ShiboSoftwareDev/f1c100s-linux-stepper-controller
A four-layer Linux motor-control carrier built around an Allwinner F1C100S SoC, USB‑C, SPI flash, multi-rail power regulation, DRV8825 stepper-driver stage with protection/current sensing, temperature monitoring, and external I/O connectors.
- Version
- 0.1.1
- License
- unset
- Stars
- 0
imports/DRV8825PWPR.tsx
import type { ChipProps } from "@tscircuit/props"
const pinLabels = {
pin1: ["CP1"],
pin2: ["CP2"],
pin3: ["VCP"],
pin4: ["VMA"],
pin5: ["AOUT1"],
pin6: ["ISENA"],
pin7: ["AOUT2"],
pin8: ["BOUT2"],
pin9: ["ISENB"],
pin10: ["BOUT1"],
pin11: ["VMB"],
pin12: ["AVREF"],
pin13: ["BVREF"],
pin14: ["GND1"],
pin15: ["V3P3OUT"],
pin16: ["nRESET"],
pin17: ["nSLEEP"],
pin18: ["nFAULT"],
pin19: ["DECAY"],
pin20: ["DIR"],
pin21: ["NENBL", "nENBL"],
pin22: ["STEP"],
pin23: ["NC"],
pin24: ["MODE0"],
pin25: ["MODE1"],
pin26: ["MODE2"],
pin27: ["nHOME"],
pin28: ["GND2"],
pin29: ["pin29", "EP", "thermalpad"]
} as const
const pinAttributes = {
pin14: {requiresGround: true},
pin23: {doNotConnect: true},
pin28: {requiresGround: true},
pin29: {requiresGround: true}
} as const
export const DRV8825PWPR = (props: ChipProps<typeof pinLabels>) => {
return (
<chip
pinLabels={pinLabels}
pinAttributes={pinAttributes}
supplierPartNumbers={{
"jlcpcb": [
"C81582"
]
}}
manufacturerPartNumber="DRV8825PWPR"
footprint={<footprint>
<smtpad portHints={["pin1"]} pcbX="-4.225036mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin2"]} pcbX="-3.57505mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin3"]} pcbX="-2.925064mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin4"]} pcbX="-2.275078mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin5"]} pcbX="-1.625092mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin6"]} pcbX="-0.975106mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin7"]} pcbX="-0.324866mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin8"]} pcbX="0.32512mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin9"]} pcbX="0.975106mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin10"]} pcbX="1.625092mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin11"]} pcbX="2.275078mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin12"]} pcbX="2.925064mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin13"]} pcbX="3.57505mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin14"]} pcbX="4.225036mm" pcbY="-2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin28"]} pcbX="-4.225036mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin27"]} pcbX="-3.57505mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin26"]} pcbX="-2.925064mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin25"]} pcbX="-2.275078mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin24"]} pcbX="-1.625092mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin23"]} pcbX="-0.975106mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin22"]} pcbX="-0.324866mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin21"]} pcbX="0.32512mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin20"]} pcbX="0.975106mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin19"]} pcbX="1.625092mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin18"]} pcbX="2.275078mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin17"]} pcbX="2.925064mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin16"]} pcbX="3.57505mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin15"]} pcbX="4.225036mm" pcbY="2.865755mm" width="0.3430016mm" height="1.7314926mm" radius="0.1715008mm" shape="pill" />
<smtpad portHints={["pin29"]} pcbX="0mm" pcbY="-0.000127mm" width="5.5999888mm" height="3.0999938mm" shape="rect" />
<via pcbX="1.800098mm" pcbY="-1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="-0.599948mm" pcbY="-0.000127mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="0.599948mm" pcbY="-1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="-0.599948mm" pcbY="-1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="-0.599948mm" pcbY="1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="-1.800098mm" pcbY="-1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="-1.800098mm" pcbY="-0.000127mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="-1.800098mm" pcbY="1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="0.599948mm" pcbY="-0.000127mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="1.778mm" pcbY="-0.000127mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="0.599948mm" pcbY="1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<via pcbX="1.800098mm" pcbY="1.200023mm" outerDiameter="0.45mm" holeDiameter="0.3mm" layers={["top","bottom"]} connectsTo="pin29" tented="bottom_tented" />
<silkscreenpath route={[{"x":-4.926202999999987,"y":-1.7712690000000748},{"x":-4.926202999999987,"y":1.771523000000002},{"x":4.926202999999987,"y":1.771523000000002},{"x":4.926202999999987,"y":-1.7712690000000748},{"x":-4.926202999999987,"y":-1.7712690000000748}]} />
<silkscreencircle pcbX="-4.225036mm" pcbY="-1.018921mm" radius="0.150114mm" />
<silkscreencircle pcbX="-4.84886mm" pcbY="-2.865755mm" radius="0.150114mm" />
<silkscreentext text="{NAME}" pcbX="-0.0381mm" pcbY="4.556127mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-5.253799999999956,"y":3.8061270000000604},{"x":5.177599999999984,"y":3.8061270000000604},{"x":5.177599999999984,"y":-3.8058730000000196},{"x":-5.253799999999956,"y":-3.8058730000000196},{"x":-5.253799999999956,"y":3.8061270000000604}]} />
</footprint>}
cadModel={{
objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C81582.obj?uuid=8cb208170c6a49d2a22c82795805910d",
stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C81582.step?uuid=8cb208170c6a49d2a22c82795805910d",
pcbRotationOffset: 0,
modelOriginPosition: { x: -0.000012699999842880061, y: 0, z: -0.65 },
}}
{...props}
/>
)
}
Related Packages
More from this authorShiboSoftwareDev/lp-msp430fr2476This design implements a microcontroller-based development board featuring an MSP430FR2476 target MCU with associated power regulation, USB host interface with ESD protection, multiple headers for peripherals and BoosterPacks, and integrated status LEDs and sensors.
Similar packageAnasSarkiz/rp2040-usb-c-single-axis-dm542t-motion-controller--01a0e89cA USB‑C RP2040 controller board with external QSPI flash, crystal clock, regulated 3.3/1.1/5 V power, boost-converted motor-driver supply, protected USB and limit inputs, status LEDs, reset/boot switches, and AO3400A MOSFET outputs for stepper-control signals.
Discover something newimrishabh18/fitness_watchThis circuit integrates an ESP-12E microcontroller with various sensors and peripherals, including a AO3400A MOSFET for switching loads, to enable wireless control and sensor data processing.