AnasSarkiz/NEMA14_CH32X035G8U6

A NEMA stepper motor is shown with proposed M3 screws/spacers, four wired motor leads and splices, and a JST SHR-04V-S connector.

Version
1.12.2
License
ISC
Stars
0

imports/supplier/USBLC6_2SC6/USBLC6_2SC6.tsx

import React from "react"
const objPath = "https://raw.githubusercontent.com/AnasSarkiz/NEMA17_Controller/9bcde14e6865e6719d26c354127052890d848067/imports/supplier/USBLC6_2SC6/USBLC6_2SC6.obj"
const stepPath = "https://raw.githubusercontent.com/AnasSarkiz/NEMA17_Controller/9bcde14e6865e6719d26c354127052890d848067/imports/supplier/USBLC6_2SC6/USBLC6_2SC6.step"
import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["I1","O11"],
  pin2: ["GND"],
  pin3: ["I2","O21"],
  pin4: ["I3","O22"],
  pin5: ["VBUS"],
  pin6: ["I4","O12"]
} as const

const pinAttributes = {
  pin2: {requiresGround: true, mustBeConnected: true},
  pin5: {isPassive: true, mustBeConnected: true, shouldHaveDecouplingCapacitor: true, recommendedDecouplingCapacitorCapacitance: "100nF"},
  pin1: {isPassive: true},
  pin3: {isPassive: true},
  pin4: {isPassive: true},
  pin6: {isPassive: true}
} satisfies NonNullable<ChipProps["pinAttributes"]>

export const USBLC6_2SC6 = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C2687116"
  ]
}}
      manufacturerPartNumber="USBLC6-2SC6"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-0.94996mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.94996mm" pcbY="-1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.94996mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="-0.94996mm" pcbY="1.149096mm" width="0.532003mm" height="1.072007mm" shape="rect" />
<silkscreenpath route={[{"x":1.5391891999998961,"y":-0.8892031999998835},{"x":1.5391891999998961,"y":0.8892031999999972}]} />
<silkscreenpath route={[{"x":-1.5391892000000098,"y":-0.8892031999998835},{"x":-1.5391892000000098,"y":0.8892031999999972}]} />
<silkscreencircle pcbX="-1.668272mm" pcbY="-1.301496mm" radius="0.150114mm" />
<silkscreentext text="{NAME}" pcbX="-0.1524mm" pcbY="2.6764mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.6999843999999484,"y":1.9350994999999784},{"x":1.7000097999999753,"y":1.9350994999999784},{"x":1.7000097999999753,"y":-1.9350994999998647},{"x":-1.6999843999999484,"y":-1.9350994999998647},{"x":-1.6999843999999484,"y":1.9350994999999784}]} />
      </footprint>}
      cadModel={{
        objUrl: objPath,
        positionOffset: { x: (-0.0) * Math.cos(Number(props.pcbRotation ?? 0) * Math.PI / 180) - (0.0) * Math.sin(Number(props.pcbRotation ?? 0) * Math.PI / 180), y: (-0.0) * Math.sin(Number(props.pcbRotation ?? 0) * Math.PI / 180) + (0.0) * Math.cos(Number(props.pcbRotation ?? 0) * Math.PI / 180), z: 0 },
        stepUrl: stepPath,
        pcbRotationOffset: 90,
        modelOriginPosition: { x: -0.000012700000070253736, y: 0.000012700000070253736, z: -0.048939 },
      }}
      {...props}
    />
  )
}