techmannih/usbc-charger

This code defines a detailed electronic hardware design for an 85-265VAC to USB-C PD 18W wall charger, including the schematic layout and physical component placements such as connectors, filtering inductors, capacitors, resistors, protection diodes, and an isolated power module, all integrated with 3D models and mechanical enclosures.

Version
1.0.7
License
unset
Stars
0

imports/PESD5V0H1BSF.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["pin1"],
  pin2: ["pin2"]
} as const

export const PESD5V0H1BSF = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      symbol={
        <symbol>
          {/* EasyEDA imports custom symbols as fixed geometry, so define this
              shunt clamp vertically: protected signal above, GND below. */}
          <port name="pin1" pinNumber={1} aliases={["1"]} direction="up" schX={0} schY={0.4} schStemLength={0.2} />
          <port name="pin2" pinNumber={2} aliases={["2"]} direction="down" schX={0} schY={-0.4} schStemLength={0.2} />
          <schematicpath svgPath="M -0.14 0.2 L 0 0 L 0.14 0.2 Z" strokeColor="#880000" />
          <schematicpath points={[
            { x: 0.14, y: -0.04 },
            { x: 0.08, y: 0 },
            { x: -0.08, y: 0 },
            { x: -0.14, y: 0.04 },
          ]} strokeColor="#880000" />
          <schematicpath svgPath="M 0.14 -0.2 L 0 0 L -0.14 -0.2 Z" strokeColor="#880000" />
        </symbol>
      }
      supplierPartNumbers={{
  "jlcpcb": [
    "C477989"
  ]
}}
      manufacturerPartNumber="PESD5V0H1BSF"
      footprint={<footprint>
        <smtpad portHints={["pin2"]} pcbX="0.225044mm" pcbY="0mm" width="0.2500122mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-0.225044mm" pcbY="0mm" width="0.2500122mm" height="0.350012mm" shape="rect" />
<silkscreenpath route={[{"x":-0.39999920000002476,"y":0.24998679999998785},{"x":-0.4500118000000839,"y":0.24998679999998785}]} />
<silkscreenpath route={[{"x":-0.39999920000002476,"y":-0.250012199999901},{"x":-0.4499864000000571,"y":-0.250012199999901},{"x":-0.4500118000000839,"y":-0.24998679999998785}]} />
<silkscreenpath route={[{"x":0.45003719999988334,"y":-0.24998679999998785},{"x":0.4000245999999379,"y":-0.24998679999998785},{"x":0.39999919999991107,"y":-0.250012199999901}]} />
<silkscreenpath route={[{"x":0.39999919999991107,"y":0.24998679999998785},{"x":0.45003719999988334,"y":0.24998679999998785}]} />
<silkscreenpath route={[{"x":-0.4500118000000839,"y":0.2500122000000147},{"x":-0.4500118000000839,"y":-0.24998679999998785}]} />
<silkscreenpath route={[{"x":0.45003719999988334,"y":0.2500122000000147},{"x":0.45003719999988334,"y":0.018084799999996903},{"x":0.45003719999988334,"y":-0.24998679999998785}]} />
<silkscreenpath route={[{"x":-0.39999920000002476,"y":-0.250012199999901},{"x":0.39999919999991107,"y":-0.250012199999901}]} />
<silkscreenpath route={[{"x":-0.39999920000002476,"y":0.24998679999998785},{"x":0.39999919999991107,"y":0.24998679999998785}]} />
<silkscreentext text="{NAME}" pcbX="-0.0127mm" pcbY="1.254mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-0.7072000000000571,"y":0.5040000000000191},{"x":0.6817999999998392,"y":0.5040000000000191},{"x":0.6817999999998392,"y":-0.5039999999999054},{"x":-0.7072000000000571,"y":-0.5039999999999054},{"x":-0.7072000000000571,"y":0.5040000000000191}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C477989.obj?uuid=7c2a8f918eaa40f59db7d52d71a0e531",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C477989.step?uuid=7c2a8f918eaa40f59db7d52d71a0e531",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0.000012699999956566899, z: -0.01 },
      }}
      {...props}
    />
  )
}