techmannih/nema34-mounted-stepper-controller

A 48 V USB‑C PD 3.1 EPR NEMA‑34 stepper controller PCB combining STM32/TMC5160 control, external MOSFET motor bridges, protected power and regenerative braking, USB data, telemetry, diagnostics, status LEDs, and buzzer alarms.

Version
0.3.92
License
unset
Stars
1

imports/W25Q32JVSSIQ.tsx

// Stable component wrapper; selected M variant is reviewed in docs/sourcing-resolution.md.
import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["N_CS"],
  pin2: ["DO_IO1"],
  pin3: ["WP__IO2"],
  pin4: ["GND"],
  pin5: ["DI_IO0"],
  pin6: ["CLK"],
  pin7: ["HOLD__or_RESET__IO3"],
  pin8: ["VCC"]
} as const

const pinAttributes = {
  pin4: {requiresGround: true},
  pin8: {requiresPower: true}
} as const

export const W25Q32JVSSIQ = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C6000508"
  ]
}}
      manufacturerPartNumber="W25Q32JVSSIM"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-1.905mm" pcbY="-3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin2"]} pcbX="-0.635mm" pcbY="-3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin3"]} pcbX="0.635mm" pcbY="-3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin4"]} pcbX="1.905mm" pcbY="-3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin8"]} pcbX="-1.905mm" pcbY="3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin7"]} pcbX="-0.635mm" pcbY="3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin6"]} pcbX="0.635mm" pcbY="3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<smtpad portHints={["pin5"]} pcbX="1.905mm" pcbY="3.530092mm" width="0.6299962mm" height="2.2500082mm" radius="0.3149981mm" shape="pill" />
<fabricationnotepath route={[{"x":-2.6387044000000515,"y":-2.1763989999999467},{"x":-2.6387044000000515,"y":2.1763990000000604},{"x":2.6387044000000515,"y":2.1763990000000604},{"x":2.6387044000000515,"y":-2.1763989999999467},{"x":-2.6387044000000515,"y":-2.1763989999999467}]} />
<silkscreencircle pcbX="-1.905mm" pcbY="-1.423924mm" radius="0.150114mm" />
<silkscreencircle pcbX="-2.672334mm" pcbY="-3.530092mm" radius="0.150114mm" />
<courtyardoutline outline={[{"x":-2.9000074000000495,"y":4.905096100000037},{"x":2.8999820000000227,"y":4.905096100000037},{"x":2.8999820000000227,"y":-4.905096100000037},{"x":-2.9000074000000495,"y":-4.905096100000037},{"x":-2.9000074000000495,"y":4.905096100000037}]} />
      <silkscreentext text="{NAME}" pcbX="0mm" pcbY="5.91mm" anchorAlignment="center" />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C179173.obj?uuid=4652e19b90fa4dbb8662aa4cba61a532",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C179173.step?uuid=4652e19b90fa4dbb8662aa4cba61a532",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0.000012700000070253736, y: -0.000012699999956566899, z: -0.069425 },
      }}
      {...props}
    />
  )
}