tscircuit/sparkfun-boards
This code defines a detailed PCB schematic and physical footprint layout for various embedded hardware modules, mapping electrical pins, mechanical mounting holes, and silk-screen annotations for manufacturing and assembly.
- Version
- 0.0.32
- License
- unset
- Stars
- 3
boards/SparkFun-Air-Velocity-Sensor-Breakout-FS3000-1005/SparkFun-Air-Velocity-Sensor-Breakout-FS3000-1005.circuit.tsx
import { FS3000_1005 } from "./imports/FS3000_1005"
import { SM04B_SRSS_TB_LF__SN_ } from "./imports/SM04B_SRSS_TB_LF__SN_"
import { sel } from "tscircuit"
export default () => {
return (
<board width={25.4} height={25.4}>
<FS3000_1005
name="U1"
pcbY={8.128}
connections={{
pin1: [sel.JP3.pin2, sel.C2.pin1],
pin7: sel.net.SCL,
pin6: sel.net.SDA,
}}
/>
<capacitor
name="C1"
schRotation={-90}
schX={-6}
schY={-0.5}
capacitance="0.1uF"
footprint="cap0402"
pcbRotation={-90}
pcbX={-5.232}
pcbY={8.89}
connections={{ pin1: sel.JP3.pin1, pin2: sel.net().GND }}
/>
<netlabel
net="V3_3"
schX={-6.3}
anchorSide="bottom"
schY={0.5}
connectsTo={sel.C1.pin1}
/>
<capacitor
name="C2"
capacitance="0.1uF"
footprint="cap0402"
pcbRotation={90}
schRotation={-90}
schX={-3}
schY={-0.5}
pcbX={-5.232}
pcbY={11.176}
connections={{ pin2: sel.net().GND }}
/>
<netlabel net="ADC_REF" schX={-3.3} schY={0.5} connectsTo={sel.U1.pin1} />
<netlabel
net="GND"
anchorSide="top"
schX={-1.8}
schY={-1.05}
connectsTo={sel.U1.pin3}
/>
<capacitor
name="C3"
schX={2.3}
connections={{ pin1: sel.U1.pin9, pin2: sel.U1.pin8 }}
schY={-0.5}
schRotation={-90}
capacitance="0.1uF"
footprint="cap0402"
pcbRotation={-90}
pcbX={5.232}
pcbY={8.89}
/>
<capacitor
name="C4"
schX={3}
connections={{ pin1: sel.U1.pin10, pin2: sel.net().GND }}
schRotation={-90}
capacitance="1uF"
footprint="cap0402"
pcbRotation={90}
pcbX={5.232}
pcbY={11.176}
/>
<resistor
name="R3"
connections={{ pin1: sel.net().SDA }}
schRotation={90}
resistance="2.2k"
footprint="0402"
schY={1}
schX={8.7}
pcbX={8.89}
pcbY={-5.08}
/>
<resistor
name="R4"
connections={{ pin1: sel.net().SCL }}
schRotation={90}
resistance="2.2k"
footprint="0402"
schY={1}
schX={7.3}
pcbX={8.89}
pcbY={-6.35}
/>
<resistor
name="R5"
connections={{ pin2: sel.D2.pin1 }}
schX={5.5}
schY={-9.5}
schRotation={-90}
resistance="1k"
footprint="0402"
pcbX={-7.671}
pcbY={-6.147}
pcbRotation={90}
/>
<led
name="D2"
connections={{ pin2: sel.net().GND }}
schX={5.5}
schY={-11}
schRotation={-90}
color="RED"
footprint="0603"
pcbRotation={180}
pcbX={-10.16}
pcbY={-6.045}
/>
<solderjumper
schRotation={180}
connections={{
pin3: sel.R4.pin2,
pin1: sel.R3.pin2,
pin2: sel.net().V3_3,
}}
bridgedPins={[["1"], ["2"], ["3"]]}
schX={8}
schY={2}
pcbX={11.201}
pcbY={-7.264}
name="JP1"
footprint="solderjumper3_bridged123_pw0.66_pl1.270_p1"
pcbRotation={-90}
layer="bottom"
/>
<solderjumper
connections={{ pin1: sel.R5.pin1, pin2: sel.net().V3_3 }}
pcbX={-11.57}
bridgedPins={[["1"], ["2"]]}
schRotation={90}
pcbY={-4.699}
schX={5.5}
schY={-8}
name="JP2"
footprint="solderjumper2_bridged12_pw0.66_pl1.270_p1"
pcbRotation={180}
layer="bottom"
/>
<solderjumper
bridgedPins={[["1"], ["2"]]}
connections={{ pin1: [sel.U1.pin2] }}
schX={-3.1}
schY={1.5}
pcbX={-6.871}
pcbY={11.3}
name="JP3"
footprint="solderjumper2_bridged12_pw0.66_pl1.270_p1"
pcbRotation={180}
layer="bottom"
/>
<schematictext
text="I2C Pullup jumper."
color="gray"
anchor="left"
schX={9}
schY={3}
fontSize={0.15}
/>
<schematictext
text="Cut traces to remove"
color="gray"
anchor="left"
schX={9}
schY={2.8}
fontSize={0.15}
/>
<schematictext
text="pullup resisitors from circuit."
color="gray"
anchor="left"
schX={9}
schY={2.6}
fontSize={0.15}
/>
<schematictext
text="JUMPER-SMT_3_2-N TRACE_SILIK"
color="gray"
schRotation={-90}
anchor="left"
schX={8}
schY={-0.9}
fontSize={0.15}
/>
<schematictext
text="Qwiic/12C Connectors"
color="red"
anchor="left"
schX={-7}
schY={-5}
fontSize={0.3}
/>
<schematictext
text="Power LED"
color="red"
anchor="left"
schX={4}
schY={-5}
fontSize={0.3}
/>
<schematictext
text="Cut the trace"
color="gray"
anchor="left"
schX={5}
schY={-7.5}
fontSize={0.15}
/>
<schematictext
text="to disable LED"
color="gray"
anchor="left"
schX={5}
schY={-7.7}
fontSize={0.15}
/>
<schematictext
text="FS3000 Air Velocity Sensor Module"
color="red"
anchor="left"
schX={-7}
schY={5}
fontSize={0.3}
/>
<schematictext
text="12C Pullups"
color="red"
anchor="left"
schX={6}
schY={5}
fontSize={0.3}
/>
<schematictext
text="VCC RANGE: 3.3V (QWIIC)"
color="gray"
anchor="left"
schX={-7}
schY={4.7}
fontSize={0.15}
/>
<schematictext
text="Cut ADC-REF jumper to apply your"
color="gray"
anchor="left"
schX={1}
schY={3}
fontSize={0.15}
/>
<schematictext
text="own custom ADC reference input"
color="gray"
anchor="left"
schX={1}
schY={2.8}
fontSize={0.15}
/>
<schematictext
text="voltage on ADC-REF Header pin."
color="gray"
anchor="left"
schX={1}
schY={2.6}
fontSize={0.15}
/>
<schematictext
text="JUMPER-SMT_2_NIC_TRACE_SILK"
color="gray"
anchor="left"
schX={-3.1}
schY={1}
fontSize={0.15}
/>
<schematictext
text="VDD range: 3.3-5.5V"
color="gray"
anchor="left"
schX={-1}
schY={-1}
fontSize={0.15}
/>
<schematictext
text="7-Bit 12C Address: 0x28"
color="gray"
anchor="left"
schX={-1.5}
schY={-2}
fontSize={0.15}
/>
<silkscreentext text="<--AIRFLOW--" pcbRotation={90} pcbX={7} pcbY={8} />
<silkscreentext
text="<--AIRFLOW--"
pcbRotation={90}
pcbX={0}
layer="bottom"
pcbY={8}
/>
<silkscreentext
text="ADC-REF"
pcbRotation={90}
pcbX={-6.5}
layer="bottom"
pcbY={6}
/>
<silkscreentext text="1005" pcbX={10.5} pcbY={6} />
<silkscreentext text="1015" pcbX={10.5} pcbY={5} />
<silkscreentext text="Air Velocity" pcbY={-2} />
<silkscreentext text="Sensor" pcbY={-3.5} />
<silkscreentext text="FS3000" pcbY={-5} />
<silkscreentext text="PWR" pcbX={-10} pcbY={-4.2} />
<silkscreentext text="qwiic" pcbX={-10} pcbY={4.2} />
<silkscreentext
text="Air"
pcbY={6}
pcbX={6}
layer="bottom"
fontSize={1.5}
/>
<silkscreentext
text="Velocity"
pcbY={4.5}
pcbX={6}
layer="bottom"
fontSize={1.5}
/>
<silkscreentext
text="Sensor"
pcbY={3}
pcbX={6}
layer="bottom"
fontSize={1.5}
/>
<silkscreentext
text="FS3000"
pcbY={1.5}
pcbX={6}
layer="bottom"
fontSize={1.5}
/>
<silkscreentext
text="I2C ADD: 0x28"
pcbY={0}
pcbX={6}
layer="bottom"
fontSize={1.5}
/>
<silkscreentext
text="LED"
pcbX={-11}
pcbY={-2}
pcbRotation={90}
layer="bottom"
/>
<silkscreentext
text="I2C"
pcbX={9}
pcbY={-6.3}
pcbRotation={90}
layer="bottom"
/>
<silkscreentext text="qwiic" pcbX={-10} pcbY={4.2} layer="bottom" />
<SM04B_SRSS_TB_LF__SN_
schX={-1}
schY={-8}
name="JP6"
pcbX={9.5}
pcbRotation={90}
/>
<netlabel
net="V3_3"
schX={-5}
schY={-7.5}
connectsTo={sel.JP7.pin2}
anchorSide="bottom"
/>
<netlabel
net="SCL"
schX={-5.2}
schY={-7.7}
connectsTo={sel.JP7.pin4}
anchorSide="right"
/>
<netlabel
net="SDA"
schX={-5.2}
schY={-7.9}
connectsTo={sel.JP7.pin3}
anchorSide="right"
/>
<netlabel
net="GND"
schX={-5}
schY={-8.5}
connectsTo={sel.JP7.pin1}
anchorSide="top"
/>
<netlabel
net="V3_3"
schX={-2}
schY={-7.5}
connectsTo={sel.JP6.pin2}
anchorSide="bottom"
/>
<netlabel
net="SCL"
schX={-2.2}
schY={-7.7}
connectsTo={sel.JP6.pin4}
anchorSide="right"
/>
<netlabel
net="SDA"
schX={-2.2}
schY={-7.9}
connectsTo={sel.JP6.pin3}
anchorSide="right"
/>
<netlabel
net="GND"
schX={-2}
schY={-8.5}
connectsTo={sel.JP6.pin1}
anchorSide="top"
/>
<SM04B_SRSS_TB_LF__SN_
name="JP7"
schX={-4}
schY={-8}
pcbX={-9.5}
pcbRotation={-90}
/>
<hole diameter={3.302} pcbX={10.16} pcbY={-10.16} />
<hole diameter={3.302} pcbX={-10.16} pcbY={-10.16} />
<hole diameter={3.302} pcbX={-10.16} pcbY={10.16} />
<hole diameter={3.302} pcbX={10.16} pcbY={10.16} />
<jumper
name="JP4"
schWidth={0.7}
connections={{ pin1: sel.net().VCM, pin2: sel.net().ADC_REF }}
schDirection="left"
schX={-4}
schY={-13}
pinLabels={{
pin1: ["VCM"],
pin2: ["ADCR"],
}}
cadModel={null}
footprint="pinrow2_doublesidedpinlabel_pinlabeltextalignright_pinlabelorthogonal_pinlabelverticallyinverted_nosquareplating_id1.016_od1.88_p2.54"
pcbX={5.08}
pcbY={-11.43}
/>
<jumper
name="JP5"
schWidth={0.7}
schX={-4}
schY={-11}
schDirection="left"
pinLabels={{
pin1: ["GND"],
pin2: ["V3_3"],
pin3: ["SDA"],
pin4: ["SCL"],
}}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["pin4", "pin3", "pin2", "pin1"],
},
}}
cadModel={null}
footprint="pinrow4_doublesidedpinlabel_pinlabeltextalignright_pinlabelorthogonal_pinlabelverticallyinverted_nosquareplating_id1.016_od1.88_p2.54"
pcbX={-2.54}
pcbY={-11.43}
/>
<netlabel
net="V3_3"
schX={-5}
schY={-10.5}
connectsTo={sel.JP5.pin2}
anchorSide="bottom"
/>
<netlabel
net="SCL"
schX={-5.2}
schY={-10.7}
connectsTo={sel.JP5.pin4}
anchorSide="right"
/>
<netlabel
net="SDA"
schX={-5.2}
schY={-10.9}
connectsTo={sel.JP5.pin3}
anchorSide="right"
/>
<netlabel
net="GND"
schX={-5}
schY={-11.5}
connectsTo={sel.JP5.pin1}
anchorSide="top"
/>
</board>
)
}