victorev/Humax-onbard-circuit

dist/index.cjs

'use strict';

var jsxRuntime = require('react/jsx-runtime');

// EV charger supervisory controller — STM32H563 (Cortex-M33), rev B
//
// Fixes vs rev A:
//  - Inline <footprint> definitions for crystal 3225, oscillator 5032,
//    magjack RJ45, and ESP32-WROOM-32 (registry names were invalid)
//  - Board enlarged to 100x80mm; all pcbX/pcbY re-spread so nothing
//    sits inside the LQFP100 courtyard or off the board edge
//  - L_BUCK given a footprint (1210)
//
// !! Inline footprints marked PLACEHOLDER are approximate geometry.
// !! Verify pad positions against each datasheet (or swap in a verified
// !! community footprint) before generating gerbers.
// !! STM32 pin numbers still need CubeMX verification (see rev A notes).
const ESP32_PITCH = 1.27;
var index = () => (jsxRuntime.jsxs("board", { width: "100mm", height: "80mm", children: [jsxRuntime.jsx("pinheader", { name: "J_PWR", pinCount: 2, footprint: "pinrow2", pinLabels: ["V5", "GND"], schX: -14, schY: 6, pcbX: -45, pcbY: 30 }), jsxRuntime.jsx("chip", { name: "U_BUCK", footprint: "sot23_8", manufacturerPartNumber: "MP2315GJ", pinLabels: { pin1: "EN", pin2: "VINB", pin3: "SW", pin4: "GNDB",
                pin5: "BST", pin6: "FB", pin7: "AAM", pin8: "NCB" }, schX: -10, schY: 6, pcbX: -30, pcbY: 30 }), jsxRuntime.jsx("inductor", { name: "L_BUCK", inductance: "4.7uH", footprint: "1210", schX: -7, schY: 7, pcbX: -21, pcbY: 30 }), jsxRuntime.jsx("capacitor", { name: "C_BST", capacitance: "0.1uF", footprint: "0603", schX: -8.5, schY: 8, pcbX: -30, pcbY: 35 }), jsxRuntime.jsx("capacitor", { name: "C_VIN", capacitance: "22uF", footprint: "0805", schX: -12, schY: 4, pcbX: -38, pcbY: 30 }), jsxRuntime.jsx("capacitor", { name: "C_V33A", capacitance: "22uF", footprint: "0805", schX: -5, schY: 4, pcbX: -13, pcbY: 30 }), jsxRuntime.jsx("resistor", { name: "R_FB1", resistance: "40.2k", footprint: "0603", schX: -6, schY: 5.5, pcbX: -21, pcbY: 24 }), jsxRuntime.jsx("resistor", { name: "R_FB2", resistance: "13.3k", footprint: "0603", schX: -6, schY: 4.5, pcbX: -13, pcbY: 24 }), jsxRuntime.jsx("net", { name: "V5" }), jsxRuntime.jsx("net", { name: "V3_3" }), jsxRuntime.jsx("net", { name: "GND" }), jsxRuntime.jsx("net", { name: "SW_NODE" }), jsxRuntime.jsx("trace", { from: ".J_PWR > .V5", to: "net.V5" }), jsxRuntime.jsx("trace", { from: ".J_PWR > .GND", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".U_BUCK > .VINB", to: "net.V5" }), jsxRuntime.jsx("trace", { from: ".U_BUCK > .EN", to: "net.V5" }), jsxRuntime.jsx("trace", { from: ".U_BUCK > .GNDB", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".U_BUCK > .SW", to: "net.SW_NODE" }), jsxRuntime.jsx("trace", { from: ".L_BUCK > .pin1", to: "net.SW_NODE" }), jsxRuntime.jsx("trace", { from: ".L_BUCK > .pin2", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".C_BST > .pin1", to: ".U_BUCK > .BST" }), jsxRuntime.jsx("trace", { from: ".C_BST > .pin2", to: "net.SW_NODE" }), jsxRuntime.jsx("trace", { from: ".C_VIN > .pin1", to: "net.V5" }), jsxRuntime.jsx("trace", { from: ".C_VIN > .pin2", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".C_V33A > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".C_V33A > .pin2", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".R_FB1 > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".R_FB1 > .pin2", to: ".U_BUCK > .FB" }), jsxRuntime.jsx("trace", { from: ".R_FB2 > .pin1", to: ".U_BUCK > .FB" }), jsxRuntime.jsx("trace", { from: ".R_FB2 > .pin2", to: "net.GND" }), jsxRuntime.jsx("chip", { name: "U1", footprint: "lqfp100", manufacturerPartNumber: "STM32H563VIT6", pinLabels: {
                pin6: "NRST",
                pin94: "BOOT0",
                pin11: "VDD1",
                pin10: "VSS1",
                pin12: "PH0_OSCIN",
                pin13: "PH1_OSCOUT",
                pin23: "PA1_REFCLK",
                pin24: "PA2_MDIO",
                pin15: "PC1_MDC",
                pin32: "PA7_CRSDV",
                pin33: "PC4_RXD0",
                pin34: "PC5_RXD1",
                pin47: "PB11_TXEN",
                pin51: "PB12_TXD0",
                pin52: "PB13_TXD1",
                pin81: "PD0_CANRX",
                pin82: "PD1_CANTX",
                pin68: "PA9_TX",
                pin69: "PA10_RX",
                pin72: "PA13_SWDIO",
                pin76: "PA14_SWCLK",
            }, schX: 0, schY: 0, pcbX: 0, pcbY: 8 }), jsxRuntime.jsx("trace", { from: ".U1 > .VDD1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".U1 > .VSS1", to: "net.GND" }), jsxRuntime.jsx("resistor", { name: "R_BOOT", resistance: "10k", footprint: "0603", schX: -3, schY: -3, pcbX: -16, pcbY: 0 }), jsxRuntime.jsx("capacitor", { name: "C_NRST", capacitance: "0.1uF", footprint: "0603", schX: -3, schY: 3, pcbX: -16, pcbY: 16 }), jsxRuntime.jsx("trace", { from: ".R_BOOT > .pin1", to: ".U1 > .BOOT0" }), jsxRuntime.jsx("trace", { from: ".R_BOOT > .pin2", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".C_NRST > .pin1", to: ".U1 > .NRST" }), jsxRuntime.jsx("trace", { from: ".C_NRST > .pin2", to: "net.GND" }), jsxRuntime.jsx("crystal", { name: "X_HSE", frequency: "8MHz", loadCapacitance: "10pF", schX: -4, schY: 1, pcbX: -16, pcbY: 8, children: jsxRuntime.jsxs("footprint", { children: [jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.4mm", height: "1.9mm", pcbX: -1.1, pcbY: 0, portHints: ["pin1"] }), jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.4mm", height: "1.9mm", pcbX: 1.1, pcbY: 0, portHints: ["pin2"] })] }) }), jsxRuntime.jsx("capacitor", { name: "C_H1", capacitance: "10pF", footprint: "0603", schX: -5.5, schY: 2, pcbX: -22, pcbY: 12 }), jsxRuntime.jsx("capacitor", { name: "C_H2", capacitance: "10pF", footprint: "0603", schX: -5.5, schY: 0, pcbX: -22, pcbY: 4 }), jsxRuntime.jsx("trace", { from: ".X_HSE > .pin1", to: ".U1 > .PH0_OSCIN" }), jsxRuntime.jsx("trace", { from: ".X_HSE > .pin2", to: ".U1 > .PH1_OSCOUT" }), jsxRuntime.jsx("trace", { from: ".C_H1 > .pin1", to: ".U1 > .PH0_OSCIN" }), jsxRuntime.jsx("trace", { from: ".C_H1 > .pin2", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".C_H2 > .pin1", to: ".U1 > .PH1_OSCOUT" }), jsxRuntime.jsx("trace", { from: ".C_H2 > .pin2", to: "net.GND" }), jsxRuntime.jsx("capacitor", { name: "C_M1", capacitance: "0.1uF", footprint: "0402", schX: 3, schY: 3, pcbX: 14, pcbY: 16 }), jsxRuntime.jsx("capacitor", { name: "C_M2", capacitance: "4.7uF", footprint: "0805", schX: 3, schY: -3, pcbX: 14, pcbY: 0 }), jsxRuntime.jsx("trace", { from: ".C_M1 > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".C_M1 > .pin2", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".C_M2 > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".C_M2 > .pin2", to: "net.GND" }), jsxRuntime.jsx("pinheader", { name: "J_SWD", pinCount: 4, footprint: "pinrow4", pinLabels: ["S3V3", "SWDIO", "SWCLK", "SGND"], schX: -8, schY: -5, pcbX: -45, pcbY: -15 }), jsxRuntime.jsx("trace", { from: ".J_SWD > .S3V3", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".J_SWD > .SWDIO", to: ".U1 > .PA13_SWDIO" }), jsxRuntime.jsx("trace", { from: ".J_SWD > .SWCLK", to: ".U1 > .PA14_SWCLK" }), jsxRuntime.jsx("trace", { from: ".J_SWD > .SGND", to: "net.GND" }), jsxRuntime.jsx("chip", { name: "U2", footprint: "qfn24", manufacturerPartNumber: "LAN8720A", pinLabels: {
                pin6: "VDD2A",
                pin7: "TXP",
                pin8: "TXN",
                pin9: "RXP",
                pin10: "RXN",
                pin12: "MDIO",
                pin13: "MDC",
                pin14: "REFCLKIN",
                pin16: "CRSDV",
                pin17: "RXD1",
                pin18: "RXD0",
                pin19: "VDDIO",
                pin20: "TXD1",
                pin21: "TXD0",
                pin22: "TXEN",
                pin24: "RSTPHY",
            }, schX: 8, schY: 2, pcbX: 28, pcbY: 14 }), jsxRuntime.jsx("chip", { name: "U_OSC", manufacturerPartNumber: "SIT2001-50MHz", pinLabels: { pin1: "OE", pin2: "OGND", pin3: "OUT", pin4: "OVDD" }, schX: 6, schY: 5, pcbX: 20, pcbY: 24, children: jsxRuntime.jsxs("footprint", { children: [jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.4mm", height: "1.2mm", pcbX: -1.85, pcbY: -1.25, portHints: ["pin1"] }), jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.4mm", height: "1.2mm", pcbX: 1.85, pcbY: -1.25, portHints: ["pin2"] }), jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.4mm", height: "1.2mm", pcbX: 1.85, pcbY: 1.25, portHints: ["pin3"] }), jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.4mm", height: "1.2mm", pcbX: -1.85, pcbY: 1.25, portHints: ["pin4"] })] }) }), jsxRuntime.jsx("net", { name: "RMII_CLK" }), jsxRuntime.jsx("trace", { from: ".U_OSC > .OVDD", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".U_OSC > .OE", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".U_OSC > .OGND", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".U_OSC > .OUT", to: "net.RMII_CLK" }), jsxRuntime.jsx("trace", { from: ".U2 > .REFCLKIN", to: "net.RMII_CLK" }), jsxRuntime.jsx("trace", { from: ".U1 > .PA1_REFCLK", to: "net.RMII_CLK" }), jsxRuntime.jsx("trace", { from: ".U2 > .VDD2A", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".U2 > .VDDIO", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".U1 > .PA2_MDIO", to: ".U2 > .MDIO" }), jsxRuntime.jsx("trace", { from: ".U1 > .PC1_MDC", to: ".U2 > .MDC" }), jsxRuntime.jsx("trace", { from: ".U1 > .PA7_CRSDV", to: ".U2 > .CRSDV" }), jsxRuntime.jsx("trace", { from: ".U1 > .PC4_RXD0", to: ".U2 > .RXD0" }), jsxRuntime.jsx("trace", { from: ".U1 > .PC5_RXD1", to: ".U2 > .RXD1" }), jsxRuntime.jsx("trace", { from: ".U1 > .PB11_TXEN", to: ".U2 > .TXEN" }), jsxRuntime.jsx("trace", { from: ".U1 > .PB12_TXD0", to: ".U2 > .TXD0" }), jsxRuntime.jsx("trace", { from: ".U1 > .PB13_TXD1", to: ".U2 > .TXD1" }), jsxRuntime.jsx("resistor", { name: "R_PHYRST", resistance: "10k", footprint: "0603", schX: 7, schY: -1, pcbX: 21, pcbY: 8 }), jsxRuntime.jsx("trace", { from: ".R_PHYRST > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".R_PHYRST > .pin2", to: ".U2 > .RSTPHY" }), jsxRuntime.jsx("capacitor", { name: "C_PHY1", capacitance: "0.1uF", footprint: "0603", schX: 9, schY: 5, pcbX: 35, pcbY: 22 }), jsxRuntime.jsx("trace", { from: ".C_PHY1 > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".C_PHY1 > .pin2", to: "net.GND" }), jsxRuntime.jsx("chip", { name: "J_ETH", manufacturerPartNumber: "HR911105A", pinLabels: { pin1: "TDP", pin2: "TDN", pin3: "RDP", pin6: "RDN", pin9: "SHIELD" }, schX: 13, schY: 2, pcbX: 44, pcbY: 14, children: jsxRuntime.jsxs("footprint", { children: [jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: -7.1, pcbY: 4, portHints: ["pin1"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: -5.1, pcbY: 4, portHints: ["pin2"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: -3.1, pcbY: 4, portHints: ["pin3"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: -1.1, pcbY: 4, portHints: ["pin4"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: 0.9, pcbY: 4, portHints: ["pin5"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: 2.9, pcbY: 4, portHints: ["pin6"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: 4.9, pcbY: 4, portHints: ["pin7"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "0.9mm", outerDiameter: "1.5mm", pcbX: 6.9, pcbY: 4, portHints: ["pin8"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "1.6mm", outerDiameter: "2.4mm", pcbX: -8, pcbY: -4, portHints: ["pin9"] }), jsxRuntime.jsx("platedhole", { shape: "circle", holeDiameter: "1.6mm", outerDiameter: "2.4mm", pcbX: 8, pcbY: -4, portHints: ["pin10"] })] }) }), jsxRuntime.jsx("trace", { from: ".U2 > .TXP", to: ".J_ETH > .TDP" }), jsxRuntime.jsx("trace", { from: ".U2 > .TXN", to: ".J_ETH > .TDN" }), jsxRuntime.jsx("trace", { from: ".U2 > .RXP", to: ".J_ETH > .RDP" }), jsxRuntime.jsx("trace", { from: ".U2 > .RXN", to: ".J_ETH > .RDN" }), jsxRuntime.jsx("trace", { from: ".J_ETH > .SHIELD", to: "net.GND" }), jsxRuntime.jsx("chip", { name: "U4", footprint: "soic8", manufacturerPartNumber: "TJA1051T/3", pinLabels: { pin1: "TXD", pin2: "GNDC", pin3: "VCC", pin4: "RXD",
                pin6: "CANL", pin7: "CANH" }, schX: 8, schY: -4, pcbX: 28, pcbY: -14 }), jsxRuntime.jsx("trace", { from: ".U4 > .VCC", to: "net.V5" }), jsxRuntime.jsx("trace", { from: ".U4 > .GNDC", to: "net.GND" }), jsxRuntime.jsx("trace", { from: ".U1 > .PD1_CANTX", to: ".U4 > .TXD" }), jsxRuntime.jsx("trace", { from: ".U4 > .RXD", to: ".U1 > .PD0_CANRX" }), jsxRuntime.jsx("capacitor", { name: "C_CAN", capacitance: "0.1uF", footprint: "0603", schX: 7, schY: -5.5, pcbX: 21, pcbY: -14 }), jsxRuntime.jsx("trace", { from: ".C_CAN > .pin1", to: "net.V5" }), jsxRuntime.jsx("trace", { from: ".C_CAN > .pin2", to: "net.GND" }), jsxRuntime.jsx("resistor", { name: "R_T1", resistance: "60", footprint: "0805", schX: 11, schY: -3, pcbX: 35, pcbY: -8 }), jsxRuntime.jsx("resistor", { name: "R_T2", resistance: "60", footprint: "0805", schX: 11, schY: -5, pcbX: 35, pcbY: -20 }), jsxRuntime.jsx("capacitor", { name: "C_T", capacitance: "4.7nF", footprint: "0603", schX: 13, schY: -4, pcbX: 41, pcbY: -14 }), jsxRuntime.jsx("trace", { from: ".U4 > .CANH", to: ".R_T1 > .pin1" }), jsxRuntime.jsx("trace", { from: ".R_T1 > .pin2", to: ".C_T > .pin1" }), jsxRuntime.jsx("trace", { from: ".C_T > .pin1", to: ".R_T2 > .pin1" }), jsxRuntime.jsx("trace", { from: ".R_T2 > .pin2", to: ".U4 > .CANL" }), jsxRuntime.jsx("trace", { from: ".C_T > .pin2", to: "net.GND" }), jsxRuntime.jsx("pinheader", { name: "J_CAN", pinCount: 3, footprint: "pinrow3", pinLabels: ["CANH", "CANL", "CGND"], schX: 13, schY: -6, pcbX: 45, pcbY: -28 }), jsxRuntime.jsx("trace", { from: ".J_CAN > .CANH", to: ".U4 > .CANH" }), jsxRuntime.jsx("trace", { from: ".J_CAN > .CANL", to: ".U4 > .CANL" }), jsxRuntime.jsx("trace", { from: ".J_CAN > .CGND", to: "net.GND" }), jsxRuntime.jsx("chip", { name: "U5", manufacturerPartNumber: "ESP32-WROOM-32E", pinLabels: { pin1: "GNDE", pin2: "VDDE", pin3: "ENE",
                pin25: "EIO0", pin34: "ETXD0", pin35: "ERXD0" }, schX: 0, schY: -7, pcbX: 0, pcbY: -26, children: jsxRuntime.jsxs("footprint", { children: [Array.from({ length: 14 }, (_, i) => (jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.5mm", height: "0.8mm", pcbX: -8.6, pcbY: 8.26 - i * ESP32_PITCH, portHints: ["pin" + (i + 1)] }, "l" + i))), Array.from({ length: 10 }, (_, i) => (jsxRuntime.jsx("smtpad", { shape: "rect", width: "0.8mm", height: "1.5mm", pcbX: -5.715 + i * ESP32_PITCH, pcbY: -11.5, portHints: ["pin" + (i + 15)] }, "b" + i))), Array.from({ length: 14 }, (_, i) => (jsxRuntime.jsx("smtpad", { shape: "rect", width: "1.5mm", height: "0.8mm", pcbX: 8.6, pcbY: -8.26 + i * ESP32_PITCH, portHints: ["pin" + (i + 25)] }, "r" + i)))] }) }), jsxRuntime.jsx("trace", { from: ".U5 > .VDDE", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".U5 > .GNDE", to: "net.GND" }), jsxRuntime.jsx("resistor", { name: "R_EEN", resistance: "10k", footprint: "0603", schX: -3, schY: -8, pcbX: -16, pcbY: -26 }), jsxRuntime.jsx("trace", { from: ".R_EEN > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".R_EEN > .pin2", to: ".U5 > .ENE" }), jsxRuntime.jsx("trace", { from: ".U1 > .PA9_TX", to: ".U5 > .ERXD0" }), jsxRuntime.jsx("trace", { from: ".U5 > .ETXD0", to: ".U1 > .PA10_RX" }), jsxRuntime.jsx("capacitor", { name: "C_E1", capacitance: "10uF", footprint: "0805", schX: 3, schY: -8, pcbX: 16, pcbY: -26 }), jsxRuntime.jsx("trace", { from: ".C_E1 > .pin1", to: "net.V3_3" }), jsxRuntime.jsx("trace", { from: ".C_E1 > .pin2", to: "net.GND" })] }));

module.exports = index;