MustafaMulla29/rp2040-bldc-motor-controller-new
73×72 mm 4-layer USB‑C PD (5/9/15/20 V) RP2040 controller PCB with protected power switching, MCT8329A sensorless BLDC three-phase MOSFET bridge, USB data/programming, onboard controls, and three motor outputs feeding a 2212 motor through rigid bullet adapters.
- Version
- 0.3.100
- License
- unset
- Stars
- 0
assembly/README.md
# 5/9/15/20 V USB-PD motor assembly
Run the root PCB checks, then `bun run assembly:build` and `bun run assembly:preview` from the parent project.
The board, motor, three original leads and rigid adapters are joined with a PD-power USB cable on J19 and USB DATA cable on J1. No battery, probe or charger assembly remains. The rigid adapter geometry uses upstream male/female bullets; its unpublished body dimensions remain labelled illustrative. External USB enclosures and cable lengths are representative.
The PCB export is hash-checked against fresh native and independent audits. This geometric preview does not demonstrate working motor firmware or bench-tested electrical performance. See `../docs/pd-only-design.md` and `vendor/README.md` for the circuit intent and the retained local assembly extensions.
Related Packages
More from this authorMustafaMulla29/MC-MP-symbolsThis code defines a 10mm x 10mm schematic diagram featuring two integrated circuit components ("MC" and "MP") with their respective physical symbols, including outer rings, lobed shapes, connection lines, and ports.
Similar packageAnasSarkiz/rp2040-bldc-servo-controllerRP2040-based motor-control board integrating a DRV8316 three-phase gate driver, AS5047P magnetic position sensor, USB-C power/communications, STUSB4500 USB-PD controller, SPI flash, and THVD1450 RS-485 transceiver.
Discover something newgokul/musegrowUSB‑C powered ESP32‑C3 controller board with regulated 3.3 V supply, USB ESD protection, buttons/status LEDs, ambient-light I²C sensing, and a 555-driven capacitive soil-moisture electrode.