C0805C225K4RACTU", supplierPartNumbers: { jlcpcb: ["C100210"] }, schX: 9.6, schY: 1.2, pcbX: 9.5, pcbY: 14.0, connections: { pin1: N.VDD, pin2: N.GND } }), jsx("testpoint", { name: "TP1", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: -13, schY: -3.3, pcbX: -13.8, pcbY: 17.5, connections: { pin1: N.V5 } }), jsx("testpoint", { name: "TP2", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 10.8, schY: -3.3, pcbX: 0, pcbY: 19.7, connections: { pin1: N.V55 } }), jsx("testpoint", { name: "TP3", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 13.0, schY: -3.3, pcbX: 7.0, pcbY: 15.3, connections: { pin1: N.VDD } }), jsx(A_5001, { name: "TP4", schX: -11.5, schY: -3.3, pcbX: -25, pcbY: 16.0, connections: { pin1: N.GND } }), jsx(A_5001, { name: "TP5", schX: -8.5, schY: -3.3, pcbX: 25.8, pcbY: 16.0, connections: { pin1: N.GND } }), jsx(A_5001, { name: "TP6", schX: -5.5, schY: -3.3, pcbX: -25, pcbY: -14.7, connections: { pin1: N.GND } }), jsx(A_5001, { name: "TP7", schX: -2.5, schY: -3.3, pcbX: 27.5, pcbY: -14.7, connections: { pin1: N.GND } })] }), jsxs("group", { name: "LAUNCHPAD_AND_EEPROM", schSheetName: DIGITAL_SHEET, schX: 0, schY: 0, pcbX: 0, pcbY: 0, schMaxTraceDistance: "0.7mm", schTraceAutoLabelEnabled: true, children: [jsx("schematicsection", { name: "LAUNCHPAD_HEADERS", displayName: "LaunchPad Headers and Board-ID EEPROM" }), jsx("schematictext", { text: "BoosterPack headers, board-ID EEPROM, and 0-ohm interface links", schX: -13.5, schY: 6.2, fontSize: 0.2, anchor: "left" }), jsx(SSQ_110_03_T_D, { name: "J1J3", schX: -12, schY: 0, schWidth: "4.8mm", schHeight: "9.6mm", pcbX: -21.6, pcbY: 0, layer: "bottom", pcbRotation: 90, connections: { pin1: N.V33, pin2: N.V5, pin4: N.GND, pin13: N.LP_SCLK, pin17: N.LP_SCL, pin19: N.LP_SDA } }), jsx(SSQ_110_03_T_D, { name: "J2J4", schX: 9.0, schY: 0, schWidth: "4.8mm", schHeight: "9.6mm", pcbX: 21.6, pcbY: 0, layer: "bottom", pcbRotation: 90, connections: { pin1: N.GND, pin3: N.LP_CS, pin9: N.LP_SDI, pin13: N.LP_SDO, pin17: N.LP_BUSY, pin20: N.LP_SHDN } }), jsx(BR24G32FVT_3GE2, { name: "U4", schX: -4, schY: 1.5, schWidth: "4.2mm", schHeight: "4.5mm", pcbX: -29.4, pcbY: -2.2, connections: { A0: N.EEPROM_A0, A1: N.GND, A2: N.GND, GND: N.GND, VCC: N.V33, WP: N.WP, SCL: N.ID_SCL, SDA: N.ID_SDA } }), jsx("resistor", { name: "R12", resistance: "10kohm", footprint: "0402", manufacturerPartNumber: "CRCW040210K0FKED", supplierPartNumbers: { jlcpcb: ["C71617"] }, schX: -7, schY: 4.8, pcbX: -27.8, pcbY: -9.6, pcbRotation: 90, connections: { pin1: N.EEPROM_A0, pin2: N.V33 } }), jsx("resistor", { name: "R13", resistance: "1kohm", footprint: "0402", manufacturerPartNumber: "MCR01MZPF1001", supplierPartNumbers: { jlcpcb: ["C253352"] }, schX: -3.8, schY: 4.8, pcbX: -26.7, pcbY: 5.2, pcbRotation: 90, connections: { pin1: N.ID_SCL, pin2: N.V33 } }), jsx("resistor", { name: "R14", resistance: "1kohm", footprint: "0402", manufacturerPartNumber: "MCR01MZPF1001", supplierPartNumbers: { jlcpcb: ["C253352"] }, schX: -1.8, schY: 4.8, pcbX: -28.1, pcbY: 5.2, pcbRotation: 90, connections: { pin1: N.ID_SDA, pin2: N.V33 } }), jsx("resistor", { name: "R15", resistance: "10kohm", footprint: "0402", manufacturerPartNumber: "CRCW040210K0FKED", supplierPartNumbers: { jlcpcb: ["C71617"] }, schX: 0.2, schY: 4.8, pcbX: -25.3, pcbY: 5.2, pcbRotation: 90, connections: { pin1: N.WP, pin2: N.V33 } }), jsx("capacitor", { name: "C11", capacitance: "0.1uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C104KA01D", supplierPartNumbers: { jlcpcb: ["C77050"] }, schX: 1.8, schY: 2.2, pcbX: -29.8, pcbY: 5.6, pcbRotation: 90, connections: { pin1: N.V33, pin2: N.GND } }), jsx(PEC02SAAN, { name: "J5", schX: 1.8, schY: -0.2, pcbX: -17.7, pcbY: 16.7, pcbRotation: 90, connections: { pin1: N.WP, pin2: N.GND } })] }), jsxs("group", { name: "SPI_LEVEL_TRANSLATION", schSheetName: LEVEL_SHEET, schX: 0, schY: 0, pcbX: 0, pcbY: 0, schMaxTraceDistance: "0.7mm", schTraceAutoLabelEnabled: true, children: [jsx("schematicsection", { name: "LEVEL_TRANSLATORS", displayName: "3.3 V LaunchPad to VDD SPI Level Translation" }), jsx("schematictext", { text: "Signal flow: LaunchPad 3.3 V domain <-> ADS7841 VDD domain", schX: -13.5, schY: 5.5, fontSize: 0.2, anchor: "left" }), jsx(SN74LVC2T45QDCURQ1, { name: "U3", schX: -8.2, schY: 1.4, schWidth: "4.2mm", schHeight: "4.7mm", pcbX: 15, pcbY: 8.3, connections: { VCCA: N.VDD, VCCB: N.V33, A1: N.CS, A2: N.SCLK, B1: N.CS_TIVA, B2: N.SCLK_TIVA, DIR: N.GND, GND: N.GND } }), jsx("capacitor", { name: "C9", capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -9.3, schY: -2.4, pcbX: 12.8, pcbY: 11.8, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.GND } }), jsx("capacitor", { name: "C10", capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -7, schY: -2.4, pcbX: 16.0, pcbY: 12.0, pcbRotation: 90, connections: { pin1: N.V33, pin2: N.GND } }), jsx(SN74LVC2T45QDCURQ1, { name: "U5", schX: 0, schY: 1.4, schWidth: "4.2mm", schHeight: "4.7mm", pcbX: 15, pcbY: 0, pcbRotation: 180, connections: { VCCA: N.VDD, VCCB: N.V33, A1: N.SDI, A2: N.SHDN, B1: N.SDI_TIVA, B2: N.SHDN_TIVA, DIR: N.GND, GND: N.GND } }), jsx("capacitor", { name: "C13", capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -1.1, schY: -2.4, pcbX: 13.5, pcbY: 4.2, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.GND } }), jsx("capacitor", { name: "C14", capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: 1.1, schY: -2.4, pcbX: 16.6, pcbY: 4.2, pcbRotation: 90, connections: { pin1: N.V33, pin2: N.GND } }), jsx(SN74LVC2T45QDCURQ1, { name: "U7", schX: 8.2, schY: 1.4, schWidth: "4.2mm", schHeight: "4.7mm", pcbX: 15, pcbY: -9.4, connections: { VCCA: N.V33, VCCB: N.VDD, A1: N.SDO_TIVA, A2: N.BUSY_TIVA, B1: N.SDO, B2: N.BUSY, DIR: N.GND, GND: N.GND } }), jsx("capacitor", { name: "C21", capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: 7.0, schY: -2.4, pcbX: 13.5, pcbY: -5.6, pcbRotation: 90, connections: { pin1: N.V33, pin2: N.GND } }), jsx("capacitor", { name: "C20", capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: 9.3, schY: -2.4, pcbX: 16.6, pcbY: -5.6, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.GND } })] }), jsxs("group", { name: "LAUNCHPAD_LINKS", schSheetName: DIGITAL_SHEET, schX: 0, schY: 0, pcbX: 0, pcbY: 0, schMaxTraceDistance: "0.7mm", schTraceAutoLabelEnabled: true, children: [jsx("resistor", { name: "R5", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -7.2, schY: -3.5, pcbX: -24.9, pcbY: -1.4, pcbRotation: 90, connections: { pin1: N.SCLK_TIVA, pin2: N.LP_SCLK } }), jsx("resistor", { name: "R8", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -7.2, schY: -5, pcbX: -26.6, pcbY: -1.4, pcbRotation: 90, connections: { pin1: N.ID_SCL, pin2: N.LP_SCL } }), jsx("resistor", { name: "R10", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -4.8, schY: -5, pcbX: -25.1, pcbY: -8.8, pcbRotation: 90, connections: { pin1: N.ID_SDA, pin2: N.LP_SDA } }), jsx("resistor", { name: "R1", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: 4.8, schY: -3.5, pcbX: 18.5, pcbY: 8.9, pcbRotation: 90, connections: { pin1: N.CS_TIVA, pin2: N.LP_CS } }), jsx("resistor", { name: "R3", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: 4.8, schY: -5, pcbX: 18.5, pcbY: 1.3, pcbRotation: 90, connections: { pin1: N.SDI_TIVA, pin2: N.LP_SDI } }), jsx("resistor", { name: "R6", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: 7.2, schY: -3.5, pcbX: 18.5, pcbY: -3.8, pcbRotation: 90, connections: { pin1: N.SDO_TIVA, pin2: N.LP_SDO } }), jsx("resistor", { name: "R7", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: 7.2, schY: -5, pcbX: 18.5, pcbY: -8.9, pcbRotation: 90, connections: { pin1: N.BUSY_TIVA, pin2: N.LP_BUSY } }), jsx("resistor", { name: "R9", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: 9.6, schY: -5, pcbX: 18.8, pcbY: -12.1, pcbRotation: 90, connections: { pin1: N.SHDN_TIVA, pin2: N.LP_SHDN } })] }), jsxs("group", { name: "ANALOG_BUFFERS", schSheetName: ANALOG_SHEET, schX: 0, schY: 0, pcbX: 0, pcbY: 0, schMaxTraceDistance: "1mm", schTraceAutoLabelEnabled: true, children: [jsx("schematicsection", { name: "OPTIONAL_INPUT_BUFFERS", displayName: "Optional OPA2320 Buffers for AIN0 and AIN2" }), jsx("schematictext", { text: "AIN0 and AIN2: optional SMA/header inputs, OPA2320-Q1 buffers, and RC filters", schX: -13.5, schY: 6.2, fontSize: 0.2, anchor: "left" }), jsx(OPA2320AQDGKRQ1, { name: "U6", schX: 0, schY: 0, schWidth: "5.0mm", schHeight: "5.0mm", schPinArrangement: { leftSide: [2, 3, 5, 6], rightSide: [1, 7], topSide: [8], bottomSide: [4] }, pcbX: -11.7, pcbY: -3.6, connections: { pin1: N.AMP0_OUT, pin2: N.AMP0_MINUS, pin3: N.AMP0_PLUS, pin4: N.GND, pin5: N.AMP2_PLUS, pin6: N.AMP2_MINUS, pin7: N.AMP2_OUT, pin8: N.VDD } }), jsx(A_5_1814832_2, { name: "J7", displayName: "J7 DNP", doNotPlace: true, schX: -12.5, schY: 3.8, schWidth: "3.6mm", schHeight: "3.8mm", pcbX: -18.5, pcbY: -17.2, connections: { SIGNAL: N.AMP0_IN, GND1: N.GND, GND2: N.GND, GND3: N.GND, GND4: N.GND } }), jsx(PEC02SAAN, { name: "J9", displayName: "J9 DNP", doNotPlace: true, schX: -10.5, schY: 3.8, pcbX: -18, pcbY: -9.8, pcbRotation: 90, connections: { pin1: N.AMP0_IN, pin2: N.GND } }), jsx("resistor", { name: "R20", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -8.5, schY: 3.8, pcbX: -12.5, pcbY: -13, connections: { pin1: N.AMP0_IN, pin2: N.AMP0_PLUS } }), jsx("capacitor", { name: "C18", displayName: "C18 DNP", doNotPlace: true, capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D (DNP)", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -6.8, schY: 2.1, pcbX: -10.3, pcbY: -8, connections: { pin1: N.AMP0_PLUS, pin2: N.GND } }), jsx("resistor", { name: "R22", resistance: "1Mohm", footprint: "0402", manufacturerPartNumber: "CRCW04021M00JNED", supplierPartNumbers: { jlcpcb: ["C26083"] }, schX: -5.3, schY: 2.1, pcbX: -8.2, pcbY: -10.2, pcbRotation: 90, connections: { pin1: N.AMP0_PLUS, pin2: N.GND } }), jsx("resistor", { name: "R17", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -4.8, schY: 4.8, pcbX: -13.8, pcbY: -11.2, connections: { pin1: N.AMP0_OUT, pin2: N.AMP0_MINUS } }), jsx("capacitor", { name: "C12", displayName: "C12 DNP", doNotPlace: true, capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D (DNP)", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -2.4, schY: 4.8, pcbX: -10.5, pcbY: -11.2, connections: { pin1: N.AMP0_OUT, pin2: N.AMP0_MINUS } }), jsx("resistor", { name: "R18", displayName: "R18 DNP", doNotPlace: true, resistance: "1kohm", footprint: "0402", manufacturerPartNumber: "CRCW04021K00JNED (DNP)", supplierPartNumbers: { jlcpcb: ["C71623"] }, schX: -7.4, schY: 0.1, pcbX: -14.5, pcbY: -7, connections: { pin1: N.AMP0_IN, pin2: N.AMP0_MINUS } }), jsx("resistor", { name: "R27", displayName: "R27 DNP", doNotPlace: true, resistance: "330kohm", footprint: "0402", manufacturerPartNumber: "CRCW0402330KJNED (DNP)", supplierPartNumbers: { jlcpcb: ["C25780"] }, schX: -10, schY: 1.2, pcbX: -14, pcbY: -2.8, pcbRotation: 90, connections: { pin1: N.AMP0_IN, pin2: N.VDD } }), jsx("resistor", { name: "R19", resistance: "100ohm", footprint: "0402", manufacturerPartNumber: "CRCW0402100RFKED", supplierPartNumbers: { jlcpcb: ["C82865"] }, schX: 5.0, schY: 3.8, pcbX: -8.8, pcbY: -1, pcbRotation: 90, connections: { pin1: N.AMP0_OUT, pin2: N.AIN0 } }), jsx("capacitor", { name: "C19", capacitance: "560pF", footprint: "0603", manufacturerPartNumber: "C0603C561J5GACTU", supplierPartNumbers: { jlcpcb: ["C107117"] }, schX: 7.5, schY: 2.1, pcbX: -16.2, pcbY: -4.8, pcbRotation: 90, connections: { pin1: N.AIN0, pin2: N.GND } }), jsx(PEC02SAAN, { name: "J8", schX: 10.0, schY: 3.8, pcbX: -6.7, pcbY: -4.6, pcbRotation: 90, connections: { pin1: N.AIN0, pin2: N.GND } }), jsx(A_5_1814832_2, { name: "J11", displayName: "J11 DNP", doNotPlace: true, schX: -12.5, schY: -3.8, schWidth: "3.6mm", schHeight: "3.8mm", pcbX: -10.7, pcbY: 11.2, connections: { SIGNAL: N.AMP2_IN, GND1: N.GND, GND2: N.GND, GND3: N.GND, GND4: N.GND } }), jsx(PEC02SAAN, { name: "J14", displayName: "J14 DNP", doNotPlace: true, schX: -10.5, schY: -3.8, pcbX: -15.8, pcbY: 3.6, pcbRotation: 90, connections: { pin1: N.AMP2_IN, pin2: N.GND } }), jsx("resistor", { name: "R32", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -8.5, schY: -3.8, pcbX: -11, pcbY: 5.4, connections: { pin1: N.AMP2_IN, pin2: N.AMP2_PLUS } }), jsx("capacitor", { name: "C28", displayName: "C28 DNP", doNotPlace: true, capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D (DNP)", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -6.8, schY: -5.3, pcbX: -10.7, pcbY: 2.5, connections: { pin1: N.AMP2_PLUS, pin2: N.GND } }), jsx("resistor", { name: "R33", resistance: "1Mohm", footprint: "0402", manufacturerPartNumber: "CRCW04021M00JNED", supplierPartNumbers: { jlcpcb: ["C26083"] }, schX: -5.3, schY: -5.3, pcbX: -7.7, pcbY: 0.8, pcbRotation: 90, connections: { pin1: N.AMP2_PLUS, pin2: N.GND } }), jsx("resistor", { name: "R28", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -4.8, schY: -2.8, pcbX: -7.8, pcbY: 4.3, connections: { pin1: N.AMP2_OUT, pin2: N.AMP2_MINUS } }), jsx("capacitor", { name: "C22", displayName: "C22 DNP", doNotPlace: true, capacitance: "0.01uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C103KA01D (DNP)", supplierPartNumbers: { jlcpcb: ["C57112"] }, schX: -2.4, schY: -2.8, pcbX: -7.8, pcbY: 6.0, connections: { pin1: N.AMP2_OUT, pin2: N.AMP2_MINUS } }), jsx("resistor", { name: "R29", displayName: "R29 DNP", doNotPlace: true, resistance: "1kohm", footprint: "0402", manufacturerPartNumber: "CRCW04021K00JNED (DNP)", supplierPartNumbers: { jlcpcb: ["C71623"] }, schX: -7.4, schY: -1, pcbX: -13, pcbY: 0.5, connections: { pin1: N.AMP2_IN, pin2: N.AMP2_MINUS } }), jsx("resistor", { name: "R34", displayName: "R34 DNP", doNotPlace: true, resistance: "330kohm", footprint: "0402", manufacturerPartNumber: "CRCW0402330KJNED (DNP)", supplierPartNumbers: { jlcpcb: ["C25780"] }, schX: -10, schY: -1.2, pcbX: -3, pcbY: -6, pcbRotation: 90, connections: { pin1: N.AMP2_IN, pin2: N.VDD } }), jsx("resistor", { name: "R30", resistance: "100ohm", footprint: "0402", manufacturerPartNumber: "CRCW0402100RFKED", supplierPartNumbers: { jlcpcb: ["C82865"] }, schX: 5.0, schY: -3.8, pcbX: -5, pcbY: 6.0, connections: { pin1: N.AMP2_OUT, pin2: N.AIN2 } }), jsx("capacitor", { name: "C29", capacitance: "560pF", footprint: "0603", manufacturerPartNumber: "C0603C561J5GACTU", supplierPartNumbers: { jlcpcb: ["C107117"] }, schX: 7.5, schY: -5.3, pcbX: -7.7, pcbY: 2.5, connections: { pin1: N.AIN2, pin2: N.GND } }), jsx(PEC02SAAN, { name: "J12", schX: 10.0, schY: -3.8, pcbX: -4.5, pcbY: -10.7, connections: { pin1: N.AIN2, pin2: N.GND } }), jsx("capacitor", { name: "C15", capacitance: "0.1uF", footprint: "0603", manufacturerPartNumber: "GRM188R71C104KA01D", supplierPartNumbers: { jlcpcb: ["C77050"] }, schX: 10.0, schY: 2.6, pcbX: -16, pcbY: -1, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.GND } })] }), jsxs("group", { name: "ADC_AND_REFERENCE", schSheetName: ADC_SHEET, schX: 0, schY: 0, pcbX: 0, pcbY: 0, schMaxTraceDistance: "1mm", schTraceAutoLabelEnabled: true, children: [jsx("schematicsection", { name: "ADC_REFERENCE_AND_INPUT", displayName: "ADS7841 ADC, Input Header, and REF5045" }), jsx("schematictext", { text: "ADS7841-Q1 data conversion, reference selection, input header, and AIN3 divider", schX: -13.5, schY: 7.0, fontSize: 0.2, anchor: "left" }), jsx(ADS7841ESQDBQRQ1, { name: "U8", schX: 0, schY: 1.5, schWidth: "5.6mm", schHeight: "7.8mm", pcbX: -1.1, pcbY: 0.4, connections: { VCC1: N.VDD, VCC2: N.VDD, CH0: N.AIN0, CH1: N.AIN1, CH2: N.AIN2, CH3: N.AIN3, COM: N.GND, SHDN: N.SHDN, VREF: N.VREF, GND: N.GND, MODE: N.GND, DOUT: N.ADC_DOUT, BUSY: N.BUSY, DIN: N.ADC_DIN, CS: N.ADC_CS, DCLK: N.ADC_DCLK } }), jsx(PZ254V_12_6P, { name: "J10", schX: -11.5, schY: 1.5, schWidth: "4mm", schHeight: "4.8mm", pcbX: -8, pcbY: -17, pcbRotation: 180, connections: { pin1: N.AIN0, pin2: N.AIN1, pin3: N.AIN2, pin4: N.AIN3, pin5: N.GND, pin6: N.GND } }), jsx("resistor", { name: "R23", resistance: "49.9ohm", footprint: "0402", manufacturerPartNumber: "CRCW040249R9FKED", supplierPartNumbers: { jlcpcb: ["C25175"] }, schX: 5.2, schY: 5.0, pcbX: 8.0, pcbY: 10.5, connections: { pin1: N.SCLK, pin2: N.ADC_DCLK } }), jsx("resistor", { name: "R24", resistance: "49.9ohm", footprint: "0402", manufacturerPartNumber: "CRCW040249R9FKED", supplierPartNumbers: { jlcpcb: ["C25175"] }, schX: 8.0, schY: 5.0, pcbX: 8.0, pcbY: 8.5, connections: { pin1: N.CS, pin2: N.ADC_CS } }), jsx("resistor", { name: "R25", resistance: "49.9ohm", footprint: "0402", manufacturerPartNumber: "CRCW040249R9FKED", supplierPartNumbers: { jlcpcb: ["C25175"] }, schX: 5.2, schY: 3.0, pcbX: 6.2, pcbY: 2.0, connections: { pin1: N.SDI, pin2: N.ADC_DIN } }), jsx("resistor", { name: "R26", resistance: "49.9ohm", footprint: "0402", manufacturerPartNumber: "CRCW040249R9FKED", supplierPartNumbers: { jlcpcb: ["C25175"] }, schX: 8.0, schY: 3.0, pcbX: 3.8, pcbY: 7.0, pcbRotation: 90, connections: { pin1: N.SDO, pin2: N.ADC_DOUT } }), jsx("resistor", { name: "R21", resistance: "10kohm", footprint: "0402", manufacturerPartNumber: "CRCW040210K0FKED", supplierPartNumbers: { jlcpcb: ["C71617"] }, schX: 10.8, schY: 1.3, pcbX: 11.7, pcbY: 0.5, connections: { pin1: N.SHDN, pin2: N.VDD } }), jsx("resistor", { name: "R16", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: -7, schY: 5.3, pcbX: 8.0, pcbY: 7.2, connections: { pin1: N.VDD, pin2: N.IDD } }), jsx(PEC02SAAN, { name: "J6", displayName: "J6 DNP", doNotPlace: true, schX: -10, schY: 5.3, pcbX: 4.4, pcbY: 12.4, pcbRotation: 90, connections: { pin1: N.IDD, pin2: N.VDD } }), jsx("capacitor", { name: "C16", capacitance: "4.7uF", footprint: "1206", manufacturerPartNumber: "F931A475KAA", supplierPartNumbers: { jlcpcb: ["C114778"] }, schX: -7, schY: 2.8, pcbX: 9.0, pcbY: 3.5, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.GND } }), jsx("capacitor", { name: "C17", capacitance: "0.1uF", footprint: "0603", manufacturerPartNumber: "06033D104KAT2A", supplierPartNumbers: { jlcpcb: ["C115867"] }, schX: -4.5, schY: 2.8, pcbX: 6.0, pcbY: 5.0, connections: { pin1: N.VDD, pin2: N.GND } }), jsx("capacitor", { name: "C23", capacitance: "0.1uF", footprint: "0603", manufacturerPartNumber: "06033D104KAT2A", supplierPartNumbers: { jlcpcb: ["C115867"] }, schX: -4.5, schY: -2.8, pcbX: -0.5, pcbY: -5.5, connections: { pin1: N.VREF, pin2: N.GND } }), jsx("capacitor", { name: "C24", capacitance: "1uF", footprint: "0603", manufacturerPartNumber: "C1608X5R1H105K080AB", supplierPartNumbers: { jlcpcb: ["C2858495"] }, schX: -2, schY: -2.8, pcbX: -0.5, pcbY: -7.2, connections: { pin1: N.VREF, pin2: N.GND } }), jsx("testpoint", { name: "TP8", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 4.5, schY: 6.0, pcbX: 11.0, pcbY: 9.4, connections: { pin1: N.SCLK } }), jsx("testpoint", { name: "TP9", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 6.0, schY: 6.0, pcbX: 11.1, pcbY: 6.6, connections: { pin1: N.CS } }), jsx("testpoint", { name: "TP10", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 7.5, schY: 6.0, pcbX: 11.5, pcbY: 4.6, connections: { pin1: N.SDI } }), jsx("testpoint", { name: "TP11", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 9.0, schY: 6.0, pcbX: 14.0, pcbY: -3.4, connections: { pin1: N.SDO } }), jsx("testpoint", { name: "TP12", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 10.5, schY: 6.0, pcbX: 16.3, pcbY: -3.4, connections: { pin1: N.BUSY } }), jsx("testpoint", { name: "TP13", footprintVariant: "pad", padShape: "circle", padDiameter: "1.2mm", schX: 12.0, schY: 6.0, pcbX: 7.9, pcbY: 0.7, connections: { pin1: N.VDD } }), jsx(REF5045AQDRQ1, { name: "U9", schX: -1, schY: -6.8, schWidth: "4.5mm", schHeight: "4.3mm", pcbX: 4.8, pcbY: -9.8, noConnect: ["DNC1", "DNC2", "NC", "TEMP", "pin5"], connections: { VIN: N.VDD, GND: N.GND, VOUT: N.VREF45_RAW } }), jsx("capacitor", { name: "C25", capacitance: "10uF", footprint: "0805", manufacturerPartNumber: "C2012X5R1E106K125AB", supplierPartNumbers: { jlcpcb: ["C15850"] }, schX: -6, schY: -6.8, pcbX: 9.5, pcbY: -16.5, connections: { pin1: N.VDD, pin2: N.GND } }), jsx("capacitor", { name: "C26", capacitance: "1uF", footprint: "0603", manufacturerPartNumber: "C1608X5R1H105K080AB", supplierPartNumbers: { jlcpcb: ["C2858495"] }, schX: 3.0, schY: -7.8, pcbX: 3.5, pcbY: -4.4, connections: { pin1: N.VREF45_RAW, pin2: N.GND } }), jsx("capacitor", { name: "C27", capacitance: "1uF", footprint: "0603", manufacturerPartNumber: "C1608X5R1H105K080AB", supplierPartNumbers: { jlcpcb: ["C2858495"] }, schX: 5.3, schY: -7.8, pcbX: 8.8, pcbY: -13.9, pcbRotation: 90, connections: { pin1: N.VREF45_RAW, pin2: N.GND } }), jsx("resistor", { name: "R31", resistance: "0ohm", footprint: "0603", manufacturerPartNumber: "CRCW06030000Z0EA", supplierPartNumbers: { jlcpcb: ["C844915"] }, schX: 4.0, schY: -5.4, pcbX: 8.0, pcbY: -4.2, connections: { pin1: N.VREF45_RAW, pin2: N.VREF45_FILTERED } }), jsx(PEC03SAAN, { name: "J13", schX: 8.5, schY: -6, pcbX: 7.6, pcbY: -1.8, connections: { pin1: N.VDD, pin2: N.VREF, pin3: N.VREF45_RAW } }), jsx("capacitor", { name: "C30", capacitance: "10uF", footprint: "1206", manufacturerPartNumber: "TAJA106M010RNJ", supplierPartNumbers: { jlcpcb: ["C129240"] }, schX: 6.5, schY: -5.4, pcbX: 11.5, pcbY: -6.7, pcbRotation: 90, connections: { pin1: N.VREF45_FILTERED, pin2: N.GND } }), jsx(PZ254V_12_4P, { name: "J15", schX: 8.0, schY: -1.5, schWidth: "3.8mm", schHeight: "3.5mm", pcbX: 0, pcbY: -17.1, connections: { pin1: N.AIN3, pin2: N.DIVIDER, pin3: N.GND, pin4: N.DIVIDER_BOTTOM } }), jsx("resistor", { name: "R35", resistance: "68.1kohm", footprint: "0402", manufacturerPartNumber: "CRCW040268K1FKED", supplierPartNumbers: { jlcpcb: ["C25819"] }, schX: 8.0, schY: 2.0, pcbX: 4.2, pcbY: -17.2, pcbRotation: 90, connections: { pin1: N.VDD, pin2: N.DIVIDER } }), jsx("resistor", { name: "R36", resistance: "100kohm", footprint: "0402", manufacturerPartNumber: "CRCW0402100KFKED", supplierPartNumbers: { jlcpcb: ["C25741"] }, schX: 10.0, schY: 2.0, pcbX: 6.0, pcbY: -17.2, pcbRotation: 90, connections: { pin1: N.DIVIDER, pin2: N.DIVIDER_BOTTOM } })] }), jsx("copperpour", { name: "GND_BOTTOM", layer: "bottom", connectsTo: N.GND, padMargin: "0.25mm", traceMargin: "0.2mm", boardEdgeMargin: "0.3mm" })] }));
}
export { Circuit as default };
Related Packages
More from this authorabse/keyboard-utilsBased on the code provided, here's a concise summary of the electronic component:
A keyboard utility library for parsing and generating keyboard layouts using the Keyboard Layout Editor (KLE) JSON format, with support for generating key matrices, reference designators, and diode routing for keyboard PCBs.
Key features:
- Parses KLE JSON layouts into key coordinate and metadata objects
- Supports various keyboard layouts (60%, ANSI, ISO, Ergodox, etc.)
- Generates unique reference designators for keys
- Provides utility for adding diode routing in key matrices
- TypeScript-based with React and tscircuit integration
The library allows keyboard designers to easily convert layout designs into structured, machine-readable keyboard specifications.
Similar packagemohan-bee/speakerThis code defines configurable 3D models and PCB footprints for various electronic components, including a battery charger IC, a dual Hall sensor, a dual power switch, and a voltage regulator, with detailed pinouts, footprints, and CAD models for schematic and physical design.
Discover something newShiboSoftwareDev/f1c100s-linux-gameboyRestores PCB assembly metadata by assigning part numbers, managing 3D CAD models and orientations, removing test-point bodies, and validating top-side SMT solder-paste features.