techmannih/usbc-charger

This code defines a detailed electronic hardware design for an 85-265VAC to USB-C PD 18W wall charger, including the schematic layout and physical component placements such as connectors, filtering inductors, capacitors, resistors, protection diodes, and an isolated power module, all integrated with 3D models and mechanical enclosures.

Version: 1.0.7
License: unset
Stars: 0

.claude/skills/tscircuit/templates/minimal-board.tsx

// Minimal board with two components and trace connectivity.
import React from "react"

export default () => (
  <board width="10mm" height="10mm">
    <resistor name="R1" resistance="1k" footprint="0402" pcbX={-2} schX={-2} />
    <capacitor name="C1" capacitance="100nF" footprint="0402" pcbX={2} schX={2} />

    <trace from=".R1 > .pin1" to=".C1 > .pin1" />
    <trace from=".R1 > .pin2" to="net.GND" />
    <trace from=".C1 > .pin2" to="net.GND" />
  </board>
)