tscircuit/sparkfun-boards
This code defines a detailed PCB schematic and physical footprint layout for various embedded hardware modules, mapping electrical pins, mechanical mounting holes, and silk-screen annotations for manufacturing and assembly.
- Version
- 0.0.32
- License
- unset
- Stars
- 3
boards/SparkFun-CO2-Humidity-And-Temperature-Sensor-SCD41/SparkFun-CO2-Humidity-And-Temperature-Sensor-SCD41.circuit.tsx
import { SCD41_D_R1 } from "./ SCD41_D_R1"
import { sel } from "tscircuit"
import { SM04B_SRSS_TB_LF__SN } from "./SM04B_SRSS_TB_LF__SN"
export default () => (
<board width="25.4mm" height="25.4mm">
<silkscreentext text="SCD40" pcbX={10} pcbY={7.3} layer="top" />
<silkscreentext text="SCD41" pcbX={10} pcbY={5.3} layer="top" />
<silkscreentext text="qwiic" pcbX={-10} pcbY={-5.3} layer="top" />
<silkscreentext
text="PWR"
pcbX={-8}
pcbRotation={90}
pcbY={5.3}
layer="top"
/>
<silkscreentext text="qwiic CO2 Sensor" pcbX={0} pcbY={11} layer="top" />
<silkscreentext text="Qwiic CO2 Sensor" pcbX={0} pcbY={0} layer="bottom" />
<schematictext
schX={0}
schY={-1.3}
text="7-bit unshifted address: 0x62"
color="gray"
fontSize={0.15}
/>
<schematictext
schX={0}
schY={3.9}
text="Input: 2.4V-5.5V"
color="gray"
fontSize={0.15}
/>
<schematictext
schX={0}
schY={3.7}
text="This board runs 3.3V only."
color="gray"
fontSize={0.15}
/>
<schematictext
schX={-8}
schY={2.5}
text="Cut Jumper to"
color="gray"
fontSize={0.15}
/>
<schematictext
schX={-8}
schY={2.3}
text="disable LED"
color="gray"
fontSize={0.15}
/>
<schematictext
schX={-8}
schY={4.2}
text="Power LED"
color="red"
fontSize={0.25}
/>
<schematictext
schX={0}
schY={4.2}
text="SCD4X CO2 Sensor"
color="red"
fontSize={0.25}
/>
<schematictext
schX={8}
schY={4.2}
text="SCD4X CO2 Sensor"
color="red"
fontSize={0.25}
/>
<schematictext
schX={-8}
schY={-2.8}
text="Part Number"
color="red"
fontSize={0.25}
/>
<chip
name="U6"
pcbX={7.087}
pcbY={7.112}
schX={-8}
manufacturerPartNumber="SCD40_D_R1"
schY={-3.6}
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="0mm"
pcbY="0mm"
width="1.676mm"
height="1.27mm"
shape="rect"
/>
</footprint>
}
/>
<chip
name="U7"
pcbX={7.087}
pcbY={5.3}
schX={-8}
manufacturerPartNumber="SCD41_D_R1"
schY={-4.8}
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="0mm"
pcbY="0mm"
width="1.676mm"
height="1.27mm"
shape="rect"
/>
</footprint>
}
/>
<SM04B_SRSS_TB_LF__SN
name="JP4"
pcbX="9.7"
pcbRotation={90}
schX={8}
schY={2}
connections={{
pin4: sel.net.SCL,
pin3: sel.net.SDA,
pin2: sel.net.V3_3,
pin1: sel.net.GND,
}}
/>
<SM04B_SRSS_TB_LF__SN
name="JP5"
pcbX="-9.7"
pcbRotation={-90}
schX={8}
schY={0}
connections={{
pin4: sel.net.SCL,
pin3: sel.net.SDA,
pin2: sel.net.V3_3,
pin1: sel.net.GND,
}}
/>
<group>
<SCD41_D_R1 name="U1" schX={0} schY={0} />
<capacitor
name="C1"
capacitance="0.1uF"
footprint="0603"
pcbX={-2.032}
pcbY={6.35}
schX={-2.5}
schY={0}
schRotation={-90}
connections={{ pin2: [sel.net.GND], pin1: [sel.net.V3_3] }}
/>
<capacitor
name="C2"
capacitance="4.7uF"
footprint="0603"
schX={-4}
schY={0}
pcbX={2.032}
pcbY={6.35}
connections={{ pin2: sel.net.GND, pin1: sel.net.V3_3 }}
schRotation={-90}
pcbRotation={180}
/>
<resistor
name="R1"
pcbX={9.652}
pcbY={-4.572}
schX={2.8}
schY={1}
resistance="2.2k"
footprint="0603"
schRotation={90}
connections={{ pin1: sel.net.SCL, pin2: sel.JP1.pin3 }}
/>
<resistor
name="R2"
pcbX={9.652}
pcbY={-6.35}
schX={4.2}
schY={1}
resistance="2.2k"
footprint="0603"
schRotation={90}
connections={{ pin1: sel.net.SDA, pin2: sel.JP1.pin1 }}
/>
<silkscreentext
text="PLED"
pcbX={-9.5}
pcbY={2}
pcbRotation={-90}
layer="bottom"
/>
<led
pcbX={-9.906}
pcbY={4.572}
schX={-8}
schY={-0.8}
name="D1"
color="RED"
footprint="0603"
schRotation={-90}
connections={{ pin2: sel.net.GND }}
/>
<solderjumper
pcbX={9.906}
pcbY={-6.502}
name="JP1"
schY={2}
schX={3.5}
footprint="solderjumper3_bridged123_pw0.66_pl1.270_p1"
layer="bottom"
bridgedPins={[["1", "2", "3"]]}
connections={{ pin2: sel.net.V3_3 }}
pcbRotation={-90}
schRotation={180}
/>
<silkscreentext
text="I2C"
pcbRotation={-90}
pcbX={8}
pcbY={-5.5}
layer="bottom"
/>
</group>
<group>
<resistor
name="R3"
pcbX={-9.906}
pcbY={6.35}
schX={-8}
schY={0.8}
resistance="4.7k"
footprint="0603"
schRotation={90}
connections={{ pin1: sel.D1.pin1, pin2: sel.JP2.pin1 }}
/>
<solderjumper
name="JP2"
schX={-8}
schY={2}
pcbRotation={180}
pcbX={-10.033}
pcbY={5.207}
footprint="solderjumper2_bridged12_pw0.66_pl1.270_p1"
layer="bottom"
bridgedPins={[["1", "2"]]}
schRotation={90}
connections={{ pin2: sel.net.V3_3 }}
/>
</group>
<jumper
schWidth={0.7}
cadModel={null}
schX={8}
schPinArrangement={{
leftSide: {
direction: "bottom-to-top",
pins: ["GND", "VDD", "SDA", "SCL"],
},
}}
schY={-2}
schDirection="left"
pinLabels={{ pin1: ["GND"], pin2: ["VDD"], pin3: ["SDA"], pin4: ["SCL"] }}
pcbX={0}
pcbY={-11.5}
name="JP3"
footprint="pinrow4_id1.016_od1.88_nosquareplating_pinlabeltextalignright_pinlabelorthogonal_doublesidedpinlabel_pinlabelverticallyinverted"
connections={{
pin3: sel.net.SDA,
pin4: sel.net.SCL,
pin2: sel.net.V3_3,
pin1: sel.net.GND,
}}
/>
<hole diameter={3.302} pcbX={-10.16} pcbY={-10.16} />
<hole diameter={3.302} pcbX={10.16} pcbY={-10.16} />
<hole diameter={3.302} pcbX={-10.16} pcbY={10.16} />
<hole diameter={3.302} pcbX={10.16} pcbY={10.16} />
</board>
)