techmannih/usbc-charger

This code defines a detailed electronic hardware design for an 85-265VAC to USB-C PD 18W wall charger, including the schematic layout and physical component placements such as connectors, filtering inductors, capacitors, resistors, protection diodes, and an isolated power module, all integrated with 3D models and mechanical enclosures.

Version: 1.0.7
License: unset
Stars: 0

.agents/skills/tscircuit/elements/subcircuit.md

# `<subcircuit />`

A `<subcircuit />` is a powerful organizational element in tscircuit that represents a collection of elements that are tightly coupled. Subcircuits are often used for a small functional block, such as a voltage regulator.

## Example

```tsx
export default () => (
  <board width="10mm" height="10mm">
    <subcircuit name="subcircuit1" schX={-2}>
      <resistor name="R1" resistance="1k" footprint="0402" />
    </subcircuit>
    <subcircuit name="subcircuit2" schX={2}>
      <resistor name="R2" resistance="1k" footprint="0402"  />
    </subcircuit>
    <trace from=".subcircuit1 .R1 .pin1" to=".subcircuit2 .R2 .pin1" />
  </board>
)
```

## Props

Commonly used: `name`, `footprint`, `connections`

## References

- Props: [SubcircuitProps](https://github.com/tscircuit/props#subcircuitprops-subcircuit)
- Source: [lib/components/subcircuit.ts](https://github.com/tscircuit/props/blob/main/lib/components/subcircuit.ts)
- Local docs: [docs/docs/elements/subcircuit.mdx](../docs/docs/elements/subcircuit.mdx)