tscircuit/sparkfun-boards
This code defines a detailed PCB schematic and physical footprint layout for various embedded hardware modules, mapping electrical pins, mechanical mounting holes, and silk-screen annotations for manufacturing and assembly.
- Version
- 0.0.32
- License
- unset
- Stars
- 3
boards/SparkFun-Proximity-Sensor-Breakout-20cm-VCNL4040-(Qwiic)/SparkFun-Proximity-Sensor-Breakout-20cm-VCNL4040-Qwiic.circuit.tsx
import { VCNL4040M3OE } from "./VCNL4040M3OE"
import { SM04B_SRSS_TB_LF__SN } from "./SM04B_SRSS_TB_LF__SN"
import { sel } from "tscircuit"
const JPPinlabel = {
pin4: ["SCL"],
pin3: ["SDA"],
pin2: ["VDD"],
pin1: ["GND"],
}
export default () => {
return (
<board width="25.40mm" height="25.40mm">
<VCNL4040M3OE
name="U1"
connections={{
pin8: sel.R5.pin1,
pin7: sel.R4.pin1,
pin6: sel.R1.pin1,
pin5: sel.U1.pin2,
}}
/>
<capacitor
name="C1"
capacitance="2.2uF"
schRotation={-90}
schX={-4}
footprint="cap0603"
pcbX={5.08}
pcbRotation={-90}
connections={{ pin2: sel.net().GND, pin1: sel.net().VDD }}
/>
<capacitor
name="C4"
schRotation={90}
schX={-5}
capacitance="0.1uF"
footprint="cap0603"
pcbY={-3}
pcbRotation={180}
connections={{ pin1: sel.net().GND, pin2: sel.net().VDD }}
/>
<resistor
name="R1"
resistance="10k"
schRotation={90}
schX={3}
schY={1.3}
footprint="res0603"
pcbX={-5.08}
pcbRotation={90}
connections={{ pin2: sel.JP9.pin2 }}
/>
<resistor
name="R3"
resistance="1k"
connections={{ pin2: sel.net().VDD, pin1: sel.D1.pin1 }}
schRotation={90}
schX={-7}
footprint="0603"
schY={1.3}
pcbX={-9.525}
pcbY={-8.604}
/>
<resistor
name="R4"
resistance="2.2k"
schY={1.3}
schX={4}
schRotation={90}
footprint="0603"
pcbX={-2.54}
pcbY={3.81}
pcbRotation={180}
/>
<resistor
name="R5"
resistance="2.2k"
footprint="0603"
schY={1.3}
schX={5.5}
schRotation={90}
pcbX={2.54}
pcbY={3.81}
/>
<solderjumper
name="JP1"
schRotation={180}
schY={2.5}
schX={4.75}
footprint="solderjumper3_bridged123_p1.0414_pw0.635_ph1.27"
layer={"bottom"}
pcbX={1.016}
pcbY={3.81}
bridgedPins={[["1", "2", "3"]]}
connections={{
pin2: sel.net().VDD,
pin3: sel.R4.pin2,
pin1: sel.R5.pin2,
}}
/>
<solderjumper
connections={{ pin1: sel.net().V3_3 }}
name="JP9"
schX={3}
schY={2.5}
schRotation={-90}
footprint="solderjumper2_bridged12_p1.0414_pw0.6604_ph1.27"
layer={"bottom"}
pcbX={-8.382}
pcbY={-6.35}
bridgedPins={[["1", "2"]]}
/>
<led
connections={{ pin2: sel.net().GND }}
name="D1"
footprint="0603"
pcbX={-9.525}
pcbY={-6.604}
schRotation={-90}
schX={-7}
/>
<jumper
name="JP3"
schWidth={0.7}
pinLabels={JPPinlabel}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin4", "pin3", "pin2", "pin1"],
},
}}
schY={-6}
schDirection="left"
footprint="pinrow4_id1.016mm_od1.88mm_nosquareplating_pinlabeltextalignright_pinlabelverticallyinverted_pinlabelorthogonal"
pcbY={-11.43}
pcbX={-1.25}
/>
<jumper
name="JP4"
pinLabels={{
pin1: ["N_INT"],
}}
manufacturerPartNumber="CONN_01PTH_NO_SILK_YES_STOP"
schPinArrangement={{
leftSide: { direction: "top-to-bottom", pins: ["pin1"] },
}}
connections={{ pin1: sel.net().N_INT }}
schY={-5.7}
schX={2}
footprint="pinrow1_id1.016mm_od1.88mm_nosquareplating_pinlabeltextalignright_pinlabelverticallyinverted_pinlabelorthogonal"
pcbY={-11.43}
pcbX={5.08}
/>
<SM04B_SRSS_TB_LF__SN
name="JP2"
pcbRotation={90}
pcbX={9.5}
schWidth={0.7}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin4", "pin3", "pin2", "pin1"],
},
}}
schY={-6}
schX={-3}
/>
<SM04B_SRSS_TB_LF__SN
name="JP5"
pcbRotation={-90}
pcbX={-9.5}
schWidth={0.7}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin4", "pin3", "pin2", "pin1"],
},
}}
schY={-6}
schX={-6}
/>
<hole diameter={3.302} pcbX={-10.16} pcbY={10.16} />
<hole diameter={3.302} pcbX={10.16} pcbY={10.16} />
<silkscreentext text="sparkfun" layer="top" fontSize={2} pcbY={10} />
<silkscreentext text="sparkfun" layer="bottom" fontSize={2} pcbY={10} />
<silkscreentext
text="Qwicc Distance"
layer="top"
fontSize={1}
pcbY={8.5}
/>
<silkscreentext text="VCNL 4040" layer="top" fontSize={1} pcbY={7.5} />
<silkscreentext
text="PWR"
layer="top"
fontSize={1.4}
pcbY={-4.5}
pcbX={-9.5}
/>
<silkscreentext text="I2C" layer="bottom" fontSize={1.4} pcbY={7} />
<silkscreentext
text="INT"
layer="bottom"
fontSize={1.4}
pcbY={-4.3}
pcbX={-8.8}
/>
<silkscreentext
text="Qwicc Distance"
layer="bottom"
fontSize={1}
pcbY={0}
/>
<silkscreentext text="VCNL 4040" layer="bottom" fontSize={1} pcbY={-1} />
<silkscreentext text="ADDR 0x60" layer="bottom" fontSize={1} pcbY={-8} />
<netlabel
net="SDA"
anchorSide="left"
schX={6}
schY={0.43}
connectsTo={sel.U1.SDA}
/>
<netlabel
net="SCL"
anchorSide="left"
schX={6}
schY={0.23}
connectsTo={[sel.U1.SCL]}
/>
<netlabel
net="INT"
anchorSide="left"
schX={6}
schY={-0.17}
connectsTo={[sel.U1.INT]}
/>
<netlabel
net="VDD"
anchorSide="bottom"
schX={-2}
schY={1.3}
connectsTo={[sel.U1.VDD]}
/>
<netlabel
net="VDD"
anchorSide="bottom"
schX={2}
schY={1.3}
connectsTo={[sel.U1.pin4]}
/>
<netlabel
net="GND"
anchorSide="top"
schX={-2}
schY={-1.3}
connectsTo={[sel.U1.pin1]}
/>
<netlabel
net="SDA"
anchorSide="right"
schX={-1}
schY={-5.9}
connectsTo={sel.JP3.SDA}
/>
<netlabel
net="SCL"
anchorSide="right"
schX={-1}
schY={-5.7}
connectsTo={[sel.JP3.SCL]}
/>
<netlabel
net="SDA"
anchorSide="right"
schX={-4}
schY={-5.9}
connectsTo={sel.JP2.SDA}
/>
<netlabel
net="SCL"
anchorSide="right"
schX={-4}
schY={-5.7}
connectsTo={[sel.JP2.SCL]}
/>
<netlabel
net="SDA"
anchorSide="right"
schX={-7}
schY={-5.9}
connectsTo={sel.JP5.SDA}
/>
<netlabel
net="SCL"
anchorSide="right"
schX={-7}
schY={-5.7}
connectsTo={[sel.JP5.SCL]}
/>
<netlabel
net="V3_3"
anchorSide="bottom"
schX={-6.9}
schY={-5.4}
connectsTo={[sel.JP5.VDD]}
/>
<netlabel
net="GND"
anchorSide="top"
schX={-6.9}
schY={-6.6}
connectsTo={[sel.JP5.GND]}
/>
<netlabel
net="V3_3"
anchorSide="bottom"
schX={-3.9}
schY={-5.4}
connectsTo={[sel.JP2.VDD]}
/>
<netlabel
net="GND"
anchorSide="top"
schX={-3.9}
schY={-6.6}
connectsTo={[sel.JP2.GND]}
/>
<netlabel
net="V3_3"
anchorSide="bottom"
schX={-0.9}
schY={-5.4}
connectsTo={[sel.JP3.VDD]}
/>
<netlabel
net="GND"
anchorSide="top"
schX={-0.9}
schY={-6.6}
connectsTo={[sel.JP3.GND]}
/>
<schematictext
text="VCNL4040 IR Proximity Sensor"
color="gray"
fontSize={0.4}
schY={6}
schX={-2}
/>
<schematictext
text="VIN: 2.5V-3.6V"
color="gray"
fontSize={0.2}
schY={5.5}
schX={-4}
/>
<schematictext
text="Clear JP9 to remove"
color="gray"
fontSize={0.2}
schY={3}
schX={0}
/>
<schematictext
text="pull-up from INT"
color="gray"
fontSize={0.2}
schY={2.7}
schX={0}
/>
<schematictext
text="Clear I2C Jumper to remove"
color="gray"
fontSize={0.2}
schY={2.4}
schX={8.2}
/>
<schematictext
text="I2C Pull-ups from bus"
color="gray"
fontSize={0.2}
schY={2.1}
schX={8}
/>
<schematictext
text="7-bit unshifted 12C address: 0x60"
color="gray"
fontSize={0.2}
schY={-2.5}
schX={-1.5}
/>
<schematictext
text="JUMPER-SMT_3_2-NC_TRACE_SILK"
color="gray"
schRotation={-90}
fontSize={0.2}
schY={1}
schX={4.8}
/>
<schematictext
text="Connections"
color="gray"
fontSize={0.3}
schY={-4}
schX={-3}
/>
</board>
)
}