tscircuit/ti

lib/subcircuits/EnvironmentalSensor_HDC3022.circuit.tsx

PCB

Schematic

import type { SubcircuitProps } from "@tscircuit/props";
import { HDC3022DEJR } from "../chips/HDC3022DEJR.circuit.tsx";

export const EnvironmentalSensor_HDC3022 = (props: SubcircuitProps) => (
  <subcircuit width={100} height={100} {...props}>
    <chip
      name="U2"
      manufacturerPartNumber="MCU"
      footprint="pinrow5"
      pcbX={2.1}
      pcbY={-4.85}
      pcbRotation="180deg"
      schX={4.5}
      schY={0}
      schWidth={3.2}
      schHeight={4.6}
      pinLabels={{
        pin1: "VDD",
        pin2: "SCL",
        pin3: "SDA",
        pin4: "GPIO",
        pin5: "GND",
      }}
      schPinArrangement={{
        leftSide: {
          direction: "top-to-bottom",
          pins: ["pin1", "pin2", "pin3", "pin4", "pin5"],
        },
      }}
      schPinStyle={{
        pin3: {
          topMargin: 0.25,
        },
      }}
      connections={{
        pin1: "net.VDD",
        pin2: "net.SCL",
        pin3: "net.SDA",
        pin4: "net.ALERT",
        pin5: "net.GND",
      }}
    />

    <HDC3022DEJR
      name="U1"
      pcbX={0}
      pcbY={0}
      pcbRotation="0deg"
      schX={-2.1}
      schY={0}
      schWidth={3.2}
      schHeight={4.6}
      schPinArrangement={{
        rightSide: {
          direction: "top-to-bottom",
          pins: ["VDD", "SCL", "SDA", "ALERT", "RESET", "ADDR", "ADDR1", "GND"],
        },
      }}
      schPinStyle={{
        VDD: {
          topMargin: 1.55,
        },
        SDA: {
          topMargin: 0.25,
        },
        RESET: {
          topMargin: 0.25,
        },
        ADDR: {
          topMargin: 0.45,
        },
        ADDR1: {
          topMargin: 0.25,
        },
      }}
      connections={{
        SDA: "net.SDA",
        SCL: "net.SCL",
        ALERT: "net.ALERT",
        VDD: "net.VDD",
        ADDR: "net.GND",
        ADDR1: "net.GND",
        GND: "net.GND",
        EP: "net.GND",
      }}
      noConnect={["RESET"]}
    />

    <resistor
      name="R1"
      resistance="5k"
      footprint="0402"
      pcbX={1.8}
      pcbY={2.9}
      pcbRotation="0deg"
      schX={0.7}
      schY={2.15}
      schRotation="270deg"
      connections={{
        pin1: "net.VDD",
        pin2: "net.SCL",
      }}
    />
    <resistor
      name="R2"
      resistance="5k"
      footprint="0402"
      pcbX={-1.8}
      pcbY={2.9}
      pcbRotation="0deg"
      schX={1.5}
      schY={2.15}
      schRotation="270deg"
      connections={{
        pin1: "net.VDD",
        pin2: "net.SDA",
      }}
    />
  </subcircuit>
);

export default EnvironmentalSensor_HDC3022;