tscircuit/ti

lib/chips/MX25V1635FZNQ.circuit.tsx

import type { ChipProps } from "@tscircuit/props";
import { Fragment } from "react";
import "tscircuit";

export const MX25V1635FZNQ_PIN_LABELS = {
  pin1: ["CS", "QSPI_CS"],
  pin2: ["SO_SIO1", "QSPI_D1"],
  pin3: ["WP_SIO2", "QSPI_D2"],
  pin4: ["GND", "VSS"],
  pin5: ["SI_SIO0", "QSPI_D0"],
  pin6: ["SCLK", "QSPI_CLK"],
  pin7: ["HOLD_SIO3", "QSPI_D3"],
  pin8: "VCC",
  pin9: ["EP", "EP_GND", "thermalpad"],
} as const;

const renderWson8Footprint = () => (
  <footprint>
    {[1, 2, 3, 4].map((pinNumber) => (
      <Fragment key={`left-${pinNumber}`}>
        <smtpad
          portHints={[`pin${pinNumber}`]}
          pcbX={-2.25}
          pcbY={-1.905 + (pinNumber - 1) * 1.27}
          width="0.75mm"
          height="0.5mm"
          shape="rect"
        />
      </Fragment>
    ))}
    {[5, 6, 7, 8].map((pinNumber) => (
      <Fragment key={`right-${pinNumber}`}>
        <smtpad
          portHints={[`pin${pinNumber}`]}
          pcbX={2.25}
          pcbY={1.905 - (pinNumber - 5) * 1.27}
          width="0.75mm"
          height="0.5mm"
          shape="rect"
        />
      </Fragment>
    ))}
    <smtpad
      portHints={["pin9"]}
      pcbX={0}
      pcbY={0}
      width="3.4mm"
      height="3.6mm"
      shape="rect"
    />
    <silkscreenpath
      route={[
        { x: -2.65, y: 3.15 },
        { x: 2.65, y: 3.15 },
        { x: 2.65, y: -3.15 },
        { x: -2.65, y: -3.15 },
        { x: -2.65, y: 3.15 },
      ]}
    />
    <silkscreenpath
      route={[
        { x: -2.35, y: -2.75 },
        { x: -1.95, y: -2.75 },
        { x: -2.15, y: -2.35 },
        { x: -2.35, y: -2.75 },
      ]}
    />
  </footprint>
);

/** Macronix 16 Mbit, 2.5 V serial NOR flash in the eight-lead 5 x 6 mm WSON. */
export const MX25V1635FZNQ = (
  props: ChipProps<typeof MX25V1635FZNQ_PIN_LABELS>,
) => (
  <chip
    manufacturerPartNumber="MX25V1635FZNQ"
    supplierPartNumbers={{ jlcpcb: ["C5139359"] }}
    footprint={renderWson8Footprint()}
    pinLabels={MX25V1635FZNQ_PIN_LABELS}
    schPinArrangement={{
      leftSide: [8, 1, 6, 5, 2, 3, 7],
      rightSide: [9, 4],
    }}
    pinAttributes={{
      pin4: { requiresGround: true },
      pin8: { requiresPower: true },
      pin9: { requiresGround: true },
    }}
    {...props}
  />
);

export default MX25V1635FZNQ;