techmannih/usbc-charger

This code defines a detailed electronic hardware design for an 85-265VAC to USB-C PD 18W wall charger, including the schematic layout and physical component placements such as connectors, filtering inductors, capacitors, resistors, protection diodes, and an isolated power module, all integrated with 3D models and mechanical enclosures.

Version: 1.0.7
License: unset
Stars: 0

.agents/skills/tscircuit/elements/analogsimulation.md

# `<analogsimulation />`

Configure and run SPICE simulations for a tscircuit board.

## Example

```tsx
export default () => (
  <board routingDisabled>
    <voltagesource name="V1" voltage="5V" />
    <resistor name="R1" resistance="1k" />

    <trace from=".V1 > .pin1" to=".R1 > .pin1" />
    <trace from=".V1 > .pin2" to=".R1 > .pin2" />

    <voltageprobe name="VP_IN" connectsTo=".V1 > .pin1" />
    <voltageprobe name="VP_OUT" connectsTo=".R1 > .pin1" />

    <analogsimulation duration="10ms" timePerStep="0.1ms" spiceEngine="ngspice" />
  </board>
)
```

## Props

Commonly used: `simulationType`, `duration`, `timePerStep`, `spiceEngine`, `name`, `footprint`, `connections`

## References

- Props: [AnalogSimulationProps](https://github.com/tscircuit/props#analogsimulationprops-analogsimulation)
- Source: [lib/components/analogsimulation.ts](https://github.com/tscircuit/props/blob/main/lib/components/analogsimulation.ts)
- Local docs: [docs/docs/elements/analogsimulation.mdx](../docs/docs/elements/analogsimulation.mdx)