ShiboSoftwareDev/solar-battery-charger
This code defines various surface-mount and through-hole electronic components (like diodes, voltage regulators, and ICs) with detailed footprints, 3D models, and pin configurations for PCB design.
- Version
- 1.0.2
- License
- unset
- Stars
- 0
index.circuit.tsx
PCB
Schematic
import type { ChipProps } from "@tscircuit/props"
import { B2B_PH_SM4_TBT_LF__SN_ } from "./imports/B2B_PH_SM4_TBT_LF__SN_"
import { B5819W_SL } from "./imports/B5819W_SL"
import { BQ24650RVAR } from "./imports/BQ24650RVAR"
import { CL10A106MA8NRNC } from "./imports/CL10A106MA8NRNC"
import { CL31A107MQHNNNE } from "./imports/CL31A107MQHNNNE"
import { DMG3404L_7 } from "./imports/DMG3404L_7"
import { LT1129CS8_3_3_PBF } from "./imports/LT1129CS8_3_3_PBF"
import { MCP73113T_06SI_MF } from "./imports/MCP73113T_06SI_MF"
import { SPH202012H100MT } from "./imports/SPH202012H100MT"
import { STC3117IJT } from "./imports/STC3117IJT"
const p = (x: number, y: number, pcbRotation = 0) => ({
pcbX: Number((x - 120.2).toFixed(3)),
pcbY: Number((79 - y).toFixed(3)),
pcbRotation,
})
const refRect = (x1: number, y1: number, x2: number, y2: number) => ({
width: `${x1}mm`,
height: `${y1}mm`,
pcbX: `${x2}mm`,
pcbY: `${y2}mm`,
})
const edgeHole = (x: number, y: number) => ({
radius: "0.9mm",
pcbX: `${Number((x - 120.2).toFixed(3))}mm`,
pcbY: `${Number((79 - y).toFixed(3))}mm`,
})
const referenceDiodePinLabels = {
pin1: ["CATHODE"],
pin2: ["ANODE"],
} as const
const jlcpcb = (partNumber: string) => ({
supplierPartNumbers: {
jlcpcb: [partNumber],
},
})
const ReferenceDiode0201 = (
props: ChipProps<typeof referenceDiodePinLabels>,
) => (
<chip
pinLabels={referenceDiodePinLabels}
manufacturerPartNumber="TPMEG3005AESFYL"
{...jlcpcb("C22435167")}
footprint={
<footprint>
<smtpad portHints={["pin1"]} pcbX="-0.32mm" pcbY="0mm" width="0.46mm" height="0.4mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0.32mm" pcbY="0mm" width="0.46mm" height="0.4mm" shape="rect" />
<silkscreenpath route={[{ x: -0.3, y: -0.15 }, { x: -0.3, y: 0.15 }]} />
<silkscreenpath route={[{ x: -0.2, y: -0.15 }, { x: -0.2, y: 0.15 }]} />
<silkscreenpath route={[{ x: -0.3, y: 0.15 }, { x: 0.3, y: 0.15 }]} />
<silkscreenpath route={[{ x: -0.3, y: -0.15 }, { x: 0.3, y: -0.15 }]} />
<courtyardoutline
outline={[
{ x: -0.7, y: 0.35 },
{ x: 0.7, y: 0.35 },
{ x: 0.7, y: -0.35 },
{ x: -0.7, y: -0.35 },
{ x: -0.7, y: 0.35 },
]}
/>
</footprint>
}
{...props}
/>
)
const ModulePad = ({
name,
label,
pcbX,
pcbY,
side,
}: {
name: string
label: string
pcbX: number
pcbY: number
side: "left" | "right"
}) => {
const padX = side === "left" ? -0.5 : 0.5
return (
<chip
name={name}
pcbX={pcbX}
pcbY={pcbY}
footprint={
<footprint>
<smtpad
layer="top"
shape="rect"
pcbX={`${padX}mm`}
pcbY="0mm"
width="2mm"
height="6mm"
portHints={["pin1"]}
/>
<smtpad
layer="bottom"
shape="rect"
pcbX={`${padX}mm`}
pcbY="0mm"
width="2mm"
height="6mm"
portHints={["pin1"]}
/>
</footprint>
}
pinLabels={{ pin1: label }}
/>
)
}
export default () => (
<board
width="34.8mm"
height="30mm"
autorouterVersion="v6"
layers={2}
minViaPadDiameter={0.45}
minViaHoleDiameter={0.3}
>
<autoroutingphase phaseIndex={1} connections={["IC1.B2"]} />
<copperpour connectsTo="net.GND" layer="top" clearance="0.15mm" />
<copperpour connectsTo="net.GND" layer="bottom" clearance="0.15mm" />
<cutout shape="rect" {...refRect(2.4, 1.1, -16.2, 7.5)} />
<cutout shape="rect" {...refRect(2.4, 1.1, -16.2, 0)} />
<cutout shape="rect" {...refRect(2.4, 1.1, -16.2, -7.5)} />
<cutout shape="rect" {...refRect(2.4, 1.1, 16.2, 7.5)} />
<cutout shape="rect" {...refRect(2.4, 1.1, 16.2, 0)} />
<cutout shape="rect" {...refRect(2.4, 1.1, 16.2, -7.5)} />
<cutout shape="circle" {...edgeHole(102.8, 67.7)} />
<cutout shape="circle" {...edgeHole(102.9, 75.2)} />
<cutout shape="circle" {...edgeHole(102.9, 82.6)} />
<cutout shape="circle" {...edgeHole(102.8, 90.2)} />
<cutout shape="circle" {...edgeHole(137.4, 67.7)} />
<cutout shape="circle" {...edgeHole(137.6, 75.2)} />
<cutout shape="circle" {...edgeHole(137.6, 82.8)} />
<cutout shape="circle" {...edgeHole(137.5, 90.2)} />
<ModulePad name="J8" label="VIN" pcbX={-15.7} pcbY={11.25} side="left" />
<ModulePad name="J1" label="nCE" pcbX={-15.7} pcbY={3.75} side="left" />
<ModulePad name="J6" label="ON_OFF" pcbX={-15.7} pcbY={-3.75} side="left" />
<ModulePad name="J7" label="ALM" pcbX={-15.7} pcbY={-11.25} side="left" />
<ModulePad name="J2" label="VOUT" pcbX={15.7} pcbY={11.25} side="right" />
<ModulePad name="J3" label="GND" pcbX={15.7} pcbY={3.75} side="right" />
<ModulePad name="J5" label="SDA" pcbX={15.7} pcbY={-3.75} side="right" />
<ModulePad name="J4" label="SCL" pcbX={15.7} pcbY={-11.25} side="right" />
<B2B_PH_SM4_TBT_LF__SN_ name="SLPWR1" {...p(112.2, 71)} />
<B2B_PH_SM4_TBT_LF__SN_ name="SLPWR2" {...p(128.2, 71)} />
<BQ24650RVAR name="U3" {...p(112.2, 86)} />
<MCP73113T_06SI_MF name="U2" {...p(129.2, 82, 270)} />
<STC3117IJT name="IC1" {...p(130, 76.8, 270)} />
<LT1129CS8_3_3_PBF name="U1" {...p(122.6, 89.8)} />
<DMG3404L_7 name="Q1" {...p(117, 78.2, 90)} />
<DMG3404L_7 name="Q2" {...p(120.6, 78.2, 90)} />
<DMG3404L_7 name="Q3" {...p(109, 78.3, 270)} />
<resistor name="R1" resistance="100k" footprint="0201" {...jlcpcb("C270364")} {...p(122, 84.38, 270)} />
<resistor name="R2" resistance="499k" footprint="0201" {...jlcpcb("C138138")} {...p(121.55, 81.1, 270)} />
<resistor name="R3" resistance="499k" footprint="0201" {...jlcpcb("C138138")} {...p(110.6, 82.5, 270)} />
<resistor name="R4" resistance="36k" footprint="0201" {...jlcpcb("C295796")} {...p(109.2, 84, 270)} />
<resistor name="R5" resistance="2ohm" footprint="0201" {...jlcpcb("C240147")} {...p(112.6, 76, 180)} />
<resistor name="R6" resistance="10ohm" footprint="0201" {...jlcpcb("C270817")} {...p(114, 79.7, 180)} />
<resistor name="R7" resistance="1k" footprint="0201" {...jlcpcb("C270365")} {...p(129.3, 86, 270)} />
<resistor name="R8" resistance="1k" footprint="0201" {...jlcpcb("C270365")} {...p(131.8, 86.2, 90)} />
<resistor name="R9" resistance="1k" footprint="0201" {...jlcpcb("C270365")} {...p(126.6, 75.2, 180)} />
<resistor name="R10" resistance="1k" footprint="0201" {...jlcpcb("C270365")} {...p(108.9, 88.8, 270)} />
<resistor name="R11" resistance="1k" footprint="0201" {...jlcpcb("C270365")} {...p(108, 85.2, 270)} />
<resistor name="RS1" resistance="0.005ohm" footprint="0201" {...jlcpcb("C2981420")} {...p(131.5, 75.2)} />
<resistor name="RSR1" resistance="0.02ohm" footprint="0201" {...jlcpcb("C76748")} {...p(119.95, 81.1, 90)} />
<capacitor name="C1" capacitance="2.2uF" footprint="0201" {...jlcpcb("C319184")} {...p(111, 76, 180)} />
<capacitor name="C2" capacitance="1uF" footprint="0201" {...jlcpcb("C53067")} {...p(113, 83, 90)} />
<capacitor name="C3" capacitance="1uF" footprint="0201" {...jlcpcb("C53067")} {...p(127.4, 76.2, 180)} />
<capacitor name="C4" capacitance="1uF" footprint="0201" {...jlcpcb("C53067")} {...p(115.75, 85.8, 270)} />
<capacitor name="C5" capacitance="0.1uF" footprint="0201" {...jlcpcb("C76928")} {...p(114.5, 82.9)} />
<CL10A106MA8NRNC name="C6" {...p(113, 81.2)} />
<capacitor name="C7" capacitance="0.1uF" footprint="0201" {...jlcpcb("C76928")} {...p(117.62, 83.7, 180)} />
<CL10A106MA8NRNC name="C8" {...p(120.3, 83.68, 270)} />
<capacitor name="C9" capacitance="4.7uF" footprint="0201" {...jlcpcb("C335103")} {...p(118.5, 85.08, 270)} />
<capacitor name="C10" capacitance="22pF" footprint="0201" {...jlcpcb("C57783")} {...p(122.6, 81.98, 270)} />
<capacitor name="C11" capacitance="220nF" footprint="0201" {...jlcpcb("C76932")} {...p(125.12, 75.2, 180)} />
<capacitor name="Cin1" capacitance="22pF" footprint="0201" {...jlcpcb("C57783")} {...p(131.8, 80.6, 90)} />
<capacitor name="Cout1" capacitance="22pF" footprint="0201" {...jlcpcb("C57783")} {...p(131.6, 79.0, 180)} />
<CL31A107MQHNNNE name="C_VOLT1" {...p(127.2, 88.725, 90)} />
<CL31A107MQHNNNE name="C_VOLT2" {...p(114.7, 91.45, 90)} />
<SPH202012H100MT name="L1" {...p(117.52, 81.7, 180)} />
<SPH202012H100MT name="L2" {...p(111.8, 90.3, 270)} />
<ReferenceDiode0201 name="D1" {...p(114.8, 78.6, 90)} />
<ReferenceDiode0201 name="D2" {...p(114.95, 86.95, 90)} />
<ReferenceDiode0201 name="D3" {...p(133.2, 76.1, 270)} />
<B5819W_SL name="D5" {...p(117.6, 89.25, 270)} />
<ReferenceDiode0201 name="D4" {...p(128.6, 84.5, 180)} />
<ReferenceDiode0201 name="D6" {...p(109.7, 90.15, 90)} />
<ReferenceDiode0201 name="D7" {...p(107, 84, 90)} />
<pcbnotetext pcbX={2.8} pcbY={9} text="Battery Connector" fontSize={0.7} anchorAlignment="center" pcbRotation={270} />
<pcbnotetext pcbX={-2.5} pcbY={10.2} text="Solar Panel" fontSize={0.7} anchorAlignment="center" pcbRotation={90} />
<pcbnotetext pcbX={13.4} pcbY={11.2} text="Vout" fontSize={0.5} anchorAlignment="center" pcbRotation={90} />
<pcbnotetext pcbX={13.4} pcbY={4} text="GND" fontSize={0.5} anchorAlignment="center" pcbRotation={90} />
<pcbnotetext pcbX={13.2} pcbY={-3.7} text="SDA" fontSize={0.5} anchorAlignment="center" pcbRotation={90} />
<pcbnotetext pcbX={13.2} pcbY={-10.7} text="SCL" fontSize={0.5} anchorAlignment="center" pcbRotation={90} />
<pcbnotetext pcbX={-13.4} pcbY={-11.3} text="Alarm" fontSize={0.5} anchorAlignment="center" pcbRotation={270} />
<pcbnotetext pcbX={-13.4} pcbY={-3.5} text="Power ON/OFF" fontSize={0.5} anchorAlignment="center" pcbRotation={270} />
<pcbnotetext pcbX={-13.4} pcbY={4.6} text="nCE" fontSize={0.5} anchorAlignment="center" pcbRotation={270} />
<pcbnotetext pcbX={-13.3} pcbY={10.3} text="Vin" fontSize={0.5} anchorAlignment="center" pcbRotation={270} />
<chip
name="LOGO1"
pcbX={0.1}
pcbY={-0.2}
pcbRotation={180}
layer="bottom"
footprint={
<footprint>
<silkscreentext text="OSHW" fontSize="2.4mm" anchorAlignment="center" />
</footprint>
}
/>
<trace from="SLPWR1.pin1" to="net.VCC" />
<trace from="SLPWR1.pin2" to="net.GND" />
<trace from="SLPWR2.pin1" to="net.BATD" />
<trace from="SLPWR2.pin2" to="net.CS" />
<trace from="U3.VCC" to="net.VCC" />
<trace from="U3.MPPSET" to="net.MPPSET" />
<trace from="U3.STAT1" to="net.STAT_1" />
<trace from="U3.STAT2" to="net.STAT_2" />
<trace from="U3.VREF" to="net.VREF" />
<trace from="U3.TERM_EN" to="net.VREF" />
<trace from="U3.VFB" to="net.VFB" />
<trace from="U3.SRN" to="net.BATTERY" />
<trace from="U3.SRP" to="net.SRP" />
<trace from="U3.GND" to="net.GND" />
<trace from="U3.REGN" to="net.REGN" />
<trace from="U3.LODRV" to="net.LODRV" />
<trace from="U3.PH" to="net.PH" />
<trace from="U3.HIDRV" to="net.HIDRV" />
<trace from="U3.BTST" to="net.BTST" />
<trace from="U3.EP" to="net.GND" />
<trace from="Q1.G" to="net.HIDRV" />
<trace from="Q1.S" to="net.PH" />
<trace from="Q1.D" to="net.VCC_BOOT" />
<trace from="Q2.G" to="net.LODRV" />
<trace from="Q2.S" to="net.GND" />
<trace from="Q2.D" to="net.PH" />
<trace from="Q3.G" to="net.nCE" />
<trace from="Q3.S" to="net.GND" />
<trace from="Q3.D" to="net.MPPSET" />
<trace from="R3.pin1" to="net.VCC" />
<trace from="R3.pin2" to="net.MPPSET" />
<trace from="R4.pin1" to="net.MPPSET" />
<trace from="R4.pin2" to="net.GND" />
<trace from="R5.pin1" to="net.VCC" />
<trace from="R5.pin2" to="net.C1_FILTER" />
<trace from="C1.pin1" to="net.C1_FILTER" />
<trace from="C1.pin2" to="net.GND" />
<trace from="R6.pin1" to="net.VCC_BOOT" />
<trace from="R6.pin2" to="net.VCC" />
<trace from="C2.pin1" to="net.VCC" />
<trace from="C2.pin2" to="net.GND" />
<trace from="C6.pin1" to="net.VCC_BOOT" />
<trace from="C6.pin2" to="net.GND" />
<trace from="D1.pin1" to="net.VCC_BOOT" />
<trace from="D1.pin2" to="net.VCC" />
<trace from="U3.REGN" to="D2.pin2" />
<trace from="D2.pin2" to="C4.pin1" />
<trace from="C4.pin2" to="net.GND" />
<trace from="C5.pin1" to="net.PH" />
<trace from="U3.BTST" to="D2.pin1" />
<trace from="D2.pin1" to="C5.pin2" />
<trace from="L1.pin1" to="net.SRP" />
<trace from="L1.pin2" to="net.PH" />
<trace from="RSR1.pin1" to="net.SRP" />
<trace from="RSR1.pin2" to="net.BATTERY" />
<trace from="C7.pin1" to="net.BATTERY" />
<trace from="C7.pin2" to="net.SRP" />
<trace from="C8.pin1" to="net.BATTERY" />
<trace from="C8.pin2" to="net.GND" />
<trace from="C9.pin1" to="net.BATTERY" />
<trace from="C9.pin2" to="net.GND" />
<trace from="R2.pin1" to="net.BATTERY" />
<trace from="R2.pin2" to="net.VFB" />
<trace from="R1.pin1" to="net.VFB" />
<trace from="R1.pin2" to="net.GND" />
<trace from="C10.pin1" to="net.BATTERY" />
<trace from="C10.pin2" to="net.VFB" />
<trace from="D7.pin1" to="net.STAT1_LED" />
<trace from="D7.pin2" to="net.VCC" />
<trace from="R11.pin1" to="net.STAT_1" />
<trace from="R11.pin2" to="net.STAT1_LED" />
<trace from="D6.pin1" to="net.STAT2_LED" />
<trace from="D6.pin2" to="net.VCC" />
<trace from="R10.pin1" to="net.STAT_2" />
<trace from="R10.pin2" to="net.STAT2_LED" />
<trace from="U2.VDD1" to="net.BATTERY" />
<trace from="U2.VDD2" to="net.BATTERY" />
<trace from="U2.VBAT1" to="net.BATD" />
<trace from="U2.VBAT2" to="net.BATD" />
<trace from="U2.STAT" to="net.U2_STAT" />
<trace from="U2.VSS1" to="net.GND" />
<trace from="U2.VSS2" to="net.GND" />
<trace from="U2.PROG" to="net.U2_PROG" />
<trace from="D4.pin1" to="net.U2_STAT_LED" />
<trace from="D4.pin2" to="net.BATTERY" />
<trace from="R7.pin1" to="net.U2_STAT" />
<trace from="R7.pin2" to="net.U2_STAT_LED" />
<trace from="R8.pin1" to="net.U2_PROG" />
<trace from="R8.pin2" to="net.GND" />
<trace from="IC1.A2" to="net.SDA" />
<trace from="IC1.A3" to="net.GND" />
<trace from="IC1.B1" to="net.BATD" />
<trace
name="IC1_B2_SCL_CENTER_PAD"
from="IC1.B2"
to="net.SCL"
routingPhaseIndex={1}
thickness="0.06mm"
/>
<trace from="IC1.B3" to="net.CS" />
<trace from="IC1.C1" to="net.IC1_VIN" />
<trace from="IC1.C2" to="net.BATD" />
<trace from="IC1.C3" to="net.ALM" />
<trace from="R9.pin1" to="net.BATD" />
<trace from="R9.pin2" to="net.IC1_VIN" />
<trace from="C11.pin1" to="net.IC1_VIN" />
<trace from="C11.pin2" to="net.GND" />
<trace from="RS1.pin1" to="net.CS" />
<trace from="RS1.pin2" to="net.GND" />
<trace from="C3.pin1" to="net.BATD" />
<trace from="C3.pin2" to="net.GND" />
<trace from="Cout1.pin1" to="net.GND" />
<trace from="Cout1.pin2" to="net.BATD" />
<trace from="Cin1.pin1" to="net.GND" />
<trace from="Cin1.pin2" to="net.BATTERY" />
<trace from="D3.pin1" to="net.BATTERY" />
<trace from="D3.pin2" to="net.VIN_RAW" />
<trace from="U1.OUTPUT" to="net.VOUT" />
<trace from="U1.SENSE" to="net.D5_SW" />
<trace from="U1.GND1" to="net.GND" />
<trace from="U1.NC" to="net.D5_SW" />
<trace from="U1.SHDN" to="net.ON_OFF" />
<trace from="U1.GND2" to="net.GND" />
<trace from="U1.GND3" to="net.GND" />
<trace from="U1.VIN" to="net.BATD" />
<trace from="L2.pin1" to="net.D5_SW" />
<trace from="L2.pin2" to="net.VOUT" />
<trace from="D5.pin1" to="net.D5_SW" />
<trace from="D5.pin2" to="net.GND" />
<trace from="C_VOLT1.pin1" to="net.GND" />
<trace from="C_VOLT1.pin2" to="net.BATD" />
<trace from="C_VOLT2.pin1" to="net.GND" />
<trace from="C_VOLT2.pin2" to="net.VOUT" />
<trace from="J8.VIN" to="net.VIN_RAW" />
<trace from="J1.nCE" to="net.nCE" />
<trace from="J6.ON_OFF" to="net.ON_OFF" />
<trace from="J7.ALM" to="net.ALM" />
<trace from="J2.VOUT" to="net.VOUT" />
<trace from="J3.GND" to="net.GND" />
<trace from="J5.SDA" to="net.SDA" />
<trace from="J4.SCL" to="net.SCL" />
</board>
)
Related Packages
More from this authorShiboSoftwareDev/lp-msp430fr2476This design implements a microcontroller-based development board featuring an MSP430FR2476 target MCU with associated power regulation, USB host interface with ESD protection, multiple headers for peripherals and BoosterPacks, and integrated status LEDs and sensors.
Similar packagemohan-bee/speakerThis code defines configurable 3D models and PCB footprints for various electronic components, including a battery charger IC, a dual Hall sensor, a dual power switch, and a voltage regulator, with detailed pinouts, footprints, and CAD models for schematic and physical design.