tscircuit/sparkfun-boards

boards/SparkFun-Altitude-Pressure-Sensor-Breakout-MPL3115A2/SparkFun-Altitude-Pressure-Sensor-Breakout-MPL3115A2.circuit.tsx

import { MPL3115A2R1 } from "./imports/MPL3115A2R1"
import { sel } from "tscircuit"

const jumperPinLabels = {
  pin1: ["INT2"],
  pin2: ["INT1"],
  pin3: ["SDA"],
  pin4: ["SCL"],
  pin5: ["VCC"],
  pin6: ["GND"],
}
export default () => (
  <board width="15.24mm" height="17.78mm">
    <capacitor
      name="C1"
      pcbX={1.27}
      pcbY={0}
      footprint="cap0402"
      capacitance="0.1uF"
      pcbRotation={-90}
      schX={0}
      schY={3.05}
      schRotation={-90}
    />
    <capacitor
      name="C2"
      connections={{ pin2: sel.C1.pin2 }}
      pcbX={5.08}
      pcbY={1.27}
      pcbRotation={-90}
      polarized
      footprint="cap1206"
      capacitance="10uF"
      schX={-1}
      schY={3.05}
      schRotation={-90}
    />
    <capacitor
      name="C4"
      pcbX={2.54}
      pcbY={0}
      footprint="cap0402"
      capacitance="1uF"
      pcbRotation={-90}
      schX={1.2}
      schY={3.05}
      schRotation={-90}
    />
    <schematictext
      text="VCC = 3.6V Max"
      fontSize={0.2}
      color="gray"
      schY={-2}
    />
    <schematictext
      text="Slave Address: 0x60"
      fontSize={0.2}
      color="gray"
      schY={-2.3}
    />
    <schematictext
      text="Read Address: 0xC1"
      fontSize={0.2}
      color="gray"
      schY={-2.6}
    />
    <schematictext
      text="Write Address: 0xC0"
      fontSize={0.2}
      color="gray"
      schY={-2.9}
    />
    <silkscreentext text="MPL3115A2" fontSize={1.5} layer="bottom" pcbY={1} />
    <silkscreentext text="Altitude" fontSize={1.5} layer="bottom" pcbY={-0.5} />
    <silkscreentext text="Sensor" fontSize={1.5} layer="bottom" pcbY={-2} />

    <netlabel
      net="VCC"
      anchorSide="bottom"
      connectsTo={[sel.C1.pin1, sel.C2.pin1, sel.C4.pin1]}
      schY={4}
    />
    <netlabel
      net="GND"
      anchorSide="top"
      connectsTo={[sel.C1.pin2, sel.C4.pin2]}
      schY={2.1}
    />
    <MPL3115A2R1
      name="U1"
      pcbRotation={90}
      pcbY={5.08}
      schX={0}
      schY={0}
      connections={{
        VDD: sel.net().VCC,
        VDDIO: sel.net().VCC,
        GND: sel.net().GND,
        INT1: sel.net().INT1,
        INT2: sel.net().INT2,
        SCL: sel.net().SCL,
        SDA: sel.net().SDA,
      }}
    />
    <resistor
      name="R1"
      pcbX={-1.27}
      pcbY={0}
      resistance="1k"
      footprint="0402"
      pcbRotation={90}
      schX={2}
      schY={1.3}
      schRotation={-90}
      connections={{ pin2: sel.net().SCL }}
    />
    <resistor
      name="R2"
      pcbX={-2.54}
      pcbY={0}
      resistance="1k"
      footprint="0402"
      pcbRotation={90}
      schX={2.8}
      schY={1.3}
      schRotation={-90}
      connections={{ pin2: sel.net().SDA }}
    />
    <capacitor
      name="C3"
      pcbX={0}
      pcbY={0}
      footprint="cap0402"
      capacitance="0.1uF"
      pcbRotation={-90}
      schX={-2.8}
      schY={-0.7}
      schRotation={-90}
      connections={{ pin1: sel.U1.pin2, pin2: sel.net().GND }}
    />
    <netlabel
      net="VCC"
      anchorSide="bottom"
      connectsTo={[sel.R1.pin1, sel.R2.pin1]}
      schY={2}
      schX={2.5}
    />
    <jumper
      name="JP4"
      schWidth={0.6}
      pcbX={0}
      pcbY={-7.62}
      schX={-5.1}
      schY={1}
      footprint="pinrow6_id1.016_od1.88_pinlabeltextalignright_pinlabelorthogonal_pinlabelverticallyinverted_nosquareplating"
      schDirection="left"
      pinLabels={jumperPinLabels}
      cadModel={null}
      manufacturerPartNumber="M06SIP"
      connections={{
        INT2: sel.net().INT2,
        INT1: sel.net().INT1,
        SDA: sel.net().SDA,
        SCL: sel.net().SCL,
        VCC: sel.net().VCC,
        GND: sel.net().GND,
      }}
    />
    <hole diameter={3.302} pcbY={6.35} pcbX={5.08} />
    <hole diameter={3.302} pcbY={6.35} pcbX={-5.08} />
  </board>
)