0hmX/mq135-air-quality-sensor-module

dist/index.js

import { jsxs, jsx } from 'react/jsx-runtime';
import mq135ModelUrl from '././assets/mq135-sensor-689f400e.glb';
import rightAngleHeaderModelUrl from '././assets/right-angle-pin-header-1x4-bf1c192e.glb';
import trimmerModelUrl from '././assets/3362p-trimmer-7679fcc7.glb';
import soic8ModelUrl from '././assets/soic8-910f69d4.glb';
import { Fragment } from 'react';

const SENSOR_SECTION = "sensor";
const COMPARATOR_SECTION = "comparator";
const INDICATOR_SECTION = "indicators";
const INTERFACE_SECTION = "interface";
// Winsen Configuration A, bottom view: diagonal sensing electrodes with the
// heater leads centered at left/right. The vertical 90°/270° positions are empty.
const sensorPinAngles = [225, 180, 135, 45, 0, 315];
const sensorPinPositions = sensorPinAngles.map((angleDegrees, pinIndex) => {
    const pin = pinIndex + 1;
    const angle = (angleDegrees * Math.PI) / 180;
    return { pin, x: 4.75 * Math.cos(angle), y: 4.75 * Math.sin(angle) };
});
const headerPinX = [-3.81, -1.27, 1.27, 3.81];
/** Reproduction of the Robocraze/Amazon blue FC-22 MQ-135 breakout. */
function MQ135AirQualitySensorModule() {
    return (jsxs("board", { width: "20.4mm", height: "32.4mm", layers: 2, borderRadius: "0.5mm", thickness: "1.6mm", solderMaskColor: "blue", silkscreenColor: "white", doubleSidedAssembly: true, minBoardEdgeClearance: "0.2mm", children: [jsx("net", { name: "VCC_5V" }), jsx("net", { name: "GND" }), jsx("net", { name: "AO" }), jsx("net", { name: "THRESHOLD" }), jsx("net", { name: "DO" }), jsx("net", { name: "PWR_LED_A" }), jsx("net", { name: "DO_LED_A" }), jsx("net", { name: "HEATER_RETURN" }), jsx("schematicsection", { name: SENSOR_SECTION, displayName: "MQ-135 sensor" }), jsx("schematicsection", { name: COMPARATOR_SECTION, displayName: "Adjustable digital threshold" }), jsx("schematicsection", { name: INDICATOR_SECTION, displayName: "Status and decoupling" }), jsx("schematicsection", { name: INTERFACE_SECTION, displayName: "Module output" }), jsx("chip", { name: "MQ1", displayName: "MQ-135", manufacturerPartNumber: "MQ135", datasheetUrl: "https://www.winsen-sensor.com/d/files/mq135-%28ver1_6%29---manual.pdf", pinLabels: {
                    pin1: "B1",
                    pin2: "H1",
                    pin3: "B2",
                    pin4: "A2",
                    pin5: "H2",
                    pin6: "A1",
                }, pinAttributes: {
                    B1: { mustBeConnected: true },
                    H1: {
                        mustBeConnected: true,
                        requiresPower: true,
                        requiresVoltage: "5V",
                    },
                    B2: { mustBeConnected: true },
                    A2: { mustBeConnected: true },
                    H2: { mustBeConnected: true, requiresGround: true },
                    A1: { mustBeConnected: true },
                }, internallyConnectedPins: [
                    ["pin1", "pin3"],
                    ["pin4", "pin6"],
                ], schPinArrangement: {
                    leftSide: {
                        pins: ["B1", "B2", "H1"],
                        direction: "top-to-bottom",
                    },
                    rightSide: {
                        pins: ["A1", "A2", "H2"],
                        direction: "top-to-bottom",
                    },
                }, schSectionName: SENSOR_SECTION, schX: -16, schY: 3, schWidth: 1.58, schHeight: 0.8, pcbX: 0, pcbY: 3.1, footprint: jsxs("footprint", { children: [sensorPinPositions.map(({ pin, x, y }) => (jsx(Fragment, { children: jsx("platedhole", { portHints: [`pin${pin}`], pcbX: x, pcbY: y, shape: "circle", holeDiameter: "1.3mm", outerDiameter: "2.1mm" }) }, pin))), jsx("silkscreencircle", { radius: "9.5mm", strokeWidth: "0.2mm" })] }), cadModel: { glbUrl: mq135ModelUrl, modelBoardNormalDirection: "z+" } }), jsx("resistor", { name: "R_H", displayName: "5R1", resistance: "5.1ohm", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C313941"] }, manufacturerPartNumber: "CRCW08055R10FKEAHP", layer: "bottom", schSectionName: SENSOR_SECTION, schX: -9, schY: 6, schRotation: 90, pcbX: -6.2, pcbY: 0.5 }), jsx("resistor", { name: "R_L", displayName: "202", resistance: "2kohm", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C17604"] }, manufacturerPartNumber: "0805W8F2001T5E", layer: "bottom", schSectionName: SENSOR_SECTION, schX: -9, schY: 1, schRotation: 90, pcbX: -6.2, pcbY: -2 }), jsx("capacitor", { name: "C_AO", capacitance: "100nF", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C49678"] }, manufacturerPartNumber: "CC0805KRX7R9BB104", layer: "bottom", schSectionName: SENSOR_SECTION, schX: -4, schY: 1, schOrientation: "vertical", pcbX: -6.2, pcbY: -4.3 }), jsx("potentiometer", { name: "RV1", displayName: "103", maxResistance: "10kohm", pinVariant: "three_pin", supplierPartNumbers: { jlcpcb: ["C118956"] }, manufacturerPartNumber: "3362P-1-103", layer: "bottom", schSectionName: COMPARATOR_SECTION, schX: 0, schY: 5, pcbX: 6.8, pcbY: 7.8, pcbRotation: 90, footprint: jsxs("footprint", { children: [jsx("platedhole", { portHints: ["pin1"], pcbX: -2.5, pcbY: -1.25, shape: "circle", holeDiameter: "1mm", outerDiameter: "1.8mm" }), jsx("platedhole", { portHints: ["pin2"], pcbX: 0, pcbY: 1.25, shape: "circle", holeDiameter: "1mm", outerDiameter: "1.8mm" }), jsx("platedhole", { portHints: ["pin3"], pcbX: 2.5, pcbY: -1.25, shape: "circle", holeDiameter: "1mm", outerDiameter: "1.8mm" })] }), cadModel: { glbUrl: trimmerModelUrl, modelBoardNormalDirection: "z+" } }), jsx("chip", { name: "U1", displayName: "LM393", manufacturerPartNumber: "LM393DR2G", supplierPartNumbers: { jlcpcb: ["C7955"] }, footprint: jsxs("footprint", { children: [[
                            { pin: 1, x: -2.7051, y: -1.905 },
                            { pin: 2, x: -2.7051, y: -0.635 },
                            { pin: 3, x: -2.7051, y: 0.635 },
                            { pin: 4, x: -2.7051, y: 1.905 },
                            { pin: 5, x: 2.7051, y: 1.905 },
                            { pin: 6, x: 2.7051, y: 0.635 },
                            { pin: 7, x: 2.7051, y: -0.635 },
                            { pin: 8, x: 2.7051, y: -1.905 },
                        ].map(({ pin, x, y }) => (jsx(Fragment, { children: jsx("smtpad", { portHints: [`pin${pin}`], shape: "pill", pcbX: x, pcbY: y, width: "1.9502mm", height: "0.5684mm", radius: "0.2842mm" }) }, pin))), jsx("silkscreenrect", { width: "4mm", height: "5mm", strokeWidth: "0.2mm" })] }), cadModel: { glbUrl: soic8ModelUrl, modelBoardNormalDirection: "z+" }, layer: "bottom", pinLabels: {
                    pin1: "OUTA",
                    pin2: "INA_NEG",
                    pin3: "INA_POS",
                    pin4: "GND",
                    pin5: "INB_POS",
                    pin6: "INB_NEG",
                    pin7: "OUTB",
                    pin8: "VCC",
                }, pinAttributes: {
                    OUTA: { doNotConnect: true },
                    INA_NEG: { mustBeConnected: true },
                    INA_POS: { mustBeConnected: true },
                    GND: { mustBeConnected: true, requiresGround: true },
                    INB_POS: { mustBeConnected: true },
                    INB_NEG: { mustBeConnected: true },
                    OUTB: { mustBeConnected: true },
                    VCC: {
                        mustBeConnected: true,
                        requiresPower: true,
                        requiresVoltage: "5V",
                        shouldHaveDecouplingCapacitor: true,
                        recommendedDecouplingCapacitorCapacitance: "1uF",
                    },
                }, noConnect: ["OUTA"], schPinArrangement: {
                    leftSide: {
                        pins: ["INA_NEG", "INA_POS", "INB_NEG", "INB_POS"],
                        direction: "top-to-bottom",
                    },
                    rightSide: {
                        pins: ["VCC", "OUTA", "OUTB", "GND"],
                        direction: "top-to-bottom",
                    },
                }, schSectionName: COMPARATOR_SECTION, schX: 7, schY: 3, schWidth: 2.245, schHeight: 1, pcbX: 4.3, pcbY: -5.2 }), jsx("resistor", { name: "R_PULL", resistance: "10kohm", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C17414"] }, manufacturerPartNumber: "0805W8F1002T5E", layer: "bottom", schSectionName: COMPARATOR_SECTION, schX: 13, schY: 5, schRotation: 90, pcbX: -0.4, pcbY: -10.4 }), jsx("resistor", { name: "R_PWR", resistance: "1kohm", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C17513"] }, manufacturerPartNumber: "0805W8F1001T5E", layer: "bottom", schSectionName: INDICATOR_SECTION, schX: 17, schY: 7, schRotation: 90, pcbX: -6.2, pcbY: 9 }), jsx("led", { name: "D_PWR", displayName: "PWR", color: "red", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C84256"] }, manufacturerPartNumber: "NCD0805R1", layer: "bottom", schSectionName: INDICATOR_SECTION, schX: 17, schY: 3, schRotation: 90, pcbX: -6.2, pcbY: 6.6 }), jsx("resistor", { name: "R_DO", resistance: "1kohm", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C17513"] }, manufacturerPartNumber: "0805W8F1001T5E", layer: "bottom", schSectionName: INDICATOR_SECTION, schX: 22, schY: 7, schRotation: 90, pcbX: -5.5, pcbY: -7.2 }), jsx("led", { name: "D_DO", displayName: "DOUT", color: "green", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C2297"] }, manufacturerPartNumber: "KT-0805G", layer: "bottom", schSectionName: INDICATOR_SECTION, schX: 22, schY: 3, schRotation: 90, pcbX: -5.5, pcbY: -9.5 }), jsx("capacitor", { name: "C_VCC", capacitance: "1uF", footprint: "0805", supplierPartNumbers: { jlcpcb: ["C28323"] }, manufacturerPartNumber: "CL21B105KBFNNNE", layer: "bottom", schSectionName: INDICATOR_SECTION, schX: 27, schY: 4.5, schOrientation: "vertical", pcbX: -3.5, pcbY: 11 }), jsx("pinheader", { name: "J1", pinCount: 4, pitch: "2.54mm", gender: "male", rightAngle: true, manufacturerPartNumber: "PZ254R-11-04P", supplierPartNumbers: { jlcpcb: ["C492412"] }, pinLabels: { pin1: "VCC", pin2: "GND", pin3: "DO", pin4: "AO" }, pcbPinLabels: { pin1: "VCC", pin2: "GND", pin3: "DO", pin4: "AO" }, pinAttributes: {
                    VCC: {
                        providesPower: true,
                        providesVoltage: "5V",
                        includeInBoardPinout: true,
                    },
                    GND: { providesGround: true, includeInBoardPinout: true },
                    DO: { includeInBoardPinout: true },
                    AO: { includeInBoardPinout: true },
                }, schFacingDirection: "left", schSectionName: INTERFACE_SECTION, schX: 33, schY: 3, schWidth: 0.485, pcbX: 0, pcbY: -14.4, footprint: jsx("footprint", { insertionDirection: "from_bottom", children: headerPinX.map((x, pinIndex) => (jsx(Fragment, { children: jsx("platedhole", { portHints: [`pin${pinIndex + 1}`], pcbX: x, pcbY: 0, shape: "circle", holeDiameter: "1.1mm", outerDiameter: "1.8mm" }) }, pinIndex))) }), cadModel: {
                    glbUrl: rightAngleHeaderModelUrl,
                    modelBoardNormalDirection: "z+",
                } }), jsx("trace", { name: "MQ_A1_VCC", from: ".MQ1 > .A1", to: "net.VCC_5V" }), jsx("trace", { name: "MQ_A2_VCC", from: ".MQ1 > .A2", to: "net.VCC_5V" }), jsx("trace", { name: "MQ_B1_AO", from: ".MQ1 > .B1", to: "net.AO" }), jsx("trace", { name: "MQ_B2_AO", from: ".MQ1 > .B2", to: "net.AO" }), jsx("trace", { name: "MQ_H1_VCC", from: ".MQ1 > .H1", to: "net.VCC_5V" }), jsx("trace", { name: "MQ_H2_RETURN", from: ".MQ1 > .H2", to: "net.HEATER_RETURN" }), jsx("trace", { name: "RH_RETURN", from: ".R_H > .pin1", to: "net.HEATER_RETURN" }), jsx("trace", { name: "RH_GND", from: ".R_H > .pin2", to: "net.GND" }), jsx("trace", { name: "RL_AO", from: ".R_L > .pin1", to: "net.AO" }), jsx("trace", { name: "RL_GND", from: ".R_L > .pin2", to: "net.GND" }), jsx("trace", { name: "CAO_AO", from: ".C_AO > .pin1", to: "net.AO" }), jsx("trace", { name: "CAO_GND", from: ".C_AO > .pin2", to: "net.GND" }), jsx("trace", { name: "RV1_VCC", from: ".RV1 > .pin1", to: "net.VCC_5V" }), jsx("trace", { name: "RV1_REF", from: ".RV1 > .pin2", to: "net.THRESHOLD" }), jsx("trace", { name: "RV1_GND", from: ".RV1 > .pin3", to: "net.GND" }), jsx("trace", { name: "U1_VCC", from: ".U1 > .VCC", to: "net.VCC_5V" }), jsx("trace", { name: "U1_GND", from: ".U1 > .GND", to: "net.GND" }), jsx("trace", { name: "U1_INA_NEG", from: ".U1 > .INA_NEG", to: "net.VCC_5V" }), jsx("trace", { name: "U1_INA_POS", from: ".U1 > .INA_POS", to: "net.GND" }), jsx("trace", { name: "U1_INB_NEG", from: ".U1 > .INB_NEG", to: "net.AO" }), jsx("trace", { name: "U1_INB_POS", from: ".U1 > .INB_POS", to: "net.THRESHOLD" }), jsx("trace", { name: "U1_OUTB", from: ".U1 > .OUTB", to: "net.DO" }), jsx("trace", { name: "RPULL_VCC", from: ".R_PULL > .pin1", to: "net.VCC_5V" }), jsx("trace", { name: "RPULL_DO", from: ".R_PULL > .pin2", to: "net.DO" }), jsx("trace", { name: "RPWR_VCC", from: ".R_PWR > .pin1", to: "net.VCC_5V" }), jsx("trace", { name: "RPWR_LED", from: ".R_PWR > .pin2", to: "net.PWR_LED_A" }), jsx("trace", { name: "DPWR_A", from: ".D_PWR > .anode", to: "net.PWR_LED_A" }), jsx("trace", { name: "DPWR_K", from: ".D_PWR > .cathode", to: "net.GND" }), jsx("trace", { name: "RDO_VCC", from: ".R_DO > .pin1", to: "net.VCC_5V" }), jsx("trace", { name: "RDO_LED", from: ".R_DO > .pin2", to: "net.DO_LED_A" }), jsx("trace", { name: "DDO_A", from: ".D_DO > .anode", to: "net.DO_LED_A" }), jsx("trace", { name: "DDO_K", from: ".D_DO > .cathode", to: "net.DO" }), jsx("trace", { name: "CVCC_VCC", from: ".C_VCC > .pin1", to: "net.VCC_5V" }), jsx("trace", { name: "CVCC_GND", from: ".C_VCC > .pin2", to: "net.GND" }), jsx("trace", { name: "J1_VCC", from: ".J1 > .VCC", to: "net.VCC_5V" }), jsx("trace", { name: "J1_GND", from: ".J1 > .GND", to: "net.GND" }), jsx("trace", { name: "J1_DO", from: ".J1 > .DO", to: "net.DO" }), jsx("trace", { name: "J1_AO", from: ".J1 > .AO", to: "net.AO" }), jsx("platedhole", { name: "H1", shape: "circle", holeDiameter: "3mm", outerDiameter: "4mm", pcbX: -7.5, pcbY: 13.5 }), jsx("platedhole", { name: "H2", shape: "circle", holeDiameter: "3mm", outerDiameter: "4mm", pcbX: 7.5, pcbY: 13.5 }), jsx("platedhole", { name: "H3", shape: "circle", holeDiameter: "3mm", outerDiameter: "4mm", pcbX: -7.5, pcbY: -13.5 }), jsx("platedhole", { name: "H4", shape: "circle", holeDiameter: "3mm", outerDiameter: "4mm", pcbX: 7.5, pcbY: -13.5 }), jsx("silkscreentext", { text: "MQ-135", pcbX: 0, pcbY: -8.8, fontSize: "0.8mm", anchorAlignment: "center" }), jsx("silkscreentext", { text: "FC-22", layer: "bottom", pcbX: -0.8, pcbY: 1.8, fontSize: "1mm", anchorAlignment: "center" }), jsx("silkscreentext", { text: "AO  DO  GND  VCC", layer: "bottom", pcbX: 0, pcbY: -12.6, fontSize: "0.58mm", anchorAlignment: "center" }), jsx("silkscreentext", { text: "PWR", layer: "bottom", pcbX: -6.2, pcbY: 7.9, fontSize: "0.55mm", anchorAlignment: "center" }), jsx("silkscreentext", { text: "DOUT", layer: "bottom", pcbX: -5.5, pcbY: -8.35, fontSize: "0.5mm", anchorAlignment: "center" })] }));
}

export { MQ135AirQualitySensorModule as default };