techmannih/usbc-charger

This code defines a detailed electronic hardware design for an 85-265VAC to USB-C PD 18W wall charger, including the schematic layout and physical component placements such as connectors, filtering inductors, capacitors, resistors, protection diodes, and an isolated power module, all integrated with 3D models and mechanical enclosures.

Version: 1.0.7
License: unset
Stars: 0

.agents/skills/tscircuit/elements/switch.md

# `<switch />`

A switch is a mechanical device that can be used to connect or disconnect a circuit.

## Example

```tsx
export default () => (
  <switch name="SW1" type="spst" />
)
```

## Props

Commonly used: `type`, `isNormallyClosed`, `spdt`, `spst`, `dpst`, `dpdt`, `simSwitchFrequency`, `simCloseAt`

## Side-actuated switches

A switch whose lever exits the side of its body is *installed* from above and
*actuated* from the side. Say both on the footprint, or its enclosure opening
lands in the lid above a lever that points at a wall:

```tsx
<footprint insertionDirection="from_above" cutoutApertureDirection="from_top">
  {/* pads; the lever exits the +Y side of the unrotated footprint */}
</footprint>
```

See [`<footprint />`](./footprint.md#insertion-and-aperture-directions).

## References

- Props: [SwitchProps](https://github.com/tscircuit/props#switchprops-switch)
- Source: [lib/components/switch.ts](https://github.com/tscircuit/props/blob/main/lib/components/switch.ts)
- Local docs: [docs/docs/elements/switch.mdx](../docs/docs/elements/switch.mdx)