techmannih/usbc-charger

This code defines a detailed electronic hardware design for an 85-265VAC to USB-C PD 18W wall charger, including the schematic layout and physical component placements such as connectors, filtering inductors, capacitors, resistors, protection diodes, and an isolated power module, all integrated with 3D models and mechanical enclosures.

Version: 1.0.7
License: unset
Stars: 0

.agents/skills/tscircuit/elements/pcbnotedimension.md

# `<pcbnotedimension />`

The `<pcbnotedimension />` element adds dimension annotations to PCBs showing measurements between two points.

## Example

```tsx
export default () => (
  <board width="20mm" height="15mm">
    <resistor name="R1" resistance="10k" footprint="0402" pcbX={-3} pcbY={0} />
    <resistor name="R2" resistance="10k" footprint="0402" pcbX={3} pcbY={0} />
    <pcbnotedimension
      from={{ x: -3, y: 2 }}
      to={{ x: 3, y: 2 }}
      arrowSize={0.8}
      fontSize={1.5}
      color="#ffffff"
    />
  </board>
)
```

## Props

Commonly used: `from`, `to`, `text`, `offset`, `font`, `fontSize`, `color`, `arrowSize`

## References

- Props: [PcbNoteDimensionProps](https://github.com/tscircuit/props#pcbnotedimensionprops-pcbnotedimension)
- Source: [lib/components/pcb-note-dimension.ts](https://github.com/tscircuit/props/blob/main/lib/components/pcb-note-dimension.ts)
- Local docs: [docs/docs/elements/pcbnotedimension.mdx](../docs/docs/elements/pcbnotedimension.mdx)