tinsangbeeping/my_led_testing

This code defines a React component that creates an electronic module with an 8-pin microcontroller (like ATMEGA328P) connected to an external 2-pin header, including an internal signal path with a resistor and LED for visual indication, plus optional decoupling capacitor.

Version: 0.0.1
License: unset
Stars: 0

dist/index.d.ts

PCB

Schematic

type ChipWithLedSignalProps = {
    /** Instance name prefix so you can reference parts from parent traces */
    name?: string;
    /** Where the block appears on the schematic */
    schX?: number;
    schY?: number;
    /** Pick any 8-pin part; example uses ATMEGA328P just like you showed */
    manufacturerPartNumber?: string;
    /** LED / R values */
    ledColor?: "red" | "green" | "blue" | "yellow" | "white";
    ledFootprint?: string;
    resistorValue?: string;
    resistorFootprint?: string;
    decouplingCap?: string;
    capFootprint?: string;
};
/**
 * A reusable “block”:
 * - Exposes two named external pins via a 2-pin header: SIGNAL and GND
 * - Internally closes the loop: SIGNAL -> R -> LED -> GND
 * - Connects SIGNAL/GND to the chip (pin1=SIGNAL, pin8=GND)
 * - Leaves chip pins 2..7 free for the parent circuit to wire
 */
declare function ChipWithLedSignal({ name, schX, schY, manufacturerPartNumber, ledColor, ledFootprint, resistorValue, resistorFootprint, decouplingCap, capFootprint, }: ChipWithLedSignalProps): any;
/** Example parent file: place the block and then wire to its *remaining* chip pins 2..7 */
declare function ParentCircuit(): any;

export { ChipWithLedSignal, ParentCircuit as default };