ShiboSoftwareDev/usb-pd-quad-dc-motor-controller
USB‑C USB‑PD–powered ESP32‑C3 controller with protected data, 3.3‑V regulation, and dual DRV8847 H‑bridges driving four current-limited brushed DC motors with status indication and protection.
- Version
- 1.0.0
- License
- unset
- Stars
- 0
__snapshots__/index.circuit-3d.snap.png
A text preview is not available for this file.
Related Packages
More from this authorShiboSoftwareDev/nema8-20mm-usbc-pd-controllerA 20×20 mm four-layer USB‑C PD stepper motor controller PCB using a CH32X035 MCU, TMC2209 driver, protected power inputs, USB data/boot interface, 3.3 V regulation, ESD/TVS protection, current-sense circuitry, and NEMA‑8 motor outputs.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newhrithik18k/Chatting-DeviceThis code defines React components representing surface-mount voltage regulator and resistor chips with specified pin layouts, footprints, and 3D CAD models for electronic hardware design.