AnasSarkiz/NEMA14_CH32X035G8U6
A NEMA stepper motor is shown with proposed M3 screws/spacers, four wired motor leads and splices, and a JST SHR-04V-S connector.
- Version
- 1.12.2
- License
- ISC
- Stars
- 0
artifacts/edge-resistors/clearance-verification.json
{
"passed": true,
"board_sha256": "0d772c1f839f50f30caa512a0dcc58f8ecfa88e35c2e9b44c2422365bc0a8e64",
"baseline_git_revision": "88cf468ffe93870cff181c06d808ad959d1ddce3",
"target_pad_to_edge_mm": 0.75,
"scope": "Every resistor; all four edges; top and bottom assembly sides",
"resistors_checked": 23,
"actual_Gerber_pad_matches": 46,
"moved_resistors": [
"R_PD",
"R_PG",
"R_CC1",
"R_CC2",
"R_USB_SENSE_H",
"R_USB_SENSE_L",
"R_VM_H",
"R_VM_L",
"R_REF_L",
"R_ENABLE",
"R_SLEEP",
"R_TEMP_SCL",
"R_PWR_LED",
"R_STATUS_G",
"R_STATUS_B",
"R_BUZZER_GATE",
"R_BUZZER_PD"
],
"minimum_actual_pad_edge_mm": 0.7679969999999976,
"electrical_source_components_pins_nets_traces_preserved": true,
"all_non_resistor_placements_preserved": false,
"top_assembly_relocation_authorized": true,
"unchanged_outline_mm": [
35,
35
],
"unchanged_mount_holes_mm": [
[
-13,
-13
],
[
-13,
13
],
[
13,
-13
],
[
13,
13
]
],
"unchanged_mount_drill_mm": 3.2,
"resistors": [
{
"reference": "R_PD",
"layer": "top",
"center_mm": {
"x": 12.8,
"y": 8.9
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 3.5433985000000003,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_43",
"native_xy_mm": [
13.553364,
8.9
],
"actual_Gerber_bounds_mm": [
13.1501265,
8.467997,
13.9566015,
9.332003
],
"all_four_edge_margins_mm": {
"left": 30.6501265,
"bottom": 25.967997,
"right": 3.5433985000000003,
"top": 8.167997
}
},
{
"pad_id": "pcb_smtpad_44",
"native_xy_mm": [
12.046636000000001,
8.9
],
"actual_Gerber_bounds_mm": [
11.6433985,
8.467997,
12.449873499999999,
9.332003
],
"all_four_edge_margins_mm": {
"left": 29.1433985,
"bottom": 25.967997,
"right": 5.050126500000001,
"top": 8.167997
}
}
]
},
{
"reference": "R_PG",
"layer": "top",
"center_mm": {
"x": 16.3,
"y": -8.28
},
"rotation_deg": 90,
"moved": true,
"minimum_actual_pad_edge_mm": 0.7679969999999976,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_47",
"native_xy_mm": [
16.3,
-7.526635999999999
],
"actual_Gerber_bounds_mm": [
15.867997,
-7.9298735,
16.732003000000002,
-7.1233984999999995
],
"all_four_edge_margins_mm": {
"left": 33.367997,
"bottom": 9.5701265,
"right": 0.7679969999999976,
"top": 24.6233985
}
},
{
"pad_id": "pcb_smtpad_48",
"native_xy_mm": [
16.3,
-9.033363999999999
],
"actual_Gerber_bounds_mm": [
15.867997,
-9.4366015,
16.732003000000002,
-8.630126500000001
],
"all_four_edge_margins_mm": {
"left": 33.367997,
"bottom": 8.0633985,
"right": 0.7679969999999976,
"top": 26.130126500000003
}
}
]
},
{
"reference": "R_CC1",
"layer": "top",
"center_mm": {
"x": -6.4,
"y": -15.72
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 1.5099979999999995,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_82",
"native_xy_mm": [
-5.9671840000000005,
-15.72
],
"actual_Gerber_bounds_mm": [
-6.250012999999999,
-15.990002,
-5.684355,
-15.449998
],
"all_four_edge_margins_mm": {
"left": 11.249987,
"bottom": 1.5099979999999995,
"right": 23.184355,
"top": 32.949998
}
},
{
"pad_id": "pcb_smtpad_83",
"native_xy_mm": [
-6.832816,
-15.72
],
"actual_Gerber_bounds_mm": [
-7.115645000000001,
-15.990002,
-6.549987,
-15.449998
],
"all_four_edge_margins_mm": {
"left": 10.384355,
"bottom": 1.5099979999999995,
"right": 24.049987,
"top": 32.949998
}
}
]
},
{
"reference": "R_CC2",
"layer": "top",
"center_mm": {
"x": 6.8,
"y": -10.72
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 6.5099979999999995,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_84",
"native_xy_mm": [
7.232816,
-10.72
],
"actual_Gerber_bounds_mm": [
6.949987,
-10.990002,
7.515644999999999,
-10.449998
],
"all_four_edge_margins_mm": {
"left": 24.449987,
"bottom": 6.5099979999999995,
"right": 9.984355,
"top": 27.949998
}
},
{
"pad_id": "pcb_smtpad_85",
"native_xy_mm": [
6.367184,
-10.72
],
"actual_Gerber_bounds_mm": [
6.084355,
-10.990002,
6.6500129999999995,
-10.449998
],
"all_four_edge_margins_mm": {
"left": 23.584355000000002,
"bottom": 6.5099979999999995,
"right": 10.849987,
"top": 27.949998
}
}
]
},
{
"reference": "R_USB_SENSE_H",
"layer": "top",
"center_mm": {
"x": -4.5,
"y": 1.5
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 11.8433985,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_86",
"native_xy_mm": [
-3.746636,
1.5
],
"actual_Gerber_bounds_mm": [
-4.1498735,
1.067997,
-3.3433985,
1.932003
],
"all_four_edge_margins_mm": {
"left": 13.3501265,
"bottom": 18.567997,
"right": 20.8433985,
"top": 15.567997
}
},
{
"pad_id": "pcb_smtpad_87",
"native_xy_mm": [
-5.253364,
1.5
],
"actual_Gerber_bounds_mm": [
-5.656601500000001,
1.067997,
-4.8501265,
1.932003
],
"all_four_edge_margins_mm": {
"left": 11.8433985,
"bottom": 18.567997,
"right": 22.350126500000002,
"top": 15.567997
}
}
]
},
{
"reference": "R_USB_SENSE_L",
"layer": "top",
"center_mm": {
"x": -8.8,
"y": -16.3
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 0.7679969999999976,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_88",
"native_xy_mm": [
-8.046636000000001,
-16.3
],
"actual_Gerber_bounds_mm": [
-8.449873499999999,
-16.732003000000002,
-7.643398499999999,
-15.867997
],
"all_four_edge_margins_mm": {
"left": 9.050126500000001,
"bottom": 0.7679969999999976,
"right": 25.1433985,
"top": 33.367997
}
},
{
"pad_id": "pcb_smtpad_89",
"native_xy_mm": [
-9.553364,
-16.3
],
"actual_Gerber_bounds_mm": [
-9.9566015,
-16.732003000000002,
-9.1501265,
-15.867997
],
"all_four_edge_margins_mm": {
"left": 7.5433985,
"bottom": 0.7679969999999976,
"right": 26.6501265,
"top": 33.367997
}
}
]
},
{
"reference": "R_VM_H",
"layer": "top",
"center_mm": {
"x": 0.25,
"y": -1.25
},
"rotation_deg": 90,
"moved": true,
"minimum_actual_pad_edge_mm": 15.0933985,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_90",
"native_xy_mm": [
0.25000000000000006,
-0.49663599999999997
],
"actual_Gerber_bounds_mm": [
-0.18200300000000003,
-0.8998735,
0.682003,
-0.0933985
],
"all_four_edge_margins_mm": {
"left": 17.317997,
"bottom": 16.600126500000002,
"right": 16.817997,
"top": 17.5933985
}
},
{
"pad_id": "pcb_smtpad_91",
"native_xy_mm": [
0.24999999999999994,
-2.003364
],
"actual_Gerber_bounds_mm": [
-0.18200300000000003,
-2.4066015,
0.682003,
-1.6001265
],
"all_four_edge_margins_mm": {
"left": 17.317997,
"bottom": 15.0933985,
"right": 16.817997,
"top": 19.100126500000002
}
}
]
},
{
"reference": "R_VM_L",
"layer": "top",
"center_mm": {
"x": -6.62,
"y": 5.5
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 9.7233985,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_92",
"native_xy_mm": [
-5.866636,
5.5
],
"actual_Gerber_bounds_mm": [
-6.2698735,
5.067997,
-5.463398499999999,
5.932003
],
"all_four_edge_margins_mm": {
"left": 11.2301265,
"bottom": 22.567997,
"right": 22.9633985,
"top": 11.567997
}
},
{
"pad_id": "pcb_smtpad_93",
"native_xy_mm": [
-7.3733640000000005,
5.5
],
"actual_Gerber_bounds_mm": [
-7.7766015,
5.067997,
-6.970126499999999,
5.932003
],
"all_four_edge_margins_mm": {
"left": 9.7233985,
"bottom": 22.567997,
"right": 24.4701265,
"top": 11.567997
}
}
]
},
{
"reference": "R_SA",
"layer": "top",
"center_mm": {
"x": -4.351495,
"y": -6.6337340000000005
},
"rotation_deg": 90,
"moved": false,
"minimum_actual_pad_edge_mm": 9.3000005,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_147",
"native_xy_mm": [
-4.351495,
-5.633736
],
"actual_Gerber_bounds_mm": [
-5.04,
-6.2000035,
-3.6629899999999997,
-5.0674684999999995
],
"all_four_edge_margins_mm": {
"left": 12.46,
"bottom": 11.299996499999999,
"right": 21.16299,
"top": 22.5674685
}
},
{
"pad_id": "pcb_smtpad_148",
"native_xy_mm": [
-4.351495,
-7.633731999999999
],
"actual_Gerber_bounds_mm": [
-5.04,
-8.1999995,
-3.6629899999999997,
-7.0674645
],
"all_four_edge_margins_mm": {
"left": 12.46,
"bottom": 9.3000005,
"right": 21.16299,
"top": 24.5674645
}
}
]
},
{
"reference": "R_SB",
"layer": "top",
"center_mm": {
"x": 4.4,
"y": -5
},
"rotation_deg": 90,
"moved": false,
"minimum_actual_pad_edge_mm": 10.9337345,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_149",
"native_xy_mm": [
4.4,
-4.000002
],
"actual_Gerber_bounds_mm": [
3.711495,
-4.566269500000001,
5.0885050000000005,
-3.4337345000000004
],
"all_four_edge_margins_mm": {
"left": 21.211495,
"bottom": 12.9337305,
"right": 12.411494999999999,
"top": 20.9337345
}
},
{
"pad_id": "pcb_smtpad_150",
"native_xy_mm": [
4.4,
-5.999998
],
"actual_Gerber_bounds_mm": [
3.711495,
-6.5662655,
5.0885050000000005,
-5.433730499999999
],
"all_four_edge_margins_mm": {
"left": 21.211495,
"bottom": 10.9337345,
"right": 12.411494999999999,
"top": 22.9337305
}
}
]
},
{
"reference": "R_REF_H",
"layer": "top",
"center_mm": {
"x": 2.436602,
"y": -2.057997
},
"rotation_deg": 0,
"moved": false,
"minimum_actual_pad_edge_mm": 13.9067965,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_151",
"native_xy_mm": [
3.189966,
-2.057997
],
"actual_Gerber_bounds_mm": [
2.7867285,
-2.4899999999999998,
3.5932035,
-1.625994
],
"all_four_edge_margins_mm": {
"left": 20.2867285,
"bottom": 15.01,
"right": 13.9067965,
"top": 19.125994
}
},
{
"pad_id": "pcb_smtpad_152",
"native_xy_mm": [
1.6832380000000002,
-2.057997
],
"actual_Gerber_bounds_mm": [
1.2800004999999999,
-2.4899999999999998,
2.0864755,
-1.625994
],
"all_four_edge_margins_mm": {
"left": 18.7800005,
"bottom": 15.01,
"right": 15.4135245,
"top": 19.125994
}
}
]
},
{
"reference": "R_REF_L",
"layer": "top",
"center_mm": {
"x": 4.62,
"y": -7.79
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 9.277997,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_153",
"native_xy_mm": [
5.3733640000000005,
-7.79
],
"actual_Gerber_bounds_mm": [
4.970126499999999,
-8.222003,
5.7766015,
-7.357997
],
"all_four_edge_margins_mm": {
"left": 22.4701265,
"bottom": 9.277997,
"right": 11.7233985,
"top": 24.857997
}
},
{
"pad_id": "pcb_smtpad_154",
"native_xy_mm": [
3.866636,
-7.79
],
"actual_Gerber_bounds_mm": [
3.4633985000000003,
-8.222003,
4.2698735,
-7.357997
],
"all_four_edge_margins_mm": {
"left": 20.9633985,
"bottom": 9.277997,
"right": 13.2301265,
"top": 24.857997
}
}
]
},
{
"reference": "R_ENABLE",
"layer": "top",
"center_mm": {
"x": -7.07,
"y": -6.96
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 9.2733985,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_157",
"native_xy_mm": [
-6.316636,
-6.96
],
"actual_Gerber_bounds_mm": [
-6.7198735,
-7.392003,
-5.9133985,
-6.527997
],
"all_four_edge_margins_mm": {
"left": 10.7801265,
"bottom": 10.107997000000001,
"right": 23.4133985,
"top": 24.027997
}
},
{
"pad_id": "pcb_smtpad_158",
"native_xy_mm": [
-7.823364000000001,
-6.96
],
"actual_Gerber_bounds_mm": [
-8.2266015,
-7.392003,
-7.420126499999999,
-6.527997
],
"all_four_edge_margins_mm": {
"left": 9.2733985,
"bottom": 10.107997000000001,
"right": 24.9201265,
"top": 24.027997
}
}
]
},
{
"reference": "R_SLEEP",
"layer": "top",
"center_mm": {
"x": 6.04,
"y": 14.13
},
"rotation_deg": 90,
"moved": true,
"minimum_actual_pad_edge_mm": 2.2133985000000003,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_159",
"native_xy_mm": [
6.04,
14.883364
],
"actual_Gerber_bounds_mm": [
5.607997,
14.4801265,
6.472003,
15.2866015
],
"all_four_edge_margins_mm": {
"left": 23.107997,
"bottom": 31.9801265,
"right": 11.027997,
"top": 2.2133985000000003
}
},
{
"pad_id": "pcb_smtpad_160",
"native_xy_mm": [
6.04,
13.376636000000001
],
"actual_Gerber_bounds_mm": [
5.607997,
12.9733985,
6.472003,
13.779873499999999
],
"all_four_edge_margins_mm": {
"left": 23.107997,
"bottom": 30.473398500000002,
"right": 11.027997,
"top": 3.720126500000001
}
}
]
},
{
"reference": "R_USB_BOOT",
"layer": "top",
"center_mm": {
"x": 2.705645,
"y": 7.810002000000001
},
"rotation_deg": 0,
"moved": false,
"minimum_actual_pad_edge_mm": 9.419996,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_175",
"native_xy_mm": [
3.138461,
7.810002
],
"actual_Gerber_bounds_mm": [
2.855632,
7.54,
3.42129,
8.080004
],
"all_four_edge_margins_mm": {
"left": 20.355632,
"bottom": 25.04,
"right": 14.078710000000001,
"top": 9.419996
}
},
{
"pad_id": "pcb_smtpad_176",
"native_xy_mm": [
2.272829,
7.810002
],
"actual_Gerber_bounds_mm": [
1.9900000000000002,
7.54,
2.555658,
8.080004
],
"all_four_edge_margins_mm": {
"left": 19.490000000000002,
"bottom": 25.04,
"right": 14.944341999999999,
"top": 9.419996
}
}
]
},
{
"reference": "R_TEMP_SDA",
"layer": "top",
"center_mm": {
"x": -7.929998000000001,
"y": 7.585645
},
"rotation_deg": 90,
"moved": false,
"minimum_actual_pad_edge_mm": 9.19871,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_195",
"native_xy_mm": [
-7.929998,
8.018461
],
"actual_Gerber_bounds_mm": [
-8.200000000000001,
7.735632000000001,
-7.6599960000000005,
8.30129
],
"all_four_edge_margins_mm": {
"left": 9.299999999999999,
"bottom": 25.235632000000003,
"right": 25.159996,
"top": 9.19871
}
},
{
"pad_id": "pcb_smtpad_196",
"native_xy_mm": [
-7.929998,
7.1528290000000005
],
"actual_Gerber_bounds_mm": [
-8.200000000000001,
6.869999999999999,
-7.6599960000000005,
7.435658
],
"all_four_edge_margins_mm": {
"left": 9.299999999999999,
"bottom": 24.369999999999997,
"right": 25.159996,
"top": 10.064342
}
}
]
},
{
"reference": "R_TEMP_SCL",
"layer": "top",
"center_mm": {
"x": 9.17,
"y": 16.44
},
"rotation_deg": 180,
"moved": true,
"minimum_actual_pad_edge_mm": 0.7899979999999971,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_197",
"native_xy_mm": [
8.737184,
16.44
],
"actual_Gerber_bounds_mm": [
8.454355,
16.169998,
9.020012999999999,
16.710002000000003
],
"all_four_edge_margins_mm": {
"left": 25.954355,
"bottom": 33.669998,
"right": 8.479987000000001,
"top": 0.7899979999999971
}
},
{
"pad_id": "pcb_smtpad_198",
"native_xy_mm": [
9.602816,
16.44
],
"actual_Gerber_bounds_mm": [
9.319987000000001,
16.169998,
9.885645,
16.710002000000003
],
"all_four_edge_margins_mm": {
"left": 26.819987,
"bottom": 33.669998,
"right": 7.614355,
"top": 0.7899979999999971
}
}
]
},
{
"reference": "R_PWR_LED",
"layer": "top",
"center_mm": {
"x": 16.025,
"y": 8.51
},
"rotation_deg": 90,
"moved": true,
"minimum_actual_pad_edge_mm": 1.2049979999999998,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_201",
"native_xy_mm": [
16.025,
8.942816
],
"actual_Gerber_bounds_mm": [
15.754997999999999,
8.659987000000001,
16.295002,
9.225645
],
"all_four_edge_margins_mm": {
"left": 33.254998,
"bottom": 26.159987,
"right": 1.2049979999999998,
"top": 8.274355
}
},
{
"pad_id": "pcb_smtpad_202",
"native_xy_mm": [
16.025,
8.077183999999999
],
"actual_Gerber_bounds_mm": [
15.754997999999999,
7.794355000000001,
16.295002,
8.360013
],
"all_four_edge_margins_mm": {
"left": 33.254998,
"bottom": 25.294355000000003,
"right": 1.2049979999999998,
"top": 9.139987
}
}
]
},
{
"reference": "R_STATUS_R",
"layer": "top",
"center_mm": {
"x": -0.489998,
"y": 11.365645
},
"rotation_deg": 90,
"moved": false,
"minimum_actual_pad_edge_mm": 5.418710000000001,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_207",
"native_xy_mm": [
-0.489998,
11.798461000000001
],
"actual_Gerber_bounds_mm": [
-0.76,
11.515632,
-0.21999599999999997,
12.08129
],
"all_four_edge_margins_mm": {
"left": 16.74,
"bottom": 29.015632,
"right": 17.719996,
"top": 5.418710000000001
}
},
{
"pad_id": "pcb_smtpad_208",
"native_xy_mm": [
-0.489998,
10.932829
],
"actual_Gerber_bounds_mm": [
-0.76,
10.65,
-0.21999599999999997,
11.215658
],
"all_four_edge_margins_mm": {
"left": 16.74,
"bottom": 28.15,
"right": 17.719996,
"top": 6.2843420000000005
}
}
]
},
{
"reference": "R_STATUS_G",
"layer": "top",
"center_mm": {
"x": 0.48,
"y": 9.17
},
"rotation_deg": 90,
"moved": true,
"minimum_actual_pad_edge_mm": 7.614355,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_212",
"native_xy_mm": [
0.48,
9.602816
],
"actual_Gerber_bounds_mm": [
0.20999799999999996,
9.319987000000001,
0.7500020000000001,
9.885645
],
"all_four_edge_margins_mm": {
"left": 17.709998,
"bottom": 26.819987,
"right": 16.749998,
"top": 7.614355
}
},
{
"pad_id": "pcb_smtpad_213",
"native_xy_mm": [
0.48,
8.737184
],
"actual_Gerber_bounds_mm": [
0.20999799999999996,
8.454355,
0.7500020000000001,
9.020012999999999
],
"all_four_edge_margins_mm": {
"left": 17.709998,
"bottom": 25.954355,
"right": 16.749998,
"top": 8.479987000000001
}
}
]
},
{
"reference": "R_STATUS_B",
"layer": "top",
"center_mm": {
"x": 2.85,
"y": 6.3
},
"rotation_deg": 90,
"moved": true,
"minimum_actual_pad_edge_mm": 10.484355,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_217",
"native_xy_mm": [
2.85,
6.732816
],
"actual_Gerber_bounds_mm": [
2.5799980000000002,
6.449987,
3.120002,
7.015644999999999
],
"all_four_edge_margins_mm": {
"left": 20.079998,
"bottom": 23.949987,
"right": 14.379998,
"top": 10.484355
}
},
{
"pad_id": "pcb_smtpad_218",
"native_xy_mm": [
2.85,
5.867184
],
"actual_Gerber_bounds_mm": [
2.5799980000000002,
5.584355,
3.120002,
6.1500129999999995
],
"all_four_edge_margins_mm": {
"left": 20.079998,
"bottom": 23.084355000000002,
"right": 14.379998,
"top": 11.349987
}
}
]
},
{
"reference": "R_BUZZER_GATE",
"layer": "top",
"center_mm": {
"x": 6.98,
"y": -12.88
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 4.349997999999999,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_231",
"native_xy_mm": [
7.412816,
-12.88
],
"actual_Gerber_bounds_mm": [
7.129987,
-13.150002,
7.695645000000001,
-12.609998000000001
],
"all_four_edge_margins_mm": {
"left": 24.629987,
"bottom": 4.349997999999999,
"right": 9.804355,
"top": 30.109998
}
},
{
"pad_id": "pcb_smtpad_232",
"native_xy_mm": [
6.547184000000001,
-12.88
],
"actual_Gerber_bounds_mm": [
6.264355,
-13.150002,
6.830012999999999,
-12.609998000000001
],
"all_four_edge_margins_mm": {
"left": 23.764355000000002,
"bottom": 4.349997999999999,
"right": 10.669987,
"top": 30.109998
}
}
]
},
{
"reference": "R_BUZZER_PD",
"layer": "top",
"center_mm": {
"x": 9.1,
"y": -10.71
},
"rotation_deg": 0,
"moved": true,
"minimum_actual_pad_edge_mm": 6.519997999999999,
"actual_pad_matches": [
{
"pad_id": "pcb_smtpad_233",
"native_xy_mm": [
9.532816,
-10.71
],
"actual_Gerber_bounds_mm": [
9.249987,
-10.980002,
9.815645,
-10.439998000000001
],
"all_four_edge_margins_mm": {
"left": 26.749987,
"bottom": 6.519997999999999,
"right": 7.684355,
"top": 27.939998000000003
}
},
{
"pad_id": "pcb_smtpad_234",
"native_xy_mm": [
8.667183999999999,
-10.71
],
"actual_Gerber_bounds_mm": [
8.384355000000001,
-10.980002,
8.950013,
-10.439998000000001
],
"all_four_edge_margins_mm": {
"left": 25.884355,
"bottom": 6.519997999999999,
"right": 8.549987,
"top": 27.939998000000003
}
}
]
}
],
"errors": []
}
Related Packages
More from this authorAnasSarkiz/vibe_GoblinThese code snippets define various physical electronic components such as ICs, connectors, sensors, LEDs, and chips, specifying their pin layouts, footprint pads, silkscreen markings, courtyard outlines, and 3D CAD models for placement on PCB boards.
Similar packageShiboSoftwareDev/nema8-20mm-dual-usbc-stepper-controllerA compact 20 mm four-layer USB‑C stepper-controller PCB combining CH32X035 MCU control, TMC2209 motor driving, USB‑C PD/data interfaces, protection/power regulation, temperature/LED status hardware, and NEMA8 motor connectivity.
Discover something newimrishabh18/nema-23-stepper-controllerA four-layer NEMA23 stepper motor controller PCB featuring an RP2040 MCU, DRV8452 dual-phase driver, USB‑C PD power input/protection, current and temperature sensing, status LED/buzzer, and optional magnetic encoder.