AnasSarkiz/NEMA14_CH32X035G8U6
A NEMA stepper motor is shown with proposed M3 screws/spacers, four wired motor leads and splices, and a JST SHR-04V-S connector.
- Version
- 1.12.2
- License
- ISC
- Stars
- 0
artifacts/jlcpcb-review/CAM-audit.json
{
"source_sha256": "91093c29c57c6bc89372215e67c44ac336f02760e6cb2c4ff1d932485ec6a95c",
"directory": "artifacts/jlcpcb-review/cam",
"parser_versions": {
"gerbonara": "1.5.0",
"pygerber": "2.4.3",
"shapely": "2.1.2"
},
"parser_compatibility": "Only LR right-angle aperture transforms and unambiguous split-line G85 slots are converted to equivalent G00/M15/G01/M16/G05 routing analytically. Original Gerbers independently rendered by PyGerber. Input CAM bytes remain unchanged.",
"files": {
"B_Cu.gbr": {
"sha256": "11ce39d6492bd73de55e1cd8925492daff9e5c4f0f90c83dcd65b2a34e4bdf21",
"objects": 2888,
"area_mm2": 783.2293937985227,
"bounds_mm": [
-17.15,
-17.15,
17.15,
17.15
],
"LR_applied": 0,
"warnings": []
},
"B_Mask.gbr": {
"sha256": "f49167e898ed60a88a3aec7f50af74cd8df3c6a2ad719d60a9946c87f411891d",
"objects": 58,
"area_mm2": 54.35339123950721,
"bounds_mm": [
-14.6,
-17.129891999999998,
14.6,
17.129891999999998
],
"LR_applied": 0,
"warnings": []
},
"B_Paste.gbr": {
"sha256": "9d9ccc677d66fcf98e79dd042c198efc255fe92c9c1c3c8ac518930993232299",
"objects": 0,
"area_mm2": 0.0,
"bounds_mm": [],
"LR_applied": 0,
"warnings": []
},
"B_SilkScreen.gbr": {
"sha256": "a6660a3f74ca92b1a4ae6572a1a046fd5e1107551739af3a28f9228a1e796686",
"objects": 21,
"area_mm2": 7.014240234313995,
"bounds_mm": [
-14.865822,
-3.955206,
2.464201,
3.955206
],
"LR_applied": 0,
"warnings": []
},
"Edge_Cuts.gbr": {
"sha256": "5a01b6a0398cba5adb2e957474149308b9c8a365e2de32831835cb3e22b63813",
"objects": 4,
"area_mm2": 6.999463298281626,
"bounds_mm": [
-17.525,
-17.525,
17.525,
17.525
],
"LR_applied": 0,
"warnings": []
},
"F_Cu.gbr": {
"sha256": "981461350c05fab1ced25991cf74d3431cbddf9c3f18f86e8d558a30f690b36b",
"objects": 2624,
"area_mm2": 733.1792885530161,
"bounds_mm": [
-17.15,
-17.240000000000002,
17.15,
17.204936
],
"LR_applied": 0,
"warnings": []
},
"F_Fab.gbr": {
"sha256": "f4b11ed1dec7618178a64d04fdedfd3319f050de0d55c10465f45fd69f45454d",
"objects": 591,
"area_mm2": 14.957980540967888,
"bounds_mm": [
-14.626994,
-14.039135,
15.038898000000001,
13.226998
],
"LR_applied": 0,
"warnings": []
},
"F_Mask.gbr": {
"sha256": "8a763b244e2fe985b9cb28d9b33447c279e305dbe8bed167599ced74310d30c9",
"objects": 337,
"area_mm2": 241.43934673160186,
"bounds_mm": [
-17.1350005,
-17.240000000000002,
17.149838,
17.204936
],
"LR_applied": 0,
"warnings": []
},
"F_Paste.gbr": {
"sha256": "1bac1478eb3e971e7435a305aa09af76780ec5143eae14f745c54081209342d4",
"objects": 246,
"area_mm2": 97.92743001587189,
"bounds_mm": [
-16.9235,
-17.032435,
16.974918,
17.032435
],
"LR_applied": 0,
"warnings": []
},
"F_SilkScreen.gbr": {
"sha256": "7c787ed9a1bb09806c04ed28c80900242e81da696f54f16bf1fbd1ade16a07bf",
"objects": 141,
"area_mm2": 95.6071975660295,
"bounds_mm": [
-17.399,
-17.399,
17.399,
17.399
],
"LR_applied": 0,
"warnings": []
},
"In1_Cu.gbr": {
"sha256": "abd1b302ea9493a3e9573ea48d40b3839a1de3f74dab5dd58e943c064fb83b43",
"objects": 1913,
"area_mm2": 850.9586105047579,
"bounds_mm": [
-17.15,
-17.15,
17.15,
17.15
],
"LR_applied": 0,
"warnings": []
},
"In2_Cu.gbr": {
"sha256": "2e8522f6fd17e80b500eef8dbcc84a9d6592394d52a01e7b9e63d0cb9a2d28fb",
"objects": 2422,
"area_mm2": 778.6026847037192,
"bounds_mm": [
-17.15,
-17.15,
17.15,
17.15
],
"LR_applied": 0,
"warnings": []
},
"drill-L1-L4.drl": {
"sha256": "41fbe232ca3d1146dd9728986735d75e6860590da7e869896a257642f187118f",
"objects": 261,
"G85_joined": 8,
"parser_notices": [
"<unknown>:14 \"G90\": G90 header statement found after end of header"
],
"tools_mm": {
"0.599999": 8,
"0.3": 253
}
},
"drill_npth.drl": {
"sha256": "1ced8080b345aa385b4d77bc3483fc3d276ad3dd46f192c784eabd7c0d362bd6",
"objects": 6,
"G85_joined": 0,
"parser_notices": [
"<unknown>:14 \"G90\": G90 header statement found after end of header"
],
"tools_mm": {
"3.2": 4,
"0.709981": 2
}
}
},
"issues": [],
"archive": {
"path": "/workspace/nema14-ch32-board/artifacts/jlcpcb-review/review-cam.zip",
"sha256": "3563aa77c30afc924a9d1b1c594289c31b4117e86f478462f13175063b04b0d8",
"extracted_bytes_verified": true,
"members": {
"B_Cu.gbr": "11ce39d6492bd73de55e1cd8925492daff9e5c4f0f90c83dcd65b2a34e4bdf21",
"B_Mask.gbr": "f49167e898ed60a88a3aec7f50af74cd8df3c6a2ad719d60a9946c87f411891d",
"B_Paste.gbr": "9d9ccc677d66fcf98e79dd042c198efc255fe92c9c1c3c8ac518930993232299",
"B_SilkScreen.gbr": "a6660a3f74ca92b1a4ae6572a1a046fd5e1107551739af3a28f9228a1e796686",
"Edge_Cuts.gbr": "5a01b6a0398cba5adb2e957474149308b9c8a365e2de32831835cb3e22b63813",
"F_Cu.gbr": "981461350c05fab1ced25991cf74d3431cbddf9c3f18f86e8d558a30f690b36b",
"F_Fab.gbr": "f4b11ed1dec7618178a64d04fdedfd3319f050de0d55c10465f45fd69f45454d",
"F_Mask.gbr": "8a763b244e2fe985b9cb28d9b33447c279e305dbe8bed167599ced74310d30c9",
"F_Paste.gbr": "1bac1478eb3e971e7435a305aa09af76780ec5143eae14f745c54081209342d4",
"F_SilkScreen.gbr": "7c787ed9a1bb09806c04ed28c80900242e81da696f54f16bf1fbd1ade16a07bf",
"In1_Cu.gbr": "abd1b302ea9493a3e9573ea48d40b3839a1de3f74dab5dd58e943c064fb83b43",
"In2_Cu.gbr": "2e8522f6fd17e80b500eef8dbcc84a9d6592394d52a01e7b9e63d0cb9a2d28fb",
"bom.csv": "9773e9edd9b4bfdd361912118f160b96ad9982a22747ec619ad46204413cf315",
"drill-L1-L4.drl": "41fbe232ca3d1146dd9728986735d75e6860590da7e869896a257642f187118f",
"drill_npth.drl": "1ced8080b345aa385b4d77bc3483fc3d276ad3dd46f192c784eabd7c0d362bd6",
"pick_and_place.csv": "1bc844b3e4e4ce9e1dc67b128a39c799881d1406f0cb0da7d836f832453ec90f"
}
},
"copper_comparison": {
"top": {
"missing_mm2": 0.0,
"extra_mm2": 0.0,
"tolerance_mm": 0.0002
},
"bottom": {
"missing_mm2": 0.0,
"extra_mm2": 0.0,
"tolerance_mm": 0.0002
},
"inner1": {
"missing_mm2": 0.0,
"extra_mm2": 0.0,
"tolerance_mm": 0.0002
},
"inner2": {
"missing_mm2": 0.0,
"extra_mm2": 0.0,
"tolerance_mm": 0.0002
}
},
"connectivity": {
"named_nets_checked": 50,
"shorts": [],
"opens": [],
"unconnected_pads": [],
"actual_copper_islands": 801,
"unassigned_islands": 30,
"no_connect_contacts": [],
"unassigned_island_details": [
{
"area_mm2": 0.23517627186496617,
"bounds_mm": [
2.050096,
-7.1392180000000005,
2.950094,
-6.859208
],
"layers": [
"top"
],
"no_connect_pads": [
"U_DRV.NC20"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
1.2500045,
2.101016,
1.9500035,
2.301016
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PC3"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
1.2500045,
2.499796,
1.9500035,
2.699796
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PC0"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
1.2500045,
3.299896,
1.9500035,
3.499896
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.CC2_UNUSED"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
2.3001039999999997,
3.8499964999999996,
2.500104,
4.5499955
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.CC1_UNUSED"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.17999910000099992,
"bounds_mm": [
4.959986499999999,
-11.4600005,
5.5599855,
-11.1600015
],
"layers": [
"top"
],
"no_connect_pads": [
"U_TEMP.ALERT"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.1399997999999995,
"bounds_mm": [
4.3001000000000005,
3.8499964999999996,
4.5001,
4.5499955
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PB12"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 2.1599916000080017,
"bounds_mm": [
-9.300008,
9.450032,
-7.500012,
10.650030000000001
],
"layers": [
"top"
],
"no_connect_pads": [
"J_MOTOR.MOUNT1"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.1399997999999995,
"bounds_mm": [
4.699896000000001,
3.8499964999999996,
4.899896,
4.5499955
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PB11"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 2.1599916000079986,
"bounds_mm": [
-9.300008,
15.04997,
-7.500012,
16.249968
],
"layers": [
"top"
],
"no_connect_pads": [
"J_MOTOR.MOUNT2"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 1.0391429112598103,
"bounds_mm": [
-2.1892005,
1.7299944999999999,
-1.6207995,
3.6802055
],
"layers": [
"bottom"
],
"no_connect_pads": [
"U_ENCODER.PGO"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
5.2499965,
1.2998999999999998,
5.9499955,
1.4999
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PB1"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.8999967000030004,
"bounds_mm": [
-8.2300005,
-4.3900635,
-6.7300035,
-3.7900644999999997
],
"layers": [
"top"
],
"no_connect_pads": [
"U_PD.DM"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
5.2499965,
2.499796,
5.9499955,
2.699796
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PB8"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.8999967000030004,
"bounds_mm": [
-8.2300005,
-3.3900655000000004,
-6.7300035,
-2.7900665
],
"layers": [
"top"
],
"no_connect_pads": [
"U_PD.DP"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
5.2499965,
2.9001,
5.9499955,
3.1001000000000003
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PB9"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.13999980000000012,
"bounds_mm": [
5.2499965,
3.299896,
5.9499955,
3.499896
],
"layers": [
"top"
],
"no_connect_pads": [
"U_MCU.PB10"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 1.0391429112598098,
"bounds_mm": [
-0.9192005000000001,
-3.6802055,
-0.3507995,
-1.7299944999999999
],
"layers": [
"bottom"
],
"no_connect_pads": [
"U_ENCODER.OUT"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 5.760220802116,
"bounds_mm": [
7.550162,
0.699919,
9.950208,
3.099965
],
"layers": [
"top"
],
"no_connect_pads": [
"BZ1.NC2"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.23517627186496587,
"bounds_mm": [
-2.949894,
-9.641118,
-2.049896,
-9.361108
],
"layers": [
"top"
],
"no_connect_pads": [
"U_DRV.NC7"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.34500184999000066,
"bounds_mm": [
-0.9000615000000001,
-17.204936,
-0.6000624999999999,
-16.054926
],
"layers": [
"top"
],
"no_connect_pads": [
"J_DATA.SBU2"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.3450018499899995,
"bounds_mm": [
-0.6000615,
13.095064,
-0.3000625,
14.245073999999999
],
"layers": [
"top"
],
"no_connect_pads": [
"J_PD.SBU2"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 5.760220802116004,
"bounds_mm": [
14.749538,
0.699665,
17.149584,
3.099711
],
"layers": [
"top"
],
"no_connect_pads": [
"BZ1.NC1"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.3450018499899996,
"bounds_mm": [
0.6000624999999999,
-14.245073999999999,
0.9000615000000001,
-13.095064
],
"layers": [
"top"
],
"no_connect_pads": [
"J_DATA.SBU1"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.23517627186496562,
"bounds_mm": [
-0.140032,
-5.9501040000000005,
0.139978,
-5.0501059999999995
],
"layers": [
"top"
],
"no_connect_pads": [
"U_DRV.NC25"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.34500184998999955,
"bounds_mm": [
0.3999365,
13.095064,
0.6999355,
14.245073999999999
],
"layers": [
"top"
],
"no_connect_pads": [
"J_PD.DP2"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.3450018499899995,
"bounds_mm": [
-0.09993550000000001,
13.095064,
0.2000635,
14.245073999999999
],
"layers": [
"top"
],
"no_connect_pads": [
"J_PD.DM2"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.34500184999000066,
"bounds_mm": [
0.9000625,
16.054926,
1.2000615000000001,
17.204936
],
"layers": [
"top"
],
"no_connect_pads": [
"J_PD.SBU1"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.3450018499900006,
"bounds_mm": [
0.3999365,
16.054926,
0.6999355,
17.204936
],
"layers": [
"top"
],
"no_connect_pads": [
"J_PD.DM1"
],
"classification": "intentional native no-connect pad"
},
{
"area_mm2": 0.34500184999000055,
"bounds_mm": [
-0.09993550000000001,
16.054926,
0.2000635,
17.204936
],
"layers": [
"top"
],
"no_connect_pads": [
"J_PD.DP1"
],
"classification": "intentional native no-connect pad"
}
]
},
"actual_copper_spacing": {
"top": {
"minimum_distinct_conductor_clearance_mm": 0.1516959999999994,
"closest_pairs": [
{
"clearance_mm": 0.1516959999999994,
"conductors": [
[
"CP1"
],
[
"CP2"
]
],
"island_indices": [
43,
66
]
},
{
"clearance_mm": 0.15169999999999814,
"conductors": [
[
"V3V3"
],
[
"TEMP_SDA"
]
],
"island_indices": [
22,
35
]
},
{
"clearance_mm": 0.15169999999999995,
"conductors": [
[
"BUCK_BST"
],
[
"BUCK_SW"
]
],
"island_indices": [
20,
21
]
},
{
"clearance_mm": 0.15461940777125577,
"conductors": [
[
"BUZZER_PWM"
],
[
"LED_G"
]
],
"island_indices": [
148,
160
]
},
{
"clearance_mm": 0.15729149488133973,
"conductors": [
[
"LOGIC_IN"
],
[
"BUCK_BST"
]
],
"island_indices": [
14,
20
]
}
],
"screen_minimum_mm": 0.15,
"geometry_tolerance_mm": 0.0002,
"scope": "actual finished copper edges; pairs within 0.50 mm; same electrical net excluded"
},
"bottom": {
"minimum_distinct_conductor_clearance_mm": 0.15179999999999794,
"closest_pairs": [
{
"clearance_mm": 0.15179999999999794,
"conductors": [
[
"BUCK_BST"
],
[
"BUCK_SW"
]
],
"island_indices": [
240,
249
]
},
{
"clearance_mm": 0.15729149488133973,
"conductors": [
[
"BUCK_BST"
],
[
"LOGIC_IN"
]
],
"island_indices": [
240,
241
]
},
{
"clearance_mm": 0.15746239673706056,
"conductors": [
[
"DATA_VBUS"
],
[
"PD_GOOD"
]
],
"island_indices": [
325,
336
]
},
{
"clearance_mm": 0.15864569361285333,
"conductors": [
[
"USB_DP"
],
[
"USB_DM"
]
],
"island_indices": [
311,
312
]
},
{
"clearance_mm": 0.1599999999999997,
"conductors": [
[
"USB_DM"
],
[
"USB_DP"
]
],
"island_indices": [
312,
348
]
}
],
"screen_minimum_mm": 0.15,
"geometry_tolerance_mm": 0.0002,
"scope": "actual finished copper edges; pairs within 0.50 mm; same electrical net excluded"
},
"inner1": {
"minimum_distinct_conductor_clearance_mm": 0.15729149488133973,
"closest_pairs": [
{
"clearance_mm": 0.15729149488133973,
"conductors": [
[
"BUCK_BST"
],
[
"LOGIC_IN"
]
],
"island_indices": [
436,
437
]
},
{
"clearance_mm": 0.15746239673706056,
"conductors": [
[
"DATA_VBUS"
],
[
"PD_GOOD"
]
],
"island_indices": [
515,
525
]
},
{
"clearance_mm": 0.16139610306789334,
"conductors": [
[
"VM_SENSE"
],
[
"STATUS_R_C"
]
],
"island_indices": [
441,
474
]
},
{
"clearance_mm": 0.1616733974262378,
"conductors": [
[
"SENSE2"
],
[
"PD_CC1"
]
],
"island_indices": [
480,
490
]
},
{
"clearance_mm": 0.16186380098349631,
"conductors": [
[
"GND"
],
[
"STEP"
]
],
"island_indices": [
420,
493
]
}
],
"screen_minimum_mm": 0.15,
"geometry_tolerance_mm": 0.0002,
"scope": "actual finished copper edges; pairs within 0.50 mm; same electrical net excluded"
},
"inner2": {
"minimum_distinct_conductor_clearance_mm": 0.15729149488133973,
"closest_pairs": [
{
"clearance_mm": 0.15729149488133973,
"conductors": [
[
"BUCK_BST"
],
[
"LOGIC_IN"
]
],
"island_indices": [
637,
638
]
},
{
"clearance_mm": 0.15746239673706056,
"conductors": [
[
"PD_GOOD"
],
[
"DATA_VBUS"
]
],
"island_indices": [
656,
719
]
},
{
"clearance_mm": 0.16139610306789334,
"conductors": [
[
"VM_SENSE"
],
[
"STATUS_R_C"
]
],
"island_indices": [
683,
684
]
},
{
"clearance_mm": 0.1616733974262378,
"conductors": [
[
"PD_CC1"
],
[
"SENSE2"
]
],
"island_indices": [
669,
689
]
},
{
"clearance_mm": 0.16186380098349631,
"conductors": [
[
"GND"
],
[
"STEP"
]
],
"island_indices": [
627,
691
]
}
],
"screen_minimum_mm": 0.15,
"geometry_tolerance_mm": 0.0002,
"scope": "actual finished copper edges; pairs within 0.50 mm; same electrical net excluded"
}
},
"paste": {
"F_Paste": {
"bare_interface_overlap_mm2": 0.0,
"manual_plated_joint_overlap_mm2": 0.0,
"outside_smt_copper_mm2": 0.0
},
"B_Paste": {
"bare_interface_overlap_mm2": 0.0,
"manual_plated_joint_overlap_mm2": 0.0,
"outside_smt_copper_mm2": 0.0
}
},
"assembly_tables": {
"bom.csv": {
"rows": 61,
"bare_rows": [],
"missing_fitted": [],
"unexpected": [],
"duplicate_refs": [],
"source_identity_errors": []
},
"pick_and_place.csv": {
"rows": 61,
"bare_rows": [],
"missing_fitted": [],
"unexpected": [],
"duplicate_refs": []
}
},
"cpl_coordinate_comparison": {
"errors": [],
"origin": "board center; mm; unmirrored top coordinates",
"rotation": "native imported land-pattern orientation plus saved pcb_component rotation; supplier interpretation still needs placement-preview approval",
"status": "SOURCE CONVENTION CHECK ONLY; supplier pickup datum and rotation remain USER_REVIEW",
"USB_centers": [
{
"reference": "J_PD",
"CPL_land_pattern_center_mm": {
"x": 0.30000000000000027,
"y": 15.149999999999999
},
"rotation_deg": 0
},
{
"reference": "J_DATA",
"CPL_land_pattern_center_mm": {
"x": 0,
"y": -15.149999999999999
},
"rotation_deg": 0
}
],
"USB_center_note": "Upright GCT USB4145 uses native land-pattern CPL datum; local CAD anchor correction X +0.1524952 mm aligns the native STEP centre. Manufacturer pickup datum and JLCPCB placement preview remain unverified."
},
"drill_source_comparison": {
"missing_mm2": 0.0,
"extra_mm2": 0.0,
"tolerance_mm": 0.00055,
"tolerance_reason": "Exporter slot endpoints and CPL rounded to 3 decimal places; 0.55 micrometer envelope",
"nominal_mounting_holes": 4,
"nominal_USB_plated_slots": 8
},
"mask_opening_comparison": {
"errors": [],
"policy": "uncovered fitted/bare solder pads and plated slots remain open; filled/capped thermal via process required"
},
"stencil_release_screen": {
"candidate_thickness_mm": 0.1,
"minimum_aspect_ratio": 1.899999999999995,
"minimum_area_ratio": 0.7388883950605716,
"screen_limits": {
"aspect_ratio": 1.5,
"area_ratio": 0.66
},
"failing_apertures": [],
"scope": "common geometric release screens only; physical paste/stencil/reflow process acceptance still pending"
},
"exposed_pad_stencil": [
{
"ref": "U_PD",
"pad": "pcb_smtpad_42",
"coverage_fraction": 0.59999937810074
},
{
"ref": "U_MCU",
"pad": "pcb_smtpad_77",
"coverage_fraction": 0.5999998140218561
},
{
"ref": "U_DRV",
"pad": "pcb_smtpad_106",
"coverage_fraction": 0.599999814021856
}
],
"board_outline": {
"bounds_including_stroke": [
-17.525,
-17.525,
17.525,
17.525
],
"centerline_bounds_mm": [
-17.5,
-17.5,
17.5,
17.5
],
"closed_contour_count": 1,
"centerline_length_mm": 140.0,
"centerline_area_mm2": 1225.0,
"valid_35mm_square": true
},
"mask_webs": {
"F_Mask": {
"minimum_web_mm": 0.19877999999999973,
"opening_polygons": 257,
"scope": "nearest distinct mask openings within 0.25 mm"
},
"B_Mask": {
"minimum_web_mm": null,
"opening_polygons": 26,
"scope": "nearest distinct mask openings within 0.25 mm"
}
},
"mask": {
"F_Mask": {
"area_mm2": 241.43934673160186,
"bounds_mm": [
-17.1350005,
-17.240000000000002,
17.149838,
17.204936
]
},
"B_Mask": {
"area_mm2": 54.35339123950721,
"bounds_mm": [
-14.6,
-17.129891999999998,
14.6,
17.129891999999998
]
}
},
"plated_annulus_source_min_mm": 0.07500000000000001,
"copper_clearances": {
"top": {
"mount_hole_edge_clearance_mm": 1.783144206644151,
"board_edge_clearance_mm": 0.259999999999998
},
"bottom": {
"mount_hole_edge_clearance_mm": 1.7681880674369095,
"board_edge_clearance_mm": 0.3500000000000014
},
"inner1": {
"mount_hole_edge_clearance_mm": 1.783704217340228,
"board_edge_clearance_mm": 0.3500000000000014
},
"inner2": {
"mount_hole_edge_clearance_mm": 1.783704217340228,
"board_edge_clearance_mm": 0.3500000000000014
}
},
"actual_keepout_checks": [
{
"keepout_id": "pcb_keepout_0",
"shape": "circle",
"center_mm": {
"x": -13,
"y": -13
},
"layer": "top",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_0",
"shape": "circle",
"center_mm": {
"x": -13,
"y": -13
},
"layer": "inner1",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_0",
"shape": "circle",
"center_mm": {
"x": -13,
"y": -13
},
"layer": "inner2",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_0",
"shape": "circle",
"center_mm": {
"x": -13,
"y": -13
},
"layer": "bottom",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_1",
"shape": "circle",
"center_mm": {
"x": -13,
"y": 13
},
"layer": "top",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_1",
"shape": "circle",
"center_mm": {
"x": -13,
"y": 13
},
"layer": "inner1",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_1",
"shape": "circle",
"center_mm": {
"x": -13,
"y": 13
},
"layer": "inner2",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_1",
"shape": "circle",
"center_mm": {
"x": -13,
"y": 13
},
"layer": "bottom",
"clearance_mm": 0.19998449770955515,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_2",
"shape": "circle",
"center_mm": {
"x": 13,
"y": -13
},
"layer": "top",
"clearance_mm": 0.19998449770955518,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_2",
"shape": "circle",
"center_mm": {
"x": 13,
"y": -13
},
"layer": "inner1",
"clearance_mm": 0.19998449770955518,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_2",
"shape": "circle",
"center_mm": {
"x": 13,
"y": -13
},
"layer": "inner2",
"clearance_mm": 0.19998449770955518,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_2",
"shape": "circle",
"center_mm": {
"x": 13,
"y": -13
},
"layer": "bottom",
"clearance_mm": 0.1832646837015217,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_3",
"shape": "circle",
"center_mm": {
"x": 13,
"y": 13
},
"layer": "top",
"clearance_mm": 0.18326468370151996,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_3",
"shape": "circle",
"center_mm": {
"x": 13,
"y": 13
},
"layer": "inner1",
"clearance_mm": 0.18381328671701935,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_3",
"shape": "circle",
"center_mm": {
"x": 13,
"y": 13
},
"layer": "inner2",
"clearance_mm": 0.18381328671701935,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
},
{
"keepout_id": "pcb_keepout_3",
"shape": "circle",
"center_mm": {
"x": 13,
"y": 13
},
"layer": "bottom",
"clearance_mm": 0.16819075265860747,
"intrusion_area_mm2": 0.0,
"intrusion_beyond_0_0002mm_tolerance_mm2": 0.0
}
],
"silkscreen_clearances": {
"F_SilkScreen": {
"overlap_mask_openings_mm2": 0.0,
"inside_0_15mm_mask_guard_mm2": 0.0,
"outside_board_0_10mm_inset_mm2": 0.0
},
"B_SilkScreen": {
"overlap_mask_openings_mm2": 0.0,
"inside_0_15mm_mask_guard_mm2": 0.0,
"outside_board_0_10mm_inset_mm2": 0.0
}
},
"paste_source_comparison": {
"F_Paste": {
"missing_mm2": 0.0,
"extra_mm2": 0.0
},
"B_Paste": {
"missing_mm2": 0.0,
"extra_mm2": 0.0
}
},
"status": "PASS"
}
Related Packages
More from this authorAnasSarkiz/vibe_GoblinThese code snippets define various physical electronic components such as ICs, connectors, sensors, LEDs, and chips, specifying their pin layouts, footprint pads, silkscreen markings, courtyard outlines, and 3D CAD models for placement on PCB boards.
Similar packageShiboSoftwareDev/nema8-20mm-dual-usbc-stepper-controllerA compact 20 mm four-layer USB‑C stepper-controller PCB combining CH32X035 MCU control, TMC2209 motor driving, USB‑C PD/data interfaces, protection/power regulation, temperature/LED status hardware, and NEMA8 motor connectivity.
Discover something newimrishabh18/nema-23-stepper-controllerA four-layer NEMA23 stepper motor controller PCB featuring an RP2040 MCU, DRV8452 dual-phase driver, USB‑C PD power input/protection, current and temperature sensing, status LED/buzzer, and optional magnetic encoder.