AnasSarkiz/NEMA14_CH32X035G8U6

artifacts/top-assembly/assembly-fit-verification.json

PCB

Schematic

{
  "passed": true,
  "board_sha256": "91f2d285ad79b93d8c4d6a9dc2ddb92ade4b06c1737b69b99e54d52ad58e9727",
  "assembly_sha256": "e03bdf5e6c004c9c4088444a99d908dfd96453e28bf3f2ed48551c9bbbf03c59",
  "fitted_supplier_STEP_parts": 61,
  "conservative_USB_STEP_envelopes": [
    "J_PD",
    "J_DATA"
  ],
  "wire_entry_holes_checked_against_actual_exposed_housing": true,
  "wire_segments": 156,
  "nearby_wire_envelope_min_clearance_mm": 0.07999999999999902,
  "collisions": [],
  "PCB_records_preserved": true,
  "actual_hardware_JSCAD_geometry_and_placements_checked": true,
  "screw_centres_mm": [
    [
      -13,
      -13
    ],
    [
      -13,
      13
    ],
    [
      13,
      -13
    ],
    [
      13,
      13
    ]
  ],
  "screw_shaft_to_spacer_bore_radial_clearance_mm": 0.1,
  "spacer_to_PCB_surface_gap_mm": 0,
  "spacer_to_model_motor_surface_gap_mm": 0,
  "motor_rear_attachment_verified": false,
  "physical_assembly_tested": false,
  "limitations": [
    "Rear retention/thread engagement, rear shaft and encoder magnet/airgap remain unverified.",
    "Factory wire diameter and actual splice procurement require a sample; the drawing specifies bare 300 +/-10 mm leads but no gauge.",
    "Only the exposed stock housing outline is rendered; the concealed inserted stem and contact/latch tolerances are not modeled.",
    "Defined plug/tool/head dimensions are procurement bounds; real parts require qualification.",
    "Bottom encoder and its capacitors are DNP and excluded from fitted-part collision checks."
  ]
}